Widening and Strengthening work at Dadri Jarcha Road to Veerpura Khandera Kot ka Pul and Ajaipur Crossing Road Under RSN 5054 in Distt gautambudhnagar

Amount

Construction of embankment with approved material obtained from borrow pits with with all lift and lead transporting to site upto 3 Km , spreading, gradingto required slop and compacting to meet requiredment of table 300-2 as directed by the Engineer incharge.( including royality and labour cess). Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road. Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202(a) Bituminous Courses. Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (By Mix in Place method). Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the material with at OMC in machenical mix plant carriage of mix material by tipper to site laying in uniform layers of each 100mm thick with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per MORTH. Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Providing and applying Primer coat with bitumen emulsion SS-1 using emulsion pressure distributor at the rate of 0.70 kg/sqm on the prepared bitumninous/granular surface cleaned with mechanical broom. Including cost of all material, labour, T &P, cost of Bitumen, including all taxes, royalty, labour cess complete. as per MORTH specification. Excluding GST as per E/I.

Providing and applying Tack coat with bitumen VG-10 medium setting using bitumen pressure distributor at the rate of 0.25 kg/sqm on the prepared bitumninous/granular surface cleaned with mechanical broom. Including cost of all material, labour, T &P, cost of Bitumen, including all taxes, royalty, labour cess complete. as per MORTH specification. Excluding GST as per E/I.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous (VG-30) binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Providing and applying Tack coat with bitumen VG-10 medium setting using bitumen pressure distributor at the rate of 0.20 kg/sqm on the prepared bitumninous/granular surface cleaned with mechanical broom. including cost of all material, labour, T &P, cost of Bitumen, including all taxes, royalty, labour cess complete. as per MORTH specification. Excluding GST as per E/I.

Providing & laying bitumen concrete with higher capacity patch type HMP using crushed aggregate of specified grading premixed with bitumenious (VG-30) binder @ 5.4 % of mix and filler, transported the hot mix to work site.As per MoRT&H Specification 509 grading II Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. Including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I.

Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501 SI no.20.15(b) Including cost of all material, labour, T&P etc., labour cess, royalty and all taxes complete but excluding GST.

Supply and laying of 1000mm dia NP-3 Hume pipe including cost of labour T&P etc complete inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 6:3:1 including all taxes, material, T&P, Machinery, royalty, labour cess complete. Excluding GST as per E/I .SI.No. 279

RCC Grade M 20 using batching plant transit mixer & manual placing RCC work in Grade M 20 in Foundation & Sub Structure with cement approved coarse sand & two cm gauge well graded grit including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work. As per Case II MORTH specification 1500, 1700 & 2100. SN.12.80 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications of MORTH as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

First class brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work. SI.No. 303a Excluding GST as per E/I

12 mm thick plaster with cement and Coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. Excluding GST as per E/I SI.No. 584 New Item

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres. Excluding GST as per E/I As per Clause 202

M/S DIMANIYA BUILDERS

Jeet Construction

Raja contractors & engineers

Iqbal construction company

M/S VIJAY KUMAR