GE (N) P/T- 03 OF 2026-2027 PROVN OF MT VEH PARKING SHED FOR GS/SHELTER VEH INFRONT OF BLDG NO P-82 AT ILP LOC OF HQ 3 EW BDE PROVN OF 04 X TOILET 04 X BATHROOM WASHING POINT OVER HEAD SHELTER T-4 T-5 BLDG(OR LIVING UNDER AGE B/R (E) OF GE (N) PUNE

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (40mm graded agg) as in foundations,filling and mass concrete complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks 1:3:6, type C-1, exc 10cm in width and setting in mortar in CM 1:6 complete all as speified and directed

M&L for 40mm thick DPC (Damp proof course) to horizontal or vertical surfaces in cement concrete 1:2:4 type B-0 (using 12.5mm graded agg) incl necessary form work over laying of polythene film 50 micron thick laid on a coat of bitumen primer @ 0.30 to 0.50kg/sqm complete all as specified and directed.

S&F for Mild steel TMT bars 6-8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as directed

-Ditto- all as per item No 7 here in before but 6mm to 8mm bars for stirrups

Use & formwork to sides and soffits of floor or roof beams,columns, lintels, cantilevers, shelves and similar work etc complete all as specified and directed

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of cement base paint on new surface all as specified.