REPAIR AND PAINTING TO ROAD SIDE WALL TUNNEL WALL, RAILINGS AND REPAIRS TO FOOTPATHS, INTERLOCKING TILES, PARAPET BALUSTERS, TREE GUARD TILES, ELECTRIC POLE BASE TILING, KERB STONES, INTERLOCKING AND CHEQUERED TILES AND MISC WORKS INSIDE FORT WILLI

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MOD land and disposed off complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

Taking out old interlocking paver bock, of any description, thickness or situation and keeping aside neatly stacked for reuse or removal from site complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC), any section, embedded in natural ground, including taking out embedded portion and making good disturbed ground, complete all as directed.

Dismantling posts or struts (wood, steel or RCC), any section, embedded in concrete, brick work, masonry etc., including taking out embedded portion and making good disturbed ground, complete all as directed.

Dismantling of old chain link wire mesh fencing including flat iron, ms round supporing bars, bracing bar etc complete all as specified and directed.

Excavating in post hole (or similar hole) each n exc 0.5 cum getting out, returing, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) in Foundation, filling and mass concrete complete all as specified and as directed.

M&L PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) in Foundation, filling and mass concrete complete all as specified and as directed.

S&F in repair 35 mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement mortar 1:4 including dismantling of existing jalli complete all as specified and as directed.

M&L brick work with sub class'B' fly-ash bricks, straight or curved on plan exc 6m radius buit in cement mortar 1:6 complete all as a specified and as directed.

-ditto- but using serviceable bricks obtained from demolition of bricks

M&L for brick work with fly ash brick straight or cuved on plan to any radius in half bricks thick walls, built in 1:4 cement mortar complete all as directed.

M&L Mild steel framed work such as grills of ornamental type, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.

S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

-ditto- but granite slab in vertical surfaces over and including 10 mm thick screed bed in cement mortar 1:3

M&L for 75mm thick PCC (1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in floor, plinth protection etc, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on brick or concrete walls in cement mortar 1:6 finished evean smooth without using extra cement complete all as a specified and as directed

M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 , finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed

M&L for 20 mm thick plastering in two layers, 10 mm each in cement mortar 1:4 with water proofing compound as per manufacturer's instructions, on brick/stone walls or concrete surfaces finished even and fair ( upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".

Supply only integral water proofing Compound, conforming to IS and as approved, complete all as specified.

M&L for Cement Concrete type B-1, (1:2:4) using 20mm graded crushed stone aggregate in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including use and waste formwork (straight or curved) complete all as specified and as directed.

S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

-ditto- but 6 to 8 mm dia TMT bars

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

M&L for RCC 1:1½:3, type A1 (nominal mix) type A1 using 20 mm graded stone aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for fair finished surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls, providing 1.5 mm thick wall putty for smooth finish and applying two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceilings, providing 1.5 mm thick wall putty for smooth finish and applying two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.

M&L Preparing old decorated surfaces of Walls and applying one coat of acrylic distemper, finished with rollers over a coat of chalk whiting complete all as specified and as directed.

M&L applying one coat of acrylic distemper on ceiling, finished with rollers incl preparation of old decorated surfaces over a coat of chalk whiting complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint over a coat of suitable primer to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

M&L for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.

M&L for preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

S&F in repair Cast iron work grade FG 150, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles (weight n exc 5 kg each) complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint with brush over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of cement base paint with brush complete all as specified and directed.

M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L Preparing new Surfaces of ceilings and applying Three coats of white wash complete all as specified and as directed.

M&L Preparing new Surfaces of walls and applying Three coats of white wash complete all as specified and as directed.

M&L Preparing new Surfaces of walls and applying Three coats of white wash complete all as specified and as directed.

M&L for applying one coat of white wash to old decorated surfaces of ceilings including preparation of surfaces complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M&L for providing 100 mm thick Plain Cement Concrete (1:2:4) type B2 using 40mm graded stone aggregate as in floors, path, hardstanding etc, laid in alternate bays, surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300 x10mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete, laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE : JOHNSON, Model : Endura or equivalent item in other makes listed in the tender)

M&L for pre-polished Chequered cement concrete tiles (coloured) of size 30cm X 30cm X 25mm thick, set, jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement &pigment to match the surface laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

S&F in repairs pre-cast reinforced cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) for decorative ornamental railing/parapet post of size 150 mm X 150 mm at base and top and 100 mm dia at mid section, of height 630 mm, set in cement mortar 1:4 complete all as specified and directed. (Note : Reinforcement to be measured and paid separately).

M&L for designer cement concrete tiles of size 150 mm X 75 mm X 18-20 mm thick (with rainbow polymer based continuous tiles) as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for designer cement concrete tiles of size 227 mm X 75 mm X 8-10 mm thick as in vertical surfaces such as skirting, dado, laid over and including 10 mm thick screed bed in cement mortar 1:3, set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for designer cement concrete tiles, 22-25 mm thick, any size as directed, as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shde of tiles, laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE: Anjali, Model: Enigma/Remi or equivalent model in other approved makes specified in tender)

M&L for Mild steel hand rails, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) including necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as specied and directed. (NOTE: MS bolt with nut & washer shall be measured and paid seperately)

Fixing only mild steel fencing posts and struts including cutting top to shape as directed, drilling holes, notching for wire etc, flat iron fillets incl all necessary drilling, bolting or riveting complete all as specified and directed. (NOTE: MS bolt with nut & washer shall be measured and paid seperately)

S&F 3 mm dia PVC coated galvanised mild steel chain link fencing of mesh size 75 x 75 mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and as directed. (NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

M&L for 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape required, complete all as specified and as directed

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long, diameter 5 to 10 mm complete all as specified and directed.

S&F in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., incl dismantling of existing barbed wires complete all as specified and directed. (Note: - Each line of wire will be measured)

M&L for laying pre-polished 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern complete all as specified and directed. (NOTE: Sand for cushioning level will be measured and paid seperately)

M&L Sand filling under floors under paver block, thickness not exc 50 mm including consolidation complete all as specified and as directed

Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain, washing of the drain with water and removing the same to a distance outside MOD complete all as directed by the Engineer-in-Charge.

M&L for cleaning of inaccesible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required and repair to broken/chipped off plastered surfaces with cement mortar 1:4, mixed with water proofing compound @ 200 ml per 50 kg bag of cement, finished fair and even including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)

M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with water proofing compound (as per manufacturers instructions) and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid seperately)

M&L for preparing bituminous surfaces of road or pavements and marking 2.0mm thick centre lines, stop lines, dashes, arrows, letters, zebra crossing etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with 20% glass beads (intermixed), spread and laid with special applicator machine all as per manufacturers instruction complete all as specified and directed.

RAJ ENTERPRISE

MS AP CONSTRUTION AND CO

ARJUN DAS VALECHA

dutta and dutta

UNIVERSAL TRADING CENTRE

M A ENTERPRISES

DEB AND COMPANY