REPAIR_ REPLACEMENT OF GLASS WALL ROOF SHEET FALSE CEILING ALUMINIUM JOINERY FLOORING AT M ZONE UNDER BR_I OF GE 868 EWS

Amount

Dismantling of AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .

Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.

Demolition of pre-cast concrete articles jaffary wall complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing.

M&L for Hard core, broken stone/bolders to gauge n exc 63 mm

M&L for PCC 1:3:6 type C2 (40mm graded stone agg) 75mm thick as in floor/plinth protection and paving finishing even and smooth without using extra cement.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor.

M&L for 10 mm thick plaster in cement mortar 1:4

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete.

M&L for non - skid coloured joint free vitrified tiles 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 20 above here-in-before but in skirting.

S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like bedded over and including 15mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed.

S&F stainless steel tubesing shape cutting, bending, welding as in railing, gate etc including all fittings, complete all as specified and directed.

S&F 12mm thck toughened clear glass, best quality square exc 0.50 sqm each panes, fixed to and including steel framefancy type complete all as specified as directed.

SHRI RAJNATH SINGH

M/S RAHUL TRADING CO.

PERFECT BUILDERS AND SUPPLIERS

commercial enterprises

SK SINGH

m/s chakraborty enterprises