PROVN OF PCC HARD STANDING PROVN OF WALKING PASSAGE PARKING SHED AND PARTITION IN ATC BUILDING PROVN OF RUNWAY CONTROLLER HUT AND PROVN OF MODULAR WORK STATION FOR BASE OPERATION CENTRE AND COMSTAN AT ICGS RATNAGIRI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out soft/loose soil

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/disintegrated rock

M&L for excavation in trenches not exc. 1.5 m in depth and not exc 1.5 m wide in soft disintegrated rock for foundation and getting out as directed by Engg in charge.

Excavating in post holes (or similar holes) in soft/disintegrated rock each n exc 0.5 cum, grtting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceding 25cm all as directed

Removing excavated material to a distance not exceeding 50 m and depositing where directed at level n exc 1.5 m above the starting point all as directed.

Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick for soft/disintagrated rock.

Removal of excavated rock to a distance exceeding 1.5 Km and not exc 5 Km and dspositing where directed

M&L for hard core of gauge 40 to 80 mm, deposited, spread and levelled in layers n exc 75 mm thick watered and rammed to a true surface with broken stone or boulders

M&L for PCC (1:4:8) type D2 using 40 mm graded aggregate as foundation all as specified and directed.

M&L for PCC (1:4:8) type D2, using 40 mm stone aggregate as in sub base 75 mm thick finished even and fair all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in flooring, 100 mm thick , finishing even and smooth without using extra cement all as specified and laying in alternate bays

M&L for PCC (1:2:4) , type B1 , using 20 mm graded stone aggregate as in mud stops , rounded or chamfered on edges

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as directed by Eng in charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as directed by Eng in charge.

M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars complete all as directed by Eng in charge.

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars complete all as directed by Eng in charge.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like

M&L RCC Design mix M-30, using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as directed by Eng in charge.

M&L RCC Design mix M-30, using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as directed by Engg in charge.

M&L RCC Design mix M-30, using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed by Eng in charge.

M&L RCC Design mix M-30, using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as directed by Eng in charge.

M&L Pre cast RCC cover slab 1: 2: 4 type B1 using 20mm graded stone aggregate set CM 1:4 all as directed.

M & L for walling of squared rubble using locally found machine cut laterite stone, regular coursed, well bonded , bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

Rendering 10mm thick CM 1:4 on fair faces of stone masonry wall surfaces, finished even and fair to receive glazed tiles.

M&L Rendering in for 15mm thick in CM 1:6 on fair faces of laterite stone masonary all as specified and directed

M&L for 10 mm thick rendering in cm 1:6 on stone masonary surfaces, finished even and smooth without using extra cement.

M&L for rendering 15 mm thick plaster on brick masonary/ concrete surface in CM(1:4) in two coats (10 mm backing coat + 5 mm thick finishing coat) finished even and smooth without using extra cement including mixing of integral water proofing compound in 5mm thick finishing coat etc complete all as specified and directed.(Note:- WPC will be meausred seperately.

Supply on liquid water proofing compound

M&L for 5 mm thick rendering in CM 1:3 on ceiling concrete surfaces finished even and smooth without using extra cement.

M/L preparing newly plastered surfaces and applying three coats of whitewash on ceiling all as specified and directed.

M&L for rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240

S&F Bands, straps, supports or stays for rainwater, entailing pipes, including bolts, if required:hooks (stay), haevy, for large wall tiles; plain angle cleats for securing purlins to wood truses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified an directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self stapping screws as specified

S&F mild steel, plain, black sheet 2.50 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40 mm lap joints with riverted or welded seams, including bending or turning up, mitred angles,etc. as required

M&L for 6mm thick asbestos cement, corrugated or semi- corrugated sheets in roofs,walls,etc.

M&L for 2nd class hard wood plain fillets wrought , square or rectangular in section of sectional area exceeding 3 and not exceeding 06 sq. Cm , secured with nails, brads or screws, adhesive etc:- all as specified and as directed .

M&L 2nd class hard wood, clean sawn, in scantling timber frame and fixed with nails complete all as specifed and directed.

M&L for second class hard wood plain fillets wrought , square or rectangular in section of sectional area exceeding 13 sq.CM and not exceeding 25 sq. Cm , secured with nails, brads or screws etc:- all as specified and as directed .

M&L plain fillet second class soft wood exc 13 and n.exc 25 Sqcm square rectangular or tringular in section bullnosed, splayed chamfered secured with nails etc complete all as specifed and directed.

S&F plywood 9mm thick, grade BWR, type BB, fixed with screws to timber frame work at wall panelling complete all as specified and directed.

M&L for 0.9mm mm th Decorative laminates type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manfufacturers instructions all as specified and directed

M&L for 18/19 mm thick Prelaminated particle board, interior grade , prelaminated on one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work all as specified and directed.

M&L for 9 mm thick Prelaminated particle board, interior grade , prelaminated on one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work all as specified and directed.

M&L for applying two coats of creosote oil including preparing surface of wood and wood based materials , new or old of any description or girth all as specified and directed .

Preparing new plaster surface of wall of any description and apply two coats of oil bound distember with 3 mm wall care putty all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on steel & iron surfaces of any description, not otherwise described, over 10 cm width or girth including preparation of new surface

M&L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, n exc 10 cm width or girth including preparation of new surface & applying one coat of red oxid/zinc chrome primer all as specified and directed

M/L preparing newly plastered surfaces and applying three coats of whitewash on walls all as specified and directed.

Preparation of new timber surface of width or girth exc 10cm and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F aluminium powder coated sliding window/doors and glass window consisting of stranded section for frames and necessary handles, roller wheels, hinges rubber beading, lock etc complete. Note :- Wt of aluminium shall be measured exclusive of all fittings feature hinges, handle bolts and locking arrangements.

M/L aluminium powder coated window and ventilator shutters, fixed type/ side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, Powder coated aluminium snap beading, screws etc. complete all as specified

S&F sheet glass ordinary quality, 5mm thick and glazing with oil putty/ beads in squares exc 0.5 sqm

S&F for 12mm thick toughend glass seleted quality in squares and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips in etc. all as specified and directed

S&F frosted film on glass , pattern as approved, fixed with glass as per instructions all as specified and directed.

S&F sheet glass ordinery quality, 4mm thick and glazing with oil putty/wooden beads in squars exc 0.5 sqm each but with pin headed/figured glass.

S&F prelaminated particle board, interior grade 12mm thick prelaminated both side with decorative choice lamination & other side balancing with lamination, fixed with screws to aluminium frame work

S&F PVC (SWR) pipes110mm dia bore single socketed in any length with rubber ring joints fixed to walls

M&L Double action floor spring hydraulically regulate made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

M& L for 400 mm long stainless steel handle fixed on glass door all as specified and directed.

M/L 20mm dia 3 - layer PP-R polypropylene random copolymer pipes SDR 7.4 and SDR 11 UV stabilised and antimicrobial fusion welded having theramal stability for hot & cold water supply all PP-R palin and brass threaded polypropylene random fittings laid in trenches complete.

M/L 25mm dia 3 - layer PP-R polypropylene random copolymer pipes SDR 7.4 and SDR 11 UV stabilised and antimicrobial fusion welded having theramal stability for hot & cold water supply all PP-R palin and brass threaded polypropylene random fittings laid in trenches complete.

M&L mild steel chequered plates confiriming to Fe 410-W (Gde-E-250) quality- A 5mm thick or over in thickness in available sizes cutting to required sizes and fixing all included directed by Eng In charge.

Screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor tiles.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and directed..

Machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Granite of 20mm thick (any type )of work (table rubbed and polished) in steps , jambs , pillars , window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1 :2) using marble dust with admixture of pigment to match with shade of granite.

S&F glazed ceramic tiles 350 x 250 x 7mm/ 450 x 350 x 7mm thick coloured on vertical surfaces such as dado skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube, fixed in position as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with prelaminated colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelaminated sheet PVC sheets for top rail, lock rain & bottom rail panelling of plain gap insert for top rail & bottom rail paneling of prelaminated PVC sheet 10mm to be fitted in the MS frame selded/sealed to the stiles & rails (stiles and rails feathered at edge) with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F aluminium powder coated barrel tower bolts of extruded section 150 mm long.

S&F Aluminium alloy powder coated sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F stainless steel Butt hinge 100mm size.

S&F butt hinges of size 100 mm extruded aluminium alloy with galvanised mild steel hinge pin , anodised and fixed type B-21 all as specified and directed.

S&F continous (Piano) Hinges of width 30mm of flaps(when open) ,mild steel,bright finish or electrogalvanised all as specified and directed.

S&F brass handles of 100 mm size , fabricated type, polished all as specified and directed.

S&F brass handles of 75 mm size, fabricated type, polished all as specified and directed.

S&F Hasp & staple of size 75 mm , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F extruded aluminium alloy, fabricated type handle, powder coated 150mm long

Aluminium alloy, anodised,sliding door bolt 200mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or xtruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F PVC high level /low level flushing cistern, 10 Ltrs capacity including float valve , chain, PVC pipe .

Supply only flush pipe of polythelene of low or high density or PVC 32 mm dia for high level flushing cistern, including all joints and making good existing floor surface.

S & F 15mm dia bib taps standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs.

S &F 15mm stop valves PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs .

S & F PVC connections, 450 mm long with PTMT nuts suitable for connecting 15 mm dia pip[es, superior quality, fixed in repairs.

S&F PVC (SWR) pipes110mm dia bore single socketed in any length with rubber ring joints fixed to walls

S&F CPVC tank adaptor 25mm bore fixed to PVC tank complete.

S&F Floor trap PVC(SWR) with grating including jointing with solvent cement of size 75mm complete fixed in repairs.

S&F PVC(SWR) pipe 75mm bore, single socketed in any length with rubber ring joints fixed to wall complete all as specified.

S&F PVC(SWR) bends of any radius diminishing pieces or tappers,110mm bore with access door.

S&F PVC(SWR) bends of any radius diminishing pieces or tappers,75 mm bore with access door.

S&F wash basins 450x300mm vitreous china (flat back type) any size including cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings

S&F 15mm dia pillar taps of PTMT any colour high pressure screwd for iron pipe and fixed.(Minimum weight 15mm-110gms)

M&L making connection of PP-R distribution branch with PP-R main of following sizes (from 16 to 40mm) by providing and fixing tee including cutting and making fusion joint etc.

S&F PP-R gate valves (brass insert) of 20mm dia as per requirement of the site

S&F PP-R gate valves (brass insert) of 25mm dia as per requirement of the site

S&F rectangular loft type plastic water tank of 300 Ltr capacity including inlet and outlet adaptors suitable for PP-R pipes complete of approved quality.

M&L for gypsum ceiling boards, decorative type prepainted of size 600x600x9 to 9.5 mm thick laid over and including grid work of size 600x600 mm made out of 05mm thick GI tee 32x24mm for main, 25x24 mm for cross tee and 20x20 mm angle fixed on wall, powder coated finish on exposed face of tee and angle, hung from ceiling using 3mm dia GI suspension wire spaced at 1200mm on main runners including making niches for fans/light complete all as speicified and directed.

M&L stairs (farmed) including stringers, treades, landing, blusters, hand rails etc. including cleats, brackets, confirming to Fe-290(Gde E-165).

S&F Vitreous china wash down water closet (Pedestal pattern) (EWC) white, including fixing complete with ‘P’ or ‘S’ trap, fixed as in repairs complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size 2 core 6 sqmm.

Supply, install & testing of solar hybrid invertor UPS having capacity of 1400 VA/1.4 KVA at 12 Volts with fast charging technology for charging & including tubular battery minimum capacity 150 AH suitable to charge from solar as well as from electric supply. Solar panel should be poly crystelline module 160 watt, 12 Volts (02 Nos) , IEC & MNRE approved and able to generate excellent energy in weak lights, stable performance due to IP 67, water proof junction box, wind load of upto 2400 Pa and heavy snow load of upto 5400 Pa. Materials should be anti PID technology.The system should be certified ISO 14001 Environment management system, OHSAS 18001 International Standard for occupational health & safety certified and confirm to IEC 61215 and IEC 61730A. Installations of fixtures, wires and fixing material are included in quoted rates. (Note- Manufacturer warrenty of minimum 15 years of all system is required).

M&L for point wiring complete with proper colour code, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS- 694:1190, Part ll with ISI marked and including PVC conduit medium grade not less than 25mm dia, ISI marked with all accessories for concealed in wall/ ceiling/ floor/ roof etc, including PVC rectangular box of suitable size with PVC top sheet, including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following:- (a) One light point controlled by one switch.

(b) One ceiling fan / exhaust point controlled by one swith.

(c) One three pin switch socket 5 amps outlet on independent board.

S&F switch piano, flush type, single pole one way, 5 Amps 230 volts

S&F switch socket combination 2 in 1 , 3 pin 5 Amps 230 volts

S&F ceiling rose surface bakelite 65x50 mm with three terminals.

S&F surface wall mounted LED Regal (universal) battern 18W with ultra bright glass LED Tube with very high efficiency complete all as specified and directed all as per Havells cat Part No REGALBETTEN5UPTO1X18WDSBSWH and tube light cat Part No CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent in Philips / Crompton / Wipro.

S&F wall mounting fan 300 mm sweep connecting up including necessary fixing arrangement etc all as specified and directed.

S&F MCB DB SPN 4 way, having degree of protection as IP 43 with metal door (double door), 240 volts, complete with 200 amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 4 all as specfied and directed.

S&F MCB SPN 6 Amps

S&F MCB SP 6to 32 Amps

SHRIYA CONSTRUCTION

shrilaxminarayan constructions