SPECIAL REPAIR TO BLDG NO P-67 (05 QTRS) OF PTMS DEFENCE CIVILIAN MARRIED ACCN AND BLDG NO. P-65 (02 QTRS) IN DOMESTIC AREA AT OD AVADI AND CERTAIN REVENUE WORKS AT OD AND MH AVADI

Amount

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hotmixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified.

Demolition of cement conctrete (un-reinfoeced) of any description and in any position not otherwise specifically provided all as directed.

Removing plants, weeds etc., on chajjas, roofs, walls at any position and at any situation of height upto and including 03 storeys/10m, RCC roof parapets and sparying weed controlling chemical using glyphosate or equivalent in dosages as per manufactures

M&L for 50mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate with water proofing compound and finished even and fair complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof kerbs, benching etc rounded or chamfered angles and throating in with water proofing compound complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

Dismantling of APP based polymeric membrane reinforced with polyster non-woven fabric (measured flat and not girthed) complete all as specified and as directed

M&L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified

M&L brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified

M&L for 10 mm thick rendering in cm 1:4 with water proofing compound over levelling course, finished surfaces even and smooth without using extra cement all as specified.

Supply only Integral Water Proofing Compound conforming to IS all as specified.

M&L priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt , grade 2 complete all as specified.

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.2 kg per sqm applied on the cleaned surfaces complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing minimum 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified.

M&L for applying one coat of bituminous aluminium paint @100gms/sqm complete all as specified and as per manufactures instructions

M & L for rendering 15mm thick in CM 1:3 with water proofing compund on fair faces of brick on concrete slab & sides of sunken portion, finished even and smooth without using extra cement all as specified.

M & L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in, foundation filing and mass concrete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in flooring, complete all as specified and a directed.

M&L for 40mm bore UPVC pipe as in spout pipe for draining out water from sunken floor complete all as specified

Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

M&L for forming jambs etc to openings (to forgoing items) incl cutting , toothing and properly bonding into old work also facing, jointing and pointing to match existing work in Cement mortar 1:6 complete all as specified.

S&F Second class hardwood wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F 35mm thick 2nd class hard wood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive gauge etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay and guard bars complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawings.

S&F Factory made soild PVC profiled panel door shutter 28mm thick withintegral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as , with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site incl all fittings(handles/tower bolt/sliding bolt/hinges etc as per specifications and drawing.

M & L in repair for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with scruwes to timber frame work for cub board shutter.etc all as specified and as directed.

S&F in repairs particle boards 18/19mm thick interior grade BWR type adhesive, fixed with screw to timber frame in shelves,drawers etc, all as specified and as directed .

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, of brass polished finish all as specified.

S&F 300 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified.

S&F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified.

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&F 100mm long Aluminium handles, cast type, anodised, all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grills and grating etc complete all as specifired and as directed

S&F mild steel framed work such as grills, gratings, etc.. With ends of bars shouldered and/or riveted, or forged into spikes; frmed guard bars' barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar workon-forming to FE.290.Gde-E-165.

S&F 4mm thick Sheet glass ordinary quality, glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F in repair for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.in repair all as specified and as directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or stone masonry surfaces with water proof compound, even and smooth without using extra cement , complete all as specified. Note:- WPC will be measured and paid seperately.

M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement , complete, all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement, complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles size 300x200mm x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM 1:3, complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) screed bed, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over chalk whitening primer complete all as specified.

M&L Complete removal of existing treatment of wall and applying two coats of exterior emulsion paint, white or colour over one coat of Primer, including cleaning the floor / joinery, surfaces, glass panes complete all as specified.

M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint over chalk whitening primer complete all as specified.

M&L Complete removal of existing treatment of wall and applying two coats of exterior emulsion paint, white or colour over one coat of Primer, including cleaning the floor / joinery, surfaces, glass panes complete all as specified.

M&L for preparing newly plastered of ceiling surfaces and applying three coats of white wash complete all as specified.

M&L for preparing old plastered of ceiling surfaces and applying two coat of white wash complete all as specified.

Taking up or down steel water tubings and connections of 15mm bore pipe, complete all as specified and directed.

Taking up or down steel water tubings and connections of 20mm bore pipe, complete all as specified and directed.

S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

M&L 20 mm Tubes, medium grade galvanised, with all GI fitting and fixed complete to walls and ceilings or laid in floors all as specified.

S&F 15mm bore stop valve/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified

S&F15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank 1000 Litre capacity consisting of three layer cylindrical vertical with top closed hoisted and fixed in position inluding dismantling of old water tanks and removing to store all as specified and directed.

S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed.

S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen of laboratory with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece ,single (single Y) equal or unequal, complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F PVC (SWR) vent cowl complete all as specified

M&L for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1.No) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F teak wood lipping 18-19mm wide and 3-6mm thick for particle board shutters for cupboards fixed with nails all as specified.

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F for 125mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified.

S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L 15mm Tubes, medium grade' galvanised, with all GI fitting and fixed complete to walls and ceilings or laid in floors all as specified.

S&F in repairs Soap dish of PTMT fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, all as specified and directed.

Material and labour for repairs to RCC members as follows:- (1) Chipping, Cheselling surface mechanically with chipping machine. (2) Providing zinc rich primer for exposed reinforcement. (3) Providing 100x100x3mm weld mesh and fixing the same with shear connectors of 8 mm dia with epoxy resin. (4) Guniting the area with CM 1:3 of over all thickness 50mm in with two layers in small areas/patches complete all as specified and as directed.

M&L for crack repair work in walls:- Clean surface around crack, joint should be free from loose particles and dust, cutting 'V' shaped groove of size in range of 6 to 25 mm of width and depth along the crack line by machine or manually, then clean the groove by wire brush to remove loose particles and then washed by water jet, and fixing nozzle and repairing cracks using Fosroc Rendroc CS chemical with a proportion of 1 part of water to 2.5-3.0 part of renderoc CS by volume or w/p ration 0.36 by weight complete all as specified and as directed.

M&L for crack repair work in RCC areas :- Chipping the loose particles upto 300mm distance on both side of crack and depth 25mm behind the reinforcement bar and corrosion treatment done to existing rod and then bonding agent nitobond SBR applied to the surface, bottom shuttering to be provided before concrete pouring, and apply MICRO CONCRETE using Rendroc RG spl complete all as specified and as directed

Use and waste of formwork to suspended slabs such as roof slabs, floor slabs landings and similar work nexc 200mm thick; make rough finished surfaces complete all as specified and as directed

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs nexc 20cm wide sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but nexc 20 cm wide complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edge complete all as specified and as directed

M&L for RCC design mix M-30 using 20mm graded aggregates in slabs supported on walls, beams and columns in floors, roofs, chajjas, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per item no 114 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed

Excavating in post holes each not exc 0.5 Cum getting out hard and dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and as directed

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling mass concrete etc .complete all as specified and as directed

S & F Joist, channel, angle, or tee sections Fe-410-W(Gde E-250 quality A), fixed independently, without connection plate, etc.all as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W(Gde E-250 quality A) complete all as specified and as directed

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) quality ‘A’ complete all as specified and as directed.

M&L Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thickof an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified.

M&L Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thickof an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified.

Rendering 15mm thick in cm 1:4 on fair faces of brick work ,finished even and fair and all as specified.

M&L for 100mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate) as in sub base under floor/path all as specified and directed.

M&L 50 mm thick Plain cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in flooring, surfaces finished even and fair complete all as specified and directed.

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in CM 1:4 complete all as specified and directed

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and all as specified and directed

M&L 38mm wide glass strip, 3mm thick and all as specified and directed

S&F Steel windows with side hung shutters including projecting type hinge with steel handle, and steel peg stay and guard bar complete without glazing bars, dovetailed or welded complete all as specified.

S&F MS screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends. Each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long diameter of neck 16-20mm all as specified.

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out of hard/dense soil complete all as specified

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and as directed.

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for Note : Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

one light point controlled by one switch.

One Exhaust fan point controlled by one switch.(New wiring)

One ceiling fan point controlled by one switch and regulator

One bell / buzzer point controlled by one bell push

One switch socket outlet 3 pin 5 Amps on same board along with other switches

One switch socket outlet 3 pin 5 Amps on independent board.

All as per item No 134 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.

S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified.

S&F Bell push, flush type, single pole, 5 Amps, 240 volts complete all specified.

S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified.

S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.

S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.

S&F electronic fan regulator, flush type phenolic laminated sheet etc; as required.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of double poles and current carrying capacity SPN 40 to 63 AMP in the MCB DB complete with connection testing and commissioning complete all as specified.

S&F Bell , ding-dong type , AC, 215 volts, 50 HZ complete all as specified.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete with emergency LED lamp 12W capacity complete all as specified and directed.

S&F Surface and wall mounted LED tube light fitting, 20 W, batten type, PC housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

S&F Surface and wall mounted LED tube light fitting, 10 W, batten type, PC housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

S&F LED building security light fitting 30W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed.

Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly complete including taking down old submain wiring with accessories complete all as specified and as directed.

S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note :- Incoming and Outgoing MCB measured separately relevent items.

S&F Load line MCB DB TP&N 4 way, vertical, double door, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for FP MCCB 100 Amps as incomer and SP MCBs 40 / 63 Amps as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming MCCB and Outgoing MCB measured separately relevent items. Make : Havells

S&F MCCBs100 Amps 415V,16KA, 4 Pole complete all as specified .

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.

Exhaust fan, heavy duty, 300mm sweep, 1400 RPM, with louvers, metal body conforming to IS-2312-1967, AC single phase, 240 Volts, 50 Hz and connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing and fixing arrangements like making hole in wall and finishing to shape to match adjoining surface complete all as specified and as directed.

Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed by Engr-in-Charge

Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia fixed on walls/steel structure and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for

one light point controlled by one switch.

One switch socket outlet 3 pin 5 Amps on same board along with other switches

One switch socket outlet 3 pin 5 Amps on independent board.

All as per item No 157 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.

S&F MCB DB SPN 4 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note :- Incoming and Outgoing MCB measured separately relevent items.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Returning, filling in, with soil obtained from excavation including spreading leveling watering well ramming in layers not exceeding 25 cm each all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

Laying in trenches Fine seived excavated dry soil including spreading / leveling, cushioning for underground cables all as specified and as directed.

Supply and laying of common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection all as specified and as directed.

Material and labour for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, 2 Core, 10 Sqmm laying in trench, on pole, on wall or on ceiling etc complete all as specified and as directed:- Note : Earth work including excavation ,returning Filling,removing,soil coushioning,brick covering for mechanical protection of cable etc will be measured and paid separately under respective items of schedule.

Material and labour for GI tubing light grade for cable protection laid in trenches in road crossing or fixed to wall/pole of size 20 mm dia complete all as specified and as directed

JANANIKARTHIK ENTERPRISES