Solar Pump Set With Construction of TubewelI Krishna kund

Construction of Water Pond at Krishnakund

Excavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of usefulmaterial if available : Ordinary Rock

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : M-10 grade Nominal Mix (1:3:6 ) ( with graded stone aggregate 20mm nomial size )

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size )

Random rubble dry stone Kharanja under floor.

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Raised and cut pointing

Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc complete fine finish : 20 mm thick

Finishing with neat cement ( punning )

Solar Pannel & Construction of Tube Well at Krishnakund

Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe. Nominal bore 150 mm dia.