REPAIR/REPLACEMENT TO FLOORING TILES, PGI SHEET, PLASTERING AND OTHER MISC B/R WORK OF OFFICE, STORE AND TOILETS OF GE UTILITY PLANT AND MACHINERY DELHI CANTT-10

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed by Engr-in-Charge.

Supply and fixing of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet not less than 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per direction complete all as specified and as directed. (Make:- Tata Blue Scope/ Indian Ispat/JSW)

Supply and fixing of Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge. (Make:- Tata Blue Scope/ Indian Ispat/JSW)

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fixing of Rolled section as in main and cross beams, hips and jack rafters, purline where connected to common rafters and running rails and guids for sliding doors fixed with angle cleats or other plates, conforming to Fe 290 grade E-165 complete all as specified and directed.

Supply and fixing of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

Materials and labour for 15mm thick screed bed or bedding layers in cement mortar (1:4) for laying of floor topping layer tiles complete all as specified and as directed.

Materials and labour for Non Skid ceramic tiles, first quality, coloured (as approved by GE) 7mm to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18sqm, laid on floor, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade / colour/ matrix of tiles complete all as specified and as directed.(Make:- SOMANY / JOHNSON / KAJARIA / ASIAN/ NITCO.)

Materials and labour for vitrified ceramic tiles, first quality, light shade (as approved by GE) 10mm thick (square/ rectangular) area of each tiles exceeding 0.36sqm but not exceeding 0.42Sqm, laid on floor, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade / colour/ matrix of tiles complete all as specified and as directed. .(Make:- SOMANY / JOHNSON / KAJARIA / ASIAN/ NITCO.)

Materials and labour for glazed ceramic tiles, first quality, coloured (as approved by GE) of size 300mm x 200mm x 7mm (min) thick as in dado/ skirting/wall set & jointed in neat cement slurry and pointed in white cement with pigment to match the shade/ colour/ matrix of tiles complete all as specified and as directed. .(Make:- SOMANY / JOHNSON / KAJARIA / ASIAN/ NITCO.)

Materials and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including dismantaling old unserviceable one complete all as specified and as directed.

Materials and labour for machine cut kota stone slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in riser of steps, skirting, dado and wall including dismantaling old unserviceable one complete all as specified and as directed.

Materials and labour for colored chequered cement concrete tiles of size 300 x 300 x 25 mm thick with grey cement and pigment laid over and including 20mm thick cement screed bed in cemen t mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor including dismantling of old tiles incl cement mortar bedding (but not the backing) and removing rubbish off the premises complete all as specified and directed..(Make:- NTC/ NITCO/ EUROCON/ DURACRETE)

M&L for minimum 60mm thick precast PCC interlocking blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in equal proportion of grey and coloured tile to make a pattern as directed, laid over and with 20-25mm thick sand cusion including dismantling of old precast PCC interlocking blocks complete all as specified and directed by Engineer-in-Charge.

S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified.(Make:- Everest/ Universal/ Godrej)

Demolition of brick work set in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Materials and labour for brick work with well burnt bricks, locally available best quality (Sub class 'B') bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Taking down old damaged cement plaster of any description including racking out joints hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15 mm thick in Cement Mortar (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar 1:4 on concrete/Brick surfaces, chajja or projections finished even and smooth without using extra cement complete all as specified and directed.

Materials and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. (Make:- JHONSON & NICHOLSON/ SNOWCEM PLUS/ BERGER / ASIAN PAINT)

Materials and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed. (Make:- JHONSON & NICHOLSON/ SNOWCEM PLUS/ BERGER / ASIAN PAINT)

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) not exceeding 1.5Sqm each complete all as specified and as directed.

Supply and fixing of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. (Make:- M/s SK Steel Febricators, Ludhiana/ M/s Sehgal Doors, New Delhi/ M/s Bhawani Steel Febrcation Gaziabad/ M/s India Mart Intermesh Ltd/ Hyat Interriors)

Materials and labour for PCC 1:3:6 type C-1 with 20mm graded stone aggregate for filling of pressed steel door frame complete all as specified and as directed.

Supply and fixing of 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

Supply and fixing factory made 35 mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, (with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, 2009, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supplying and fixing in repairs clean sawn second class hard wood battens for wall panelling work having sectional area of exc 15 sqcm and not exc 25 sqcm, fixed to walls at 60cm center to center complete all as specified and as directed.

Material and Labour for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as per specification of SSR 2009, Part-I including taking down old unserviceable one complete all as specified and as directed.(Make:- SINTEX/ RAJSHRI PLASTIWOOD/ DuURA PLAST/ FENESTA)

Material and Labour for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to walls to make PVC frame as per specification of SSR 2009, Part-I including taking down old unserviceable one complete all as specified and as directed.. (Make:- SINTEX/ RAJSHRI PLASTIWOOD/ DuURA PLAST/ FENESTA)

Material and Labour for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions , laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board with cover fillets etc complete all as specified and directed. (Make of Board:- Lafarge Boral/ Gyproc/Amstrong/Daiken/Lioyds)

Material and Labour for forming contraction joints 65mm deep x 10 mm wide filled with sealing compound Grade A including taking down old unserviceable one complete all as specified and directed.

Taking down PVC chowkats or frame with shutters (without taking off shutters from the frame) not exceeding 1.5Sqm each complete all as specified and as directed.

Supplying and fixing of solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specifications and drawing shown on Srl page No. 178 of SSR Part-II, 2020 complete all as specified and as directed. (Make:- SINTEX/ RAJSHRI PLASTIWOOD/ DuURA PLAST/ FENESTA)

Supplying and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing shown on Srl page No. 179 of SSR Part-II, 2020 complete all as specified and as directed.(Make:- SINTEX/ RAJSHRI PLASTIWOOD/ DuURA PLAST/ FENESTA)

Taking down carefully steel window/ventilators including shutter, grill and glass panes of any size and making good to the damaged/ disturbed surfaces while cutting holes complete all as specified and as directed.

Supplying and fixing of steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supplying and fixing of steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete but with out glazing bars, dovetailed or welded complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supplying and fixing of 5.5mm thick sheet glass, ordinary quality and glazing to aluminium doors in square exceeding 0.5sqm in each pane complete all as specified and as directed. (Make:- MODIGUARD FLOAT/ SAINT GOBAIN/ TRIVENI FLOAT)

Supplying and fixing of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 including dismantling old one complete all as specified and directed.

Supplying and fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and wooden beads upto four storied of building complete all as specified and as directed.

Supplying and fixing in repairs of 4m thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed. (Make:- MODIGUARD FLOAT/ SAINT GOBAIN/ TRIVENI FLOAT)

Supply and fixing stainless steel butt hinges, medium weight of size 100mm complete all as specified and as directed.

Supplying and fixing aluminium anodised barrel tower bolts, extruded section of size 150 mm having dia of shoot/ bolt not less than 10mm complete all as specified and as directed. (Make:- ARGENT/ CLASSIC/ BHARAT/ ALANS/ HATTICH)

Supplying and fixing extruded aluminium alloy anodised handles, fabricated type of size 125 mm complete all as specified. (Make:- ARGENT/ CLASSIC/ BHARAT/ ALANS/ HATTICH)

Supplying and fixing 300 mm long, aluminium anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. (Make:- ARGENT/ CLASSIC/ BHARAT/ ALANS/ HATTICH)

Supplying and fixing in repairs 15mm bore dia, cast copper alloy with crutch or butterfly handle chromium plated bib tap, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed. (Make:- Jaguar/ GEM/ MARC/Parryware)

Supplying and fixing in repairs stop valve (Angular type) 15mm bore dia, fancy type chromium plated, screwed both ends for iron pipe or for unions complete all as specified and as directed. (Make:- Jaguar/ GEM/ MARC/Parryware)

Supplying and fixing in repairs PTMT 32mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks complete all as specified and directed.(Make:- Prayag/ Polytuff)

Supplying and fixing in repairs for 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified. (Make:- Prayag/ Polytuff)

Supplying and fixing in repairs for 450mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specified. (Make:- Jaguar/ GEM/ MARC/Parryware)

Supplying and fixing in repairs 15mm CP brass health faucet (hand shower), inlet length100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc all as directed.(Make:- Jaguar/ GEM/ MARC/Parryware)

Supplying and fixing in repairs 40mm bore dia PTMT connection pipe of length 450mm including PVC washer on both side complete all as specified and as directed. (Make:- Prayag/ Polytuff)

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), coloured (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or out going pipe) complete all as specified and as directed.(Make:- Hindusthan Sanitary Wares/ Jaguar/ Cera/ Parryware)

Supplying and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed. (Make:- Hindusthan Sanitary Wares/ Commander/ Cera/ Parryware)

Supplying and fixing in repairs vitreous china wash hand basin, flat back of size 550mm x 400mm coloured including cutting for and pinning in ends of brackets or erecting stand including flexible PVC waste pipe of 32mm dia and minimum 0.60Rm length and PVC waste coupling, GI bracket duly painted with aluminium paint and other fixing accessories complete all as specified and as directed. (Make:- Hindusthan Sanitary Wares/ Jaguar/ Cera/ Parryware)

Supplying and fixing in repairs 15mm bore dia, brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make:- Jaguar/ GEM/ MARC/Parryware)

Supplying and fixing in repairs 75mm outlet diameter cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Materials and labour for preparation of new steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed. {Make:- ASIAN/ BERGER / JHONSON & NICHOLSON / SHALIMAR}

Materials and labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed. {Make:- ASIAN/ BERGER / JHONSON & NICHOLSON / SHALIMAR}

Demolition of cement concrete in ground floor and paving not exe 15 cm thick (below or above ground level) and including removing of demolished material from site complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:2:4 type B2 (40mm graded stone aggregates) as foot path, hard standing, etc. of floor complete all as specified and as directed.

Material and labour for 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregates) as in finishing concrete surfaces even and smooth (without using extra cement) of floor complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 (using 40mm graded crush stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

garnet engineers contractors

J D ENTERPRISES

Tushar engineers

SHIVA ENTERPRISES

HIND CONSTRUCTIONS