SPL REPAIR TO CERTAIN ROAD AND PROVN OF COVERED SHED FOR REPAIR BAY WITH STONE SET FLOORING AND COMPLETE WIRING FOR A VEH OF 74 ARMD WKSP AT ZONE-8 AT BABINA CANTT

Amount

Scarifying or picking gravelled macadam or bituminous macadam exc 50mm and n exc 100 mm deep in area not exc 400 Sqm complete all as specified and directed

M&L,7.5cm thick (compacted thickness) WBM with coarse aggregate of limestone,sand stone grading 2 (63 to 40mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed.

All as per Ser item No 2 but expect material. (Material obtained from Ser No 01 shall be used)

M&L, preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L, applying evenly a tack coat of bitumnous primer at 10 Kg per 10 Sqm and M&L for providing bituminious premix asphaltic semi dense concrete (40mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.

M&L for preparing old black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat @ 5 kg per 10 sq m with using paving bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.

M&L for premix bituminous macadam laid / rolled and compacted to required gradient and hcamber and (consolidated thickness 75mm or less) using 4% paving bitumen by weight or total mix complete all as specified and directed

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot allied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S&F for solar delineator size 1000x47mm is made of polycarbonate and toughened aluminium alloy body and height 145mm, dia 80mm comprises of 4 super bright LEDs which give 360 degree viewing incl solar panel 2.5V, 120mm (approx) 1.25V rechargeable battery - 1 No incl surface dressing and PCC 1:2:4 using 12.5mm graded aggregate complete all as specified and directed.

S&F sand stone patties in edging of rough squared stones of size 50mm thick, 300mm depth and 60cm long each pattie, length of stone patti shall be laid parallel to the road length, jointed struck flush including necessary excavation, earthwork, returning filling and removal complete all as specified and directed.

M&L moorum/red bajri for berms including spreading, levelling, watering and rolled with power roller of 5 to 8 tonne capacity to required camber and gradient complete all as specified and directed.

S&F road safety poly carbonate convex mirror 100cm dia encased in ABS materials, orange colour for outdoor installation including 3.0 long and 75 mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangement (stand painting with two coats of synthetic enamel paint over one coat of red oxide primer fixed on ground in PCC block of size 45cmx45cmx50cm of PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) and including necessary excavation earth work and removal of soil to a distance n.exc.50m complete all as specified and directed.

S&F for PVC road Speed Breaker rectangular type size 350x250x50mm complete all as specified and as directed

S&F for PVC road Speed Breaker rectangular type size 350x250x50mm complete all as specified and as directed

Suface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Excavating over areas, n exc 1.5m deep and getting out in any type of soil including Returning filling and Removing excavated soil complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for fdn etc in any type of soil including Returning filling and Removing excavated complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, levelled and rammed including watering complete all as specified and directed

M&L,100mm thick soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required camber and gradient complete all as specified and as directed.

M&L,150mm thick (compacted thickness) WBM in two layers, each 75 mm thick with stone coarse aggregate of grading 2 (63 to 40mm) spread, rolled and consolidated to gradient material and camber required complete all as specified and as directed.

M&L cement concrete work in pavement / hard- standing of flexual strength 40kg/per square centimetre in field using 400kg of cement per cubic metre, thickness of concrete 20cm or less including form work complete all as specified and directed.

M&L stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide the 150mm deep and sides dressed; bedded in cement mortar 1:3, 20mm thick; joints grouted in cement mortar 1:2 with an admixture of metallic floor hardner, 5% by weight of cement and struck flush complete all as specified and directed.

S&F kerb of roughly squared stones/ edge stone to flooring with granite stone setts of size 25cm x 30cm long, 150 to 200mm wide and 500mm deep, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush complete all as specified and directed.

Excavation in post holes in any type of soil n exc 0.50 cum each, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm gdd stone aggregate as in foundation filling and mass concrete complete all as specified and directed

S&F structural steel (framed/unframed) purlins, rafter,trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of gde Fe 410-S complete all as specified and directed.

S&F wind ties for roof including securing bolts etc complete all as specified and directed.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L, for Walling of random rubble, brougt up to course, Well bonded, bedded and solidily hearted, buil in CM1:6 complete all as specified and directed.

M&L for brick work with FLY ASH BRICKS , old size , straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces , surface finished smooth and even without using extra cement etc complete all as specified and as directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed.

M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed.

One light point controlled by one switch

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 37 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 10.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S & F Regid non-metallic PVC conduit not less than 20 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, complete all as specified and directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series, with copper lugs complete all as specified and directed.

S&F in replacement Switch disconnector fuse (panel mounted cubical type),Three pole & Neutral ,50 HZ ,415V,200 A conforming to IS/IEC 60947-part 1&3 with sheet metal Enclosure complete all as specified and directed. Make:Havells Cat Part NO:IHKFTW4063 or equivalent in L&T,Schenider,C&S,ABB

S&F 70 W LED 6000/6500K exclusive innovative designed, long life versatile pressure dia-cast aluminium IP 65 flood light luminaire with high power LED as light source. incl wiring upto and terminating into existing ceiling rose complete all as specified and directed.

S&F LED security/ street light fitting 1 X35 W LED 5700K energy saving & environmental freindly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 65 protection and impact resistance of IK 07 luminaire with high power LEDs as light source and electronic driver suitable for pole dia 40 mm including 45 mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and directed.

Supply and fix Air circulating wall mounted fan having 600 mm sweep,240 V,50 Hz Adjustable speed control ,manual ,corded with 3 Nos of blade complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 35 X 3.5 sqmm complete all as specified and directed.

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed.

Returning fitting in soft/loose soil, including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated soils to a distance n.exc. 50 mtrs and depsiting where directed at a level n.exc. 1.5 above the starting point complete all as specified and directed.

Supply laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

Supply and laying of sub class B old size bricks, laid flat i.e length of bricks shall be laid across the length of cable for protection of UG cable complete all as specified and directed.

M&L pipe galvanised iron, light grade ISI marked, complete with fittings laid inj trenches/ fixed with poles etc as protection to cables complete as directed for the size 50 mm dia complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. Note:- (i) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S Ritu Tandon