Loading
Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹3.9 L
Closing Date
8 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
TRD
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared / audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15 (Annexure-VIB), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet. ( Click here to download Format)
The tenderers must submit the copy of valid Electrical License along with their offer. Offer shall rejected be summarily, if tenderer does not have valid Electrical License on the name of an individual / Proprietor / Partner / firm issued by the State / Central government.
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Tenderers shall submit requisite information on standard format for Completion / Performance Certificate as per Annexure-18 in support of 30% or 40% or 60% Similar Nature of work. ( Click here to download Format)
Definition of Similar Work: "Design, supply, erection testing & commissioning of 50Hz, single phase 25KV AC OHE". (Ref: OHE Works S.No. 1.1 of Pr. CEE/NR's Letter No. 181-Elect/ TRD/189/Pt. II, dated 29.07.2021)
32 conditions · 3 needing a document upload
Bid Security: Tenderer (s) may please note that offers received without Bid Security either in cash through e-payment gateway or as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents (as per Annexure- 21) valid for a period of 90 days beyond the bid validity period, will be considered as incomplete & invalid offer and for which contractor shall have no claim on Railway. ( Click here to download Format)
Following documents shall be submitted by Tenderer in support of Constitution of Firm: (A)SOLE PROPRIETOR SHIP FIRM: (i)Undertaking that he is not blacklisted/debarred by Rlys/other Ministry/Deptt of Govt of India from participation in tender on date of bid opening, either in individual capacity or as a member of partnership firm or JV in which he was/is a partner/member. Concealment/wrong information in regard to above shall make contract liable for determination under Clause62 of GCC. (B)HUF: a. Copy of notarized affidavit on Stamp Paper declaring that he who is submitting tender on behalf of HUF is in position of Karta of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. b. Undertaking that HUF is not blacklisted or debarred by Rlys/any other Ministry/Deptt of Govt of India, either in individual capacity or as a member of partnership firm or JV in which HUF was/is a partner/member. (C)PARTNERSHIP FIRM: (i)Notarized copy of partnership deed. (ii)Notarized or registered copy of Power of Attorney in favor of the individual to tender for the work, sign agreement etc and create liability against firm. (iii)Undertaking by all partners of partnership firm that they are not black listed/debarred by Rlys/any other Ministry/Deptt of Govt of India from participation in tenders/contracts as on date of bid opening, either in their individual capacity or in any firm in which they were/are partners. (iv)All details of Firm must be provided in Annexure-10. (v)Complete details as per Annexure- 17B. (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING > Rs.10 Cr (Not applicable for this tender). (E)Company registered under Companies Act-2013: Tenderer must submit/upload tender along with following documents: (i)Copies of MOA (Memorandum of Association)/AOA (Articles of Association). (ii)Copy of Certificate of Incorporation (iii)Copy of Authorization/Power of Attorney issued by Company (backed by Resolution of Board of Directors) in favor of the individual to sign tender on behalf of company and create liability against Company. (iv)Undertaking that Company is not blacklisted/debarred by Rlys/any other Ministry/Deptt of Govt of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of partnership firm or JV in which Company was/is a partner/member. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: Tenderer shall submit along with tender: (i)Copy of LLP Agreement (ii)Copy of Certificate of Incorporation (iii)Copy of Power of Attorney/Authorization issued by LLP in favor of individual to sign tender on behalf of LLP and create liability against LLP. (iv)Undertaking that LLP is not blacklisted/debarred by Rlys/any other Ministry/Deptt of Govt of India from participation in tender on the date of bid opening, either in individual capacity or as a member of JV in which LLP was/is a member. (G)Registered Society & Registered Trust: Tenderer shall submit: (i)Copy of Certificate of Registration. (ii)copy of Deed of Formation. (iii)Copy of Power of Attorney in favor of individual to sign tender documents and create liability against Society/Trust. (iv)copy of Rules & Regulations of Society. Note: Offers received without proper Power of Attorney shall be considered in-completed and rejected summarily.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall study the Indian Railway General Conditions of Contract Regulations for Tenders & Contracts (GCC)- April'2022 or latest along with tender documents before submission of the tender.
The tenderer shall submit all the requisite documents alongwith tender offer. Tender offer without these documents shall not be considered. "No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void".To assist in the examination, evaluation and comparison of offers received, the Railway may at their discretion, ask any Tenderer for clarification on attached document with their Tender. The request for clarification and the response shall be in writing or by FAX but no change in the price or substance of the Tender shall be sought, offered or permitted. In case no credentials enclosed or statement to that effect is mentioned, the identity of working contractor of division shall be taken as fresh.
Period of Completion : The entire work is required to be completed in all respect within specified period from the date of issue of the letter of acceptance. The contractor shall maintained steady and regular progress to the satisfaction of the Sr.DEE/TRD/FZR or his authorized representative and to ensure that the work will be completed in all respect within the stipulated time, failing which action may be taken by the Railway Administration in terms of clause 17 and clause 62 of the General Conditions of contract (GCC)- April'2022 or latest.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected. NOTE: (i) Copy of GCC of April'2022 is uploaded with NIT as ready reference of Tenderers. (ii) The offers received without proper Power of Attorney shall be considered in-completed and rejected summarily.
The rates quoted by the bidder are to be inclusive of all charges and all taxes levied by the Union of India, State Government and Local Bodies etc., from time to time including Surcharge except GST. However, GST @ 18% shall be paid extra as per Schedule- 04 on all items of Schedule-01, 02 & 03.
Night working : Though normally no work is carried out in night i.e., from sun set to sun rise the progress of the work if not coming up to the time schedule laid down in clause above the Engineer-in-charge can order for night working by the contractor and the contractor shall make all arrangements for adequate lighting and safety precautions etc., for night working.
Contractors will have to upload details of their LOAs, engaged workmen, wage payment details, PF/ESI details, bonus details etc, on website www.shramikkalyan.indianrailways.gov.in on monthly basis. (Railway Board's letter No. 2018/CE-I/CT/4 dated 17.10.2018)
Guarantee : The tenderer shall guarantee the equipments/installations for satisfactory performance for a period of 12 months or mentioned in special condition / technical specifications or as mentioned by the manufacturer, which ever in higher from the date of commissioning against any defect. The contractor should promptly attend complaint and replace/repair the defective equipments/parts free of cost promptly and satisfactorily. The equipments/parts so replaced by the contractor, shall be further guaranteed for a period of 12 months or mentioned in special condition / technical specifications or as mentioned by the manufacturer for satisfactory service from the date of such replacement.
The tenderers shall keep their offer open for 60 days (Sixty days).
The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the contractor has complete the work in all respects satisfactorily. The Security Deposit shall also be released based on 'Completion Certificate' issued by Consignee / Engineer In- charge of the work to the contractor, submission of authentic documents that firm has paid GST as applicable by the extant rule and on completion of guarantee / warrantee period of ONE Year or as stipulated in Tender Documents.
Ambiguous and incomplete (i.e. not filling the rates or controversial rates and not attaching all the required documents) offer may be summarily rejected.
Any typographical error shall not be construed to be benefit of the contractor; in such cases the interpretation and decision of Sr. DEE/TRD/FZR shall be final and binding upon the tenderer.
Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment modes available ON IREPS portal LIKE net banking, debit card, credit card etc Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc are not allowed.
For verification of documents tenderer has to submit the details of issuing authority and organization like-Postal address, Name, Designation, Office phone number, Mobile no. and email ID of concerned person.
TRD work in c/w Electrification of balance sidings and patches over Firozpur Division.
729-TRD-FZR-2025-26~NR
729-TRD-FZR-2025-26
Open
Works - General
12 Months
Firozpur, Punjab
₹0
₹3.9 L
8 Jan 2026
17 Dec 2025
25 Dec 2025
371 items across 4 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,79,08,783.56 | ||
| — | 558.00 | — | — | ||
| Supply of Concrete for foundation and plinth in other than hard & rocky soil | — | — | — | 37,60,663.32 | |
| — | 352.00 | — | — | ||
| Erection of Concrete for foundation and plinth in other than hard & rocky soil | — | — | — | 5,81,838.4 | |
| — | 181.00 | — | — | ||
| Erection of Concrete for foundation and plinth in hard & rocky soil | — | — | — | 11,70,744.2 | |
| — | 85.50 | — | — | ||
| Supply of galvanized steel fabricated masts / other supporting structure | — | — | — | 1,13,83,474.27 | |
| — | 85.50 | — | — | ||
| Erection of galvanized steel fabricated masts / other supporting structure | — | — | — | 8,41,487.58 | |
| — | 19.40 | — | — | ||
| Supply of fabricated and galvanized steel work (SPS) other than mast with necessary components | — | — | — | 26,41,958.93 | |
| — | 19.40 | — | — | ||
| Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components | — | — | — | 1,75,816.38 | |
| — | 190.00 | — | — | ||
| Supply of Single bracket assembly (without insulator) | — | — | — | 41,10,955.9 | |
| — | 190.00 | — | — | ||
| Erection of Single bracket assembly | — | — | — | 4,01,164.1 | |
| — | 150.00 | — | — | ||
| Supply of Stay and bracket tube Porcelain type insulators (CD 1050mm) for single bracket assembly | — | — | — | 16,07,697 | |
| — | 160.00 | — | — | ||
| Erection of insulators for single bracket assembly | — | — | — | 2,22,528 | |
| — | 9.36 | — | — | ||
| Supply of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | — | — | — | 2,49,120.33 | |
| — | 9.36 | — | — | ||
| Erection of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | — | — | — | 2,48,214.75 | |
| — | 48.00 | — | — | ||
| Supply of copper jumper wire | — | — | — | 3,57,980.16 | |
| — | 48.00 | — | — | ||
| Erection of copper jumper wire | — | — | — | 35,130.24 | |
| — | 29.00 | — | — | ||
| Supply of Guy Rod Assembly | — | — | — | 3,02,556.71 | |
| — | 29.00 | — | — | ||
| Erection of Guy Rod Assembly | — | — | — | 35,559.8 | |
| — | 65.00 | — | — | ||
| Supply of 9-Tonne Porcelain insulator (CD 1050mm) | — | — | — | 5,47,361.75 | |
| — | 65.00 | — | — | ||
| Erection of 9-Tonne insulator | — | — | — | 91,406.9 | |
| — | 14.00 | — | — | ||
| Supply of 9 tonne suspension insulator assembly including all accessories | — | — | — | 82,760.16 | |
| — | 14.00 | — | — | ||
| Erection of 9 tonne suspension insulator assembly including all accessories | — | — | — | 17,153.22 | |
| — | 24.00 | — | — | ||
| Supply of regulating equipment 3 pulley type ATD with counter weight | — | — | — | 17,45,761.92 | |
| — | 24.00 | — | — | ||
| Erection of regulating equipment 3 pulley type ATD with counter weight | — | — | — | 1,01,346.96 | |
| — | 9.00 | — | — | ||
| Supply of Section Insulator assembly including bar insulator assembly for conventional OHE | — | — | — | 4,94,852.58 | |
| — | 12.00 | — | — | ||
| Erection of Section Insulator assembly including bar insulator for conventional OHE | — | — | — | 40,396.92 | |
| — | 7.00 | — | — | ||
| Supply (without insulator) of 25KV Single Pole(SP) Isolator without earth contact assembly | — | — | — | 3,62,169.08 | |
| — | 8.00 | — | — | ||
| Erection of 25KV Single Pole(SP) Isolator without earth contact assembly | — | — | — | 36,081.44 | |
| — | 60.00 | — | — | ||
| Supply of 25KV post / pedestal insulators for isolators | — | — | — | 5,37,233.4 | |
| — | 60.00 | — | — | ||
| Erection of 25KV post / pedestal insulators for isolators | — | — | — | 22,986 | |
| — | 4.00 | — | — | ||
| Supply of an Earth contact assembly in an isolator | — | — | — | 31,943.76 | |
| — | 4.00 | — | — | ||
| Erection of an Earth contact assembly in an isolator | — | — | — | 4,469.96 | |
| — | 4.00 | — | — | ||
| Supply & erection of post and operating rod insulator | — | — | — | 80,450 | |
| — | 90.00 | — | — | ||
| Supply of copper bus bar 18mm | — | — | — | 1,25,129.7 | |
| — | 90.00 | — | — | ||
| Erection of copper bus bar 18mm | — | — | — | 11,063.7 | |
| — | 14.00 | — | — | ||
| Supply of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest | — | — | — | 57,921.78 | |
| — | 14.00 | — | — | ||
| Erection of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest | — | — | — | 18,808.58 | |
| — | 105.00 | — | — | ||
| Manufacturing supply of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement. | — | — | — | 71,009.4 | |
| — | 115.00 | — | — | ||
| Erection / Fixing of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement. | — | — | — | 9,789.95 | |
| — | 25.00 | — | — | ||
| Supply of material without insulators for termination of OHE conductor | — | — | — | 1,80,654.5 | |
| — | 24.00 | — | — | ||
| Erection of material for termination of OHE conductor | — | — | — | 24,433.44 | |
| — | 11.00 | — | — | ||
| Supply of splicing and extension of anchored over head equipment with components | — | — | — | 69,413.96 | |
| — | 12.00 | — | — | ||
| Erection of splicing and extension of anchored over head equipment with components | — | — | — | 68,115.6 | |
| — | 210.00 | — | — | ||
| Supply of Structure Bonds | — | — | — | 1,88,176.8 | |
| — | 210.00 | — | — | ||
| Erection of Structure Bonds | — | — | — | 46,578 | |
| — | 145.00 | — | — | ||
| Supply of Transverse (cross rail, inter-track, Z & special type) bonds | — | — | — | 1,52,386.3 | |
| — | 145.00 | — | — | ||
| Erection of Transverse (cross rail, inter-track, Z & special type) bonds | — | — | — | 22,000.85 | |
| — | 440.00 | — | — | ||
| Supply of Longitudinal bonds | — | — | — | 2,93,915.6 | |
| — | 440.00 | — | — | ||
| Erection of Longitudinal bonds | — | — | — | 62,387.6 | |
| — | 310.00 | — | — | ||
| Supply of earth bus | — | — | — | 70,698.6 | |
| — | 310.00 | — | — | ||
| Erection of earth bus | — | — | — | 24,914.7 | |
| — | 3.00 | — | — | ||
| Erection of bonds on platform area including drilling of holes in structure and rail including cutting of platform surface100mm x 500mm placing of bond and making good surface with PCC and providing cleats as per latest RDSO drawing | — | — | — | 7,605.99 | |
| — | 26.00 | — | — | ||
| Supply and fixing of cleat 02 Nos. for each structure Bond on platform wall with screw | — | — | — | 2,167.62 | |
| — | 23.00 | — | — | ||
| Platform cutting and covering with concrete according to Bond size | — | — | — | 6,848.02 | |
| — | 5.00 | — | — | ||
| Dismentling of OHE termination assembly | — | — | — | 5,627.45 | |
| — | 5.00 | — | — | ||
| Dismentling & removal of Anchor assembly | — | — | — | 4,380.2 | |
| — | 7.00 | — | — | ||
| Supply of Anti-Creep with componenet | — | — | — | 2,56,051.95 | |
| — | 7.00 | — | — | ||
| Erection of Anticreep with component | — | — | — | 22,615.25 | |
| — | 0.60 | — | — | ||
| Erection of Anticreep with component | — | — | — | 6,307.64 | |
| — | 11.00 | — | — | ||
| Dismantling of Bracket Assembly | — | — | — | 17,883.69 | |
| — | 12.00 | — | — | ||
| Cutting and removal of existing structure | — | — | — | 13,479.6 | |
| — | 5.00 | — | — | ||
| Dismantling of Guy Rod Assembly | — | — | — | 3,845.95 | |
| — | 1.60 | — | — | ||
| Dismantling of fabricated steel other than mast | — | — | — | 25,273.23 | |
| — | 0.35 | — | — | ||
| Dismantling of OHE / Alluminium Feeder Wire | — | — | — | 6,397.66 | |
| — | 4.00 | — | — | ||
| Dismantling of copper jumper | — | — | — | 2,730.08 | |
| — | 3.00 | — | — | ||
| Shifting of ATD / BWA from one mast to another | — | — | — | 12,496.92 | |
| — | 14.00 | — | — | ||
| Adjustment of Turnout or insulated / un-insulated overlap | — | — | — | 24,511.9 | |
| — | 3.00 | — | — | ||
| Dismantling of Three Puley type ATD & termination | — | — | — | 12,652.62 | |
| — | 6.00 | — | — | ||
| Dismantling of 9-Tonne insulator | — | — | — | 4,493.28 | |
| — | 1.00 | — | — | ||
| Erection of PTFE type short neutral assembly complete | — | — | — | 6,082.6 | |
| — | 1.00 | — | — | ||
| Dismentling of Anticreep | — | — | — | 2,122.74 | |
| — | 16.00 | — | — | ||
| Transfer of equipment from one support to another | — | — | — | 51,048.96 | |
| — | 70.00 | — | — | ||
| Supply of Large Copper Jumper wire 160 Sqmm | — | — | — | 1,37,242.7 | |
| — | 90.00 | — | — | ||
| Erection of Large Copper Jumper wire 160 Sqmm | — | — | — | 31,608.9 | |
| — | 100.00 | — | — | ||
| Supply of Large Span Wire (130 Sq mm) | — | — | — | 94,406 | |
| — | 100.00 | — | — | ||
| Erection of Large Span Wire (130 Sq mm) | — | — | — | 15,536 | |
| — | 10.00 | — | — | ||
| Supply of Large Span Ending (130 Sq mm) | — | — | — | 8,014.7 | |
| — | 10.00 | — | — | ||
| Erection of Large Span Ending (130 Sq mm) | — | — | — | 799.5 | |
| — | 1.00 | — | — | ||
| Supply of all aluminium feeder wire (AAC) 19/3.99mm including component | — | — | — | 2,71,583.61 | |
| — | 1.00 | — | — | ||
| Erection of all aluminium feeder wire (AAC) 19/3.99mm including component | — | — | — | 9,683.97 | |
| — | 0.14 | — | — | ||
| Supply of 150sq mm hard drawn copper cross feeder with component | — | — | — | 1,53,693.08 | |
| — | 0.14 | — | — | ||
| Erection of 150sq mm hard drawn copper cross feeder with component | — | — | — | 1,116.58 | |
| — | 5.00 | — | — | ||
| Supply and erection of "Electric Engine Stop" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 20,706.75 | |
| — | 5.00 | — | — | ||
| Supply and erection of "Caution unwire turnout" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 14,010.65 | |
| — | 5.00 | — | — | ||
| Supply and erection of "Caution live wire" Board size 400x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 12,212.6 | |
| — | 5.00 | — | — | ||
| Supply and erection of "Caution clearance to OHE nearby restricted" Board size 450x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 6,766.55 | |
| — | 5.00 | — | — | ||
| Supply and erection of "Power Block Working Limit" Board size 450x450x2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 7,633.7 | |
| — | 5.00 | — | — | ||
| Supply and erection of "Protective Area" Board size 12"x18" with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 13,936.4 | |
| — | 5.00 | — | — | ||
| Interlocking system for isolator make interprosing consisting: a) Bolt lock type L insertion A-01; b) Lock with key exchange box with key incription B & A | — | — | — | 69,442.25 | |
| — | 5.00 | — | — | ||
| Labour charges for fitting of interlocking system | — | — | — | 5,421.75 | |
| — | 20.00 | — | — | ||
| Vertical cutting of 90R or 52KG / 90 OUTS (if any type of rail) as per explanatory notes | — | — | — | 9,006 | |
| — | 100.00 | — | — | ||
| Supply of GI Bolt with Nut, washer etc of 20x280x57mm or 20x240x57mm suitable for all types of anchor mast/portals as per explanatory Notes and site requirements | — | — | — | 9,830 | |
| — | 100.00 | — | — | ||
| Erection of GI Bolt with Nut, washer etc of 20x280x57mm or 20x240x57mm suitable for all types of anchor mast/portals as per explanatory Notes and site requirements | — | — | — | 1,150 | |
| — | 7.00 | — | — | ||
| Handling, Leading, loading and Transportation charges for Railway supply material from different Railway sites and released material from different Railway sites, if any to concerned TRD Depot | — | — | — | 19,464.27 | |
| — | 1.00 | — | — | ||
| Supply of 25KV single pole vacuum / SF-6 Interruptor as per latest RDSO specifications | — | — | — | 3,03,945.09 | |
| — | 1.00 | — | — | ||
| Erection,testing & commissioning of 25KV single pole vacuum / SF-6 Interruptor as per latest RDSO specifications | — | — | — | 7,858.46 | |
| — | 5.00 | — | — | ||
| Supply of 25KV Potential Transformer type-I | — | — | — | 4,07,587.2 | |
| — | 5.00 | — | — | ||
| Erection, testing and commissioning of 25KV Potential Transformer type-I | — | — | — | 5,976.9 | |
| — | 1.00 | — | — | ||
| Supply of 25KV Double Pole Isolator (DPI) 1600Amp | — | — | — | 1,00,973.06 | |
| — | 1.00 | — | — | ||
| Instalation, testing and commissioning of 25KV Double Pole Isolator (DPI) 1600Amp | — | — | — | 6,197.61 | |
| — | 70.00 | — | — | ||
| Supply of aluminium bus bar 36mmx28mm | — | — | — | 66,703.7 | |
| — | 70.00 | — | — | ||
| Erection of aluminium bus bar 36mmx28mm | — | — | — | 5,130.3 | |
| — | 50.00 | — | — | ||
| Supply of 7 Core, 2.5 Sqmm,1.1 KV grade Copper conductor cable for control and indication. | — | — | — | 13,850 | |
| — | 50.00 | — | — | ||
| Laying, connecting, testing and commissioning of 7 Core, 2.5 Sqmm,1.1 KV grade Copper conductor cable for control and indication. | — | — | — | 873.5 | |
| — | 150.00 | — | — | ||
| Supply of 2 Core, 2.5 Sq mm,1.1 KV grade Copper conductor cable for catenary indicator. | — | — | — | 15,651 | |
| — | 150.00 | — | — | ||
| Laying, connecting, testing and commissioning of 2 Core, 2.5 Sq mm,1.1 KV grade Copper conductor cable for catenary indicator. | — | — | — | 2,743.5 | |
| — | 50.00 | — | — | ||
| Supply of 2 core, 4 Sqmm, 1.1 KV Grade copper conductor cable for 240V AC supply. | — | — | — | 7,485.5 | |
| — | 50.00 | — | — | ||
| Laying, connecting, testing and commissioning of 2 core, 4 Sqmm, 1.1 KV Grade copper conductor cable for 240V AC supply. | — | — | — | 976 | |
| — | 4.00 | — | — | ||
| Supply of aluminium bus bar connectors Bus terminal (6310) | — | — | — | 8,299.28 | |
| — | 4.00 | — | — | ||
| Erection of aluminium bus bar connectors Bus terminal (6310) | — | — | — | 159.72 | |
| — | 4.00 | — | — | ||
| Supply of aluminium bus bar connectors Bus terminal (6480) | — | — | — | 10,495.84 | |
| — | 4.00 | — | — | ||
| Erection of aluminium bus bar connectors Bus terminal (6480) | — | — | — | 307.76 | |
| — | 4.00 | — | — | ||
| Supply of aluminium bus bar connectors Bus splice (6490) | — | — | — | 11,601.36 | |
| — | 4.00 | — | — | ||
| Erection of aluminium bus bar connectors Bus splice (6490) | — | — | — | 150.08 | |
| — | 4.00 | — | — | ||
| Supply of aluminium bus bar connectors:- Terminal connector 36/20 (6530) | — | — | — | 11,130.28 | |
| — | 4.00 | — | — | ||
| Erection of aluminium bus bar connectors:- Terminal connector 36/20 (6530) | — | — | — | 137.48 | |
| — | 2.00 | — | — | ||
| Supply of aluminium bus bar connectors- Flexible Bus splice (6550) | — | — | — | 11,144.58 | |
| — | 2.00 | — | — | ||
| Erection of aluminium bus bar connectors- Flexible Bus splice (6550) | — | — | — | 708.18 | |
| — | 4.00 | — | — | ||
| Supply of Bus T connecotor (6500) | — | — | — | 12,782.16 | |
| — | 4.00 | — | — | ||
| Erection of Bus T connecotor (6500) | — | — | — | 177.04 | |
| — | 4.00 | — | — | ||
| Supply of Tap connector (6520) | — | — | — | 11,092.2 | |
| — | 4.00 | — | — | ||
| Erection of Tap connector (6520) | — | — | — | 226.12 | |
| — | 4.00 | — | — | ||
| Supply of Al. busbar connectors terminal connector Bolted Type (6830-I). | — | — | — | 5,736.04 | |
| — | 4.00 | — | — | ||
| Erection of Al busbar connectors terminal connector Bolted Type (6830-I). | — | — | — | 287.24 | |
| — | 17.00 | — | — | ||
| Supply of Bimetallic parallel clamp (10/20) | — | — | — | 33,050.38 | |
| — | 2.00 | — | — | ||
| Supply of Outrigger style 01 (ETI/PSI/003) | — | — | — | 2,823.2 | |
| — | 14.00 | — | — | ||
| Supply of bolted type connectors for 160 Sqmm copper jumper RI No. 1009 | — | — | — | 34,391 | |
| — | 14.00 | — | — | ||
| Erection of bolted type connectors for 160 Sqmm copper jumper RI No. 1009 | — | — | — | 8,716.54 | |
| — | 1.00 | — | — | ||
| Supply of Number Plate for Isolators with requisite clamps and nuts and bolts of required size | — | — | — | 328.7 | |
| — | 1.00 | — | — | ||
| Erection of Number Plates for Interrupters and isolators etc with requisite clamps and nuts and bolts of required size | — | — | — | 82.37 | |
| — | 50.00 | — | — | ||
| G.I. Pipe lock with key complete for locking of Isolator as per drawing No. ETI/PSI/HWH-623/2009. [Drawing attached in Explanatory Notes) | — | — | — | 3,756.5 | |
| — | 50.00 | — | — | ||
| "Supply of Contact Wire Parallel clamp (LARGE) RI No. 1031-2 with RDSO Drg .No. ETI/OHE/P/1030-2 REV-D or latest " | — | — | — | 10,966.5 | |
| — | 65.00 | — | — | ||
| Supply of Contact Wire Parallel Groove Clamp RI No. 1031-3 Complete with fasteners as per RDSO Drg. No. ETI/OHE/P/1030-3, Rev-A. RDSO Spec. No. TI/SPC/OHE/Fittings /0130 with A&C slip No. 1 or latest | — | — | — | 14,155.7 | |
| — | 65.00 | — | — | ||
| Supply of Contact Wire Parallel Clamp (Small) RI No.-1041-2, RDSO Spec: TI/SPC/OHE/Fittings/0130 with A&C Slip No.1, Drg. No.: ETI/OHE/P/1040-2 Rev.E or latest | — | — | — | 12,653.55 | |
| — | 70.00 | — | — | ||
| Supply of Parallel clamp (150/160) RI.No.1051-3 and as per RDSO Drg. No. ETI/OHE/P/1050-3 Rev-A or Latest RDSO Spec No. TI_SPC_ OHE_Fittings _0130_with A&C Slip No.1 or latest | — | — | — | 22,796.9 | |
| — | 1.00 | — | — | ||
| — | — | — | 13,28,961.86 | ||
| — | 1.00 | — | — | ||
| — | — | — | 1,00,817.79 | ||
| — | 1.00 | — | — | ||
| Modification / Upgradation, Testing & commissioning in Existing standard SCADA software at RCC Equipments for configuration, integration / hooking up of additional RTUs of adjacant section with master station as per RDSO Spec No. TI/SPC//SCADA/130, Rev. 2 or latest | — | — | — | 75,711.22 | |
| — | — | — | 26,83,212.97 | ||
| — | 85.50 | — | — | ||
| Erection of galvanized steel fabricated masts / other supporting structure | — | — | — | 8,41,487.58 | |
| — | 19.40 | — | — | ||
| Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components | — | — | — | 1,75,816.38 | |
| — | 190.00 | — | — | ||
| Erection of Single bracket assembly | — | — | — | 4,01,164.1 | |
| — | 160.00 | — | — | ||
| Erection of insulators for single bracket assembly | — | — | — | 2,22,528 | |
| — | — | — | 2,48,214.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
2022-CE-I-CT-GCCCorrespondencedated.14.05.2024.pdf
ATTACHMENT
MandatoryAnnexurestobeuploadedwithbid.pdf
ATTACHMENT
GCCACSNo.1.pdf
ATTACHMENT
GCCACSNo.2.pdf
ATTACHMENT
GCCACSNo.3.pdf
ATTACHMENT
GCCACSNo.4.pdf
ATTACHMENT
GCCACSNo.5.pdf
ATTACHMENT
GCCACSNo.6.pdf
ATTACHMENT
GCCACSNo.7.pdf
ATTACHMENT
GCCACSNo.8.pdf
ATTACHMENT
GCCACSNo.9.pdf
ATTACHMENT
GCCACSNo.10.pdf
ATTACHMENT
Tenderdocument729-TRD_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .