Tender ID

Karnataka

Retender

Works

Buildings

Construction and repairs of school building in shri s.b .horatti school at yadahalli village of mudhol taluk of bagalkote district

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Karnataka

Amount: ₹1.2 CrCloses: 8 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published22 Oct 2024
Closed8 Nov 2024
Retendered22 Oct 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 22 Oct 2024

Tender Value

₹1.2 Cr

EMD Value

₹1.6 L

Closing Date

8 Nov 2024, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRED BAGALKOTE

Office Number

Mobile Number

Work Description

Construction and repairs of school building in shri s.b .horatti school at yadahalli village of mudhol taluk of bagalkote district

Tender Information

Tender ID

RDPR/2024-25/BD/WORK_INDENT9486

Reference Number

RDPR/2024-25/BD/WORK_INDENT9486

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredValid CLASS-1 PRED/KPWD Registration copy

RequiredLast 5 years Audit Report with UDIN No

RequiredSimilar Nature Work done certificate with eproc Indent No

RequiredItemwise workdone certificate

RequiredBid capacity Calculation sheet

RequiredUnconditional Line of credit from Nationalized Bank

RequiredOngoing commitments with self attestation

RequiredAll other documents as per KW 4 Bid Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer should quote his rates With all leads and lifts loading and un loading, including cost of Labour, hire charges of Machinery and other incidental charges etc complete as per the directions of the engineer incharge of the work specifications.

Defect liability period of 1 year and 1 year for major repairs to be considered.(Maintenance date starts from the date of completion period.) All the items included in the estimate are inclusive of lead and lift charges.

The work will be inspected by the third party & the bill will be admitted only after the satisfactory quality report from third party.

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc.

Contractor should made an agreement within 20 days from the date of LOA. work should be commence within 2 weeks time from the date of work order. If not tender will be cancelled at the contractors own risk and cost.

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

The Information on litigation in which the tender is involved are to be furnished

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive)

The Employer reserves the right to reject any or all Tenders without assigning any reason.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 Qualification of the Tenderer in Section 2 Instructions to Tenderers will only be considered for evaluation

The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts

Bidders are advised to note that, 18% GST will be added to the contract amount.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

The bidder should mention the UDIN No on the turnover certificate failing which bid is rejected

If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause.

Financial turnover of previous years shall be given a weight of 10per per year to bring them to the price level of the 2023 24 in the Technical Qualification Criteria mentioned in the next section

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

List of existing commitments and ongoing works

Corrigendum modifications correction, if any, will be published in the website only,

Defect liability period will be TWO year

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 a. Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Amount Put Tender (Turn over With compulsory UDIN Number) UDIN No. otherwise bid will be directly disqualified

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 b. Satisfactorily completed, as prime contractor, at least one similar work/Building work of value not less than 50% of the amount put tender (Workdone with indent No)

Tenderer must have liquid assets and/or availability of credit facilities of not less than Rs.34.60 Lakhs Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC as per bid document)

All other conditions and requirements has to be fulfilled as per the standard bid document and attached General conditions

Work completion period will be 9months

The Project Completion period is 9 months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims shoulbe considered).

The Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 2 years maintenance

The Eligible Contractor Should Agree the KW-3&4 Bid Document Conditions.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED BAGALKOTE within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

Materials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor.

Participating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW-3 & 4.

If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, BAGALKOTE. (Not in inward).

The contractor should provide daily there staff members on site.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Past Experience

PAN & GST Certificate

GST Registration

Contractor should upload contract registration copy enrolled in KPWD/PRED-Class 1/above registration copy

PWD Registration Certificate (Class I/II/III/IV)

To qualify for award of this contract, each Tenderer in his name should have in the last five years 2019-20, 2020-21, 2021-22 2022-23 and 2023-24 Satisfactorily completed, satisfactory completion as prime contractor, for at least one similar work such as Similer nature/ Construction of Building work of value not less than Rs.51.90 Lakhs, Certificate to this, from a competent authority not below the rank of Executive Engineer should be enclosed. The work done certificate should mention the details of work executed and the date of commencement & date of completion of the work. (Work done with indent No

Work Done Certificate

Tenderer must have completed physical work done as prescribed in bid document KW-4 Executed in any year the following 80 Percentage quantities of work during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ 1.Earthwork 362.76 Cum 2.PCC RCC 174.432 Cum 3.TMT Steel 12.752 Tonne 4.UCR 29.616 Cum 5.BBM 134.12 cum 6.Plastering 1773.48 Sqm 7.Flooring 927.28 Sqm

Work Done Certificate

To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e.2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. 207.60 Lakhs. with UDIN No. certified by Authorized charted Accountant-turnover shall not be less than two times of amount put to tender

Audited CA Certificate of Annual Turnover

Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.34.60 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. LOC issued by such a banks should be of UNCONDITIONAL

Line of Credit

Assessed available tender capacity (A x N x1.5-B) where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to ------- price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next.......years (period of completion of the works for which Tenders are invited) Note- a)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- BID CAPACITY

Postal Address with contact number

Others -- ADDRESSPROFF

Work Locations

Fee & Financial Details

Tender Fee Amount

₹3,070

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

22 Oct 2024

Published

22 Oct 2024

Bid Opening

12 Nov 2024

Download Ends

7 Nov 2024

Pre-Bid Meeting

5 Nov 2024

BOQ Preview

•

GROUND FLOOR BUILDING Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, b...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming an...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Form Work 8% For Columns Footing

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Form Work 70% For Columns

•

Form Work 50% For Plinth Beam

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Form Work 70 % For Columns

•

Form Work 70 % For Lintel and Roof Beam

•

Form Work 70% For Slab

•

Form Work 70 %For Chajjas

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 m...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Providing and fixing hold fasts PWD CSR 2023-24 / VOLUME 2 / P. NO 218 / Materail Componet SI NO: 444

•

Providing and fixing Nails and screws PWD CSR 2023-24 / VOLUME 2 / P. NO A-28 / Materail Componet SI NO: 548

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm with all lead and lift complete. as per the directions of the Engi...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 200mm with all lead and lift complete. as per the directions of...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mmm with all lead and lift complete. as per the directions of ...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS hinges 125 mm with all lead and lift complete. as per the directions of the Engi...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm with all lead and lift complete. as per the directions of the...

•

Providing fixing of 2-track x 2-panelsliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections andwith minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as specif...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and f...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and ...

•

Providing and fixing 12 m thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS:3087 marked, in ceiling with necessary nails etc.complete.with all lead and lif...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 l/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly cl...

•

FIRST FLOOR BUILDING Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m he...

•

FormWork 70% For Columns

•

FormWork 60% For Roof Beam

•

Form Work 50% For For Slab

•

Form Work 45% For Chejja

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and fixing hold fasts PWD CSR 2023-24 / VOLUME 2 / P. NO 218 / Materail Componet SI NO: 444

•

Providing and fixing Nails and screws PWD CSR 2023-24 / VOLUME 2 / P. NO A-28 / Materail Componet SI NO: 548

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 200mm PWD CSR 2023-24 / VOLUME 2 / P. NO 25 / I NO: 22.15.3

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mmm PWD CSR 2023-24 / VOLUME 2 / P. NO 26 / I NO: 22.15.7

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS hinges 125 mm PWD CSR 2023-24 / VOLUME 2 / P. NO 26 / I NO: 22.15.8

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm PWD CSR 2023-24 / VOLUME 2 / P. NO 26 / I NO: 22.15.10

•

Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Providing and Supplying PVC pipes of 4 Kg/cm2 for 110mm (1.315) with all lead and lift complete. as per the directions of the Engineer-in-charge of the work. PWD CSR 2023-24 Vol -5 P.No- A-44 SI....

•

Electrification

•

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The condui...

•

Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plas...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box (Page No 03 INo 1.5.2 )

•

Supplying And Fixing Metal Fan Box with Round Hook.(Page No 04 INo 1.13 )

•

Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5mm2 (Phase and Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to ...

•

Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5mm2 (Phase & Neutral) and 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to ...

•

Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine N...

•

Supplying and fixing surfaceflush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF...

•

Supplying and fixing surfaceflush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module (Page No 09 INo 3.6.4 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129332A DP Switch(Page No 09 INo 3.6.9 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936/16A Universal Socket (Page No 09 INo 3.6.10 )

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.(Page No 09 INo 3.8 )

•

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws. 80 /90mm (Page No 09 INo 3.10.2 )

•

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws 110 mm (Page No 09 INo 3.10.3 )

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A SP Switch (Page No 10 INo 3.14.10 )

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.32-40 A 4 pole (Page No 18 INo5.20.8 )

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0...

•

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and unserviceable materia...

•

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Supplying of recesss mounting non integrated type LED down light W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceilling clamps LED of power COB with CC...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

LOC DETAILS.jpeg

Tender Document • 0.07 MB

9486 KW 4.docx

Tender Document • 0.13 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction and repairs of school building in shri s.b .horatti school at yadahalli village of mudhol taluk of bagalkote district

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Karnataka

Amount: ₹1.2 CrCloses: 8 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published22 Oct 2024
Closed8 Nov 2024
Retendered22 Oct 2024