Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 CrAccepted-AOC C 61 A MANGAL ELECTRICAL INDUSTRIES PRIVATE LIMITED ROAD NO 1 C VKI AREA JAIPUR RAJASTHAN 302013 UDYAM RJ 17 0065203 08AAFCM4722P1Z1 R M MII STATUS AS VERIFIED | JAIPUR | RAJASTHAN | 302013 | ₹44.6 Cr | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹45.5 CrRejected-Finance | ₹45.5 Cr | L2 | Rejected-Finance L2 bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically not qualified |
Tender Value
₹43.7 Cr
EMD Value
₹87.4 L
Closing Date
27 Jan 2025, 4:00 pmClosed
SUPERINTENDING ENGINEER (Contracts-II), RVPN,Jaipu
OFFICE OF THE SUPERINTENDING ENGINEER (Contracts-II) (MM Building of RVPN, Old Power House Premises, Near Ram Mandir, Bani Park, Jaipur.)
CONSTRUCTION OF 220/132 KV, 1X160 MVA GSS AT DALOT (UPG.) (DISTT.- PRATAPGARH) ALONGWITH 220KV BAYS WORK AT 220KV GSS PRATAPGARH UNDER BID ENQUIRY NO.RVPN/ KfW /NCB-9/BN-9019002408
2024_RRVPN_439124_1
RVPN/ KfW /NCB-9/BN-9019002408
Open Tender
Electrical Works
540 days
Jaipur
Please refer Tender documents.
35 documents required · 35 mandatory
₹17,700
As per Bid Specification
₹87.4 L
Jaipur
18 Jul 2025
20 Dec 2024
27 Jan 2025
20 Dec 2024
27 Jan 2025
16 Jan 2025
3 Jan 2025
Amount
MAIN MATERIAL/ ITEMS
Auto Transformer:
220/132 kV, 160 MVA Auto Transformer with all accessories (excluding transformer Oil) as per technical specification
Insulating Oil for 160 MVA 220/132 kV Auto Transformer as per S-I , (1) above
Digital RTCC Panel consisting of Digital RTCC relay as per technical Specification for transformers at S-I (1) above
Circuit Breakers
220 kV Circuit Breakers
220kV circuit breakers (3 Ph.) Along with support Structure
132 kV Circuit Breakers
132 kV circuit breakers (3 Ph.) Along with support Structure
Instrument Transformers
Capacitor Voltage Transformer
Single-Phase, 220 kV, 4400 pf CVT
Current Transformer (1-Phase)
C&R Panels & SAS system (Complete in all respect, refer Section-V A, B, Part-III, Volume-II)
New Substation
Control Panel for 220 kV Transformer (220 kV Side) Type: SAS-THCB
Relay Panel for 220 kV Transformer (for both HV & MV) Type: SAS-THRB
Control Panel for 220 kV Feeder Type: SAS-FCB
Relay Panel for 220 kV Feeder Type: SAS-FRB
Control Panel for 220 kV Bus Coupler Type: SAS-BCCB
Relay Panel for 220 kV Bus Coupler Type: SAS-BCRB
220 kV Busbar Protection Relay Panel Type: SAS-BBRB
Control Panel for 220 kV Transformer (132 kV Side) Type: SAS-TLCB
Relay Panel for 220 kV Transformer (132 kV Side) Type: SAS-TLRB
Station HMI [Industrial grade Computer with 21"TFT monitor as per specification requirements]
Station HMI (Hot Standby)[Industrial grade Computer with 21"TFT monitor as per specification requirements]
HMI View Node[Industrial grad Computer with 21"TFT monitor as per specification requirements]
A3 Size B&W Laser Printer
Substation Automation System Network Panel Type SAS-NW
Modems (both sending and Receiving End) for communication to RCC & Sub SLDC for PLCC]
Data Concentrator Unit (DCU) at Substation for RAS mounted in suitable enclosure & fully wired
Software: Application as well as System Software as per specification requirements for various hardware elements for meeting of functional requirement of the specification.
Substation Auxiliary Monitoring Panel Type SAS-SAMP
Other Items:
Fiber optic cables, connectors, ethernet cables, jack panels connectors, patch cords etc. for completing the Substation LAN as per specification requirements.
Transducers, Sensors etc. (if not considered in the respective equipment/ items) for accumulating monitoring data as per the specification requirements for switchyards.
Surge Arresters
Batteries & Battery Charger
Batteries (Sizing shall be as per requirement of technical specification)
220 V [Min. 600 AH]
48 V [Min. 600 AH]
Battery Charger System
220 V Float and Boost
50 V Float and Boost
Lighting System
Outdoor Lighting & other Works
Lighting Fixture Type FL-1
Lighting Fixture Type FL-2
Outdoor Receptacle
Type-RP
Type-RO
Substation Premises Lighting
Lighting poles
Type-L1
Type-D1
Street Lighting Type-SL-L1 for mounting on poles
Street Lighting Type-SL-D1 for mounting on Poles
Sub-Lighting Boxes/Panels Type -SLP at Lighting Mast and Other Loaction as designated complete with all controgears and accessories, items etc.
Lighting Panel Type ACP-2 as per technical specification
Lighting Panel Type ACP-3 as per technical specification
Indoor Lighting & Other Works
Electrification
Electric Fitting (if not covered under Civil Works) with G.I. Conduit, Junction Boxes, pull out boxes, copper wiring, Modular Switchboards, Modular Switches, GI Wire (16SWG) etc. for control room, Hall and administrative office building as per the requirements of the specifications
Illumiation
Lighting fixtures and Receptacles (including accessories/ materials etc. as per requirement alongwith complete accessories and mounting arrangements)
Indoor Lignting Panels
Lighting Panel (Indoor) Type ACP-1 as per technical specification
Lighting Panel (Indoor) Type DCP as per technical specification
Wall mounted fans Approx. 400 mm sweep
Ceiling Fan - Approx. 1400mm sweep with electronic Step regulator
Exhaust Fans
Fire Fighting System
Nitrogen Injection Fire Protection System for Auto Transformer (160 MVA ) complete in all respects.
DCP Type
Carbon di oxide type – 6 Liters.
Foam Type- 9 Liters
Sand type
i) GI Buckets 9 liters capacity
ii) Steel Stands for four buckets
Air Conditioning System
Air Conditioning for the Rooms specified in the specifications
1.1kV Grade PVC insulated Al. conductor FRLS power cables and copper conductor armoured FRLS control cables [Excluding the wiring required for electrical & Lighting fittings/fixtures installation in control room and other building]
Control Cable (PVC)
4 CX4 Sq. mm
19Cx2.5 sq.mm
Substation Structures
Standard Lattice Structure [Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure as per specification requirements]:
Non-Standard type Pipe Support Structure [Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for Pipe Support structure as per specification requirements]
Isolators
220 kV (3-Phase) (Horizontal DOUBLE BREAK)
1600A, 50KA, isolator with one E/S
Post insulators for above Isolator
1600A, 50KA, isolator with two E/S
Post insulators for above Isolator
1600A, 50KA, isolator without E/S
Post insulators for above Isolator
1600A, 50KA, isolator without E/S (TANDEM Type)
Post insulators for above Isolator
132 kV (3-Phase) (Horizontal DOUBLE BREAK)
1250A isolator without E/S
Post insulators for above Isolator
Switchyard Erection
Busbar & Interconnections
New Substation/ Switchyard
220 kV Switchyard Works:
Main-I Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/Porcelain Long Rod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays]
Main-II Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Pocelain Long Rod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays]
Aux Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string(DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays]
220 kV Overhead Jack Bus (for DMT Layout) on Twin ACSR Zebra(Bus-Coupler Bay)/ Single ACSR Zebra (Transformer/ Line on ACSR Zebra) with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, clamps, connectors, spacers etc. as per Substation Layout arrangement and specification requirements [ for 1 Bay]
Twin ACSR Zebra
Single ACSR Zebra
Equipment Interconnections to Main Bus, Overhead Bus including Single ACSR Zebra (for Line), Twin ACSR Zebra (forTransformer bay & B/C Bay), bus-bar materials, clamps, connectors, spacers, corona shields, including equipment connectors, Junction box including of all accessories etc. for the following:
220 kV DMT-type layout
Line bay
Transformer bay
Bus-Coupler
Bus CVT Interconnections to Main Buses including Single ACSR Zebra, clamps, connectors, junction box including of all accessories etc.
132 kV Switchyard Works:
Main Bus: 132 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/DS), AF Disc Insulators/ Porcelain Longrod Insulator, hardware, Clamps, Connectors, spacers etc. as per Layout arrangment of the subsation and specification requirements [for 4 bays]
Aux Bus: 132 kV Single ACSR Zebra Bus with conductor, busbar material, insulator string (DT/DS), AF Disc Insulators/ Porcelain Longrod Insulators, hardware, Clamps, Connectors, spacers etc. as per Layout arrangment of the subsation and specification requirements [for 4 bays]
132 kV Overhead Jack Bus (for Main & Aux Layout) on Twin ACSR Zebra(220 kV Transformer/Bus-Coupler Bay), Single ACSR Zebra(132 kV Transformer/Bus-Coupler Bay) Single ACSR Panther (Line on ACSR Panther) on Single Panther ( with conductor, busbar material, insulator string, Disc Insulators, hardware, clamps, connectors, spacers etc. as per Substation Layout arrangement and specification requirements [ for 1 Bay]
Twin ACSR Zebra
Equipment Interconnections to Main Bus, Overhead Bus including Twin ACSR Zebra (Bus Sectionalizer/ 220 kV Transformer /Bus-Coupler Bay)/ Single ACSR Zebra (132 kV Transformer Bay) Single ACSR Panther ( Line on ACSR Panther), bus-bar materials, clamps, connectors, spacers including equipment connectors, Junction box including of all accessories etc. for the following:
132 kV Main & Aux-type layout
Line bay
Transformer bay
Bus Post Insulators (BPI)
Earthing & Lightning Protection System
Main, Auxilary Earthmats, Risers etc. for complete earthing in the Switchyard Area
28 mm Dia MS Rod
50X12 mm GS Flat
Earth Enhancing Compound for treated pits as above and other requirement as per specification
Cleat type clamps(8mm thick) for earthing down conductor (10.98 mm dia), 50x12 mm GS Flat and 50x6 mm GS flat
Cu/Al Flexible braids Grounding Conductor connection to MS/GS Flats
Earth Wire for Shielding Protection of Switchyard
7/3.15 Galvenized Steel Wire
Earthwire tension clamps with D Shackle assembly
PG calmp to suit 7/3.15 mm GS earth wire
Cleat clamp on structure to suit 7/3.15 mm GS earth wire/ 50 X 12 mm GS Flat
Pad clamp on structure to suit 7/3.15 mm earth wire and 75 x 12 GS flat
Lug to suit 7/3.15 mm earth wire
Other Clamps, Copper Earth Bond etc. as per layout diagram for erection of Earth Wire
GI Channel 100x50x6 mm
Bay Marshalling KIOSK
200 way (Stud Type Connectors)
AC Distribution Boxes (Outdoor Type)
Conduits, Cable Trays [Perforated and Ladder Type], Cable Tags, Cable Clamps, Cable Lugs,Cable sealing system, Gland Plates, Junction Boxes, PVC pipes, hume Pipes, Nylon type Trefoil Clamps etc.[Excluding the conduits, junction boxes etc. required for electrical & Lighting fittings/fixtures installation in control room and other building]
Other Steel Structures/ members [items such as Galvenized/ Mild Steel Channels, Angles, Plates, round, joist, Hot dip galvenized Nut-Bolts, Electro Galvenized Spring Washers etc. considered for this component of price schedule] to be designed/ provided by the bidder for the completion of project [This shall not include the steel to be used in the civil works]
LT Switchgear
220V DCDB
48V DCDB
PLCC EQUIPMENTS
220 kV Wave trap (2000A, 0.5 mH, 40 kA)
SSB single Channel Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.
A.F. Protection coupler microprocessor based suitable for Four commands.
Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.
HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.
Microprocessor based 32/16 line Electronic Private Automatic Exchange (EPAX) with PLCC interphasing facility
Telephone Sets (Push Button Type)
5 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.5 mm
5 Pair jelly filled un armoured telephone cable having copper conductor of Dia. 0.5 mm
TESTING & MEASURING INSTRUMENTS, TOOLS & TACKLES AND MISCELLANEOUS ITEMS
(A) TESTING EQUIPMENT/ INSTRUMENTS [This shall consist of all the standard accessories, cables, software etc. required for satisfactory operation of equipment meeting functional requirements]
Insulation Tester (5000 Volts, Digital)
SF6 Leakage Detector
Digital Multimeter
Digital Clamp Meter
PLCC Maintenance/Testing Equipments:
Level generator with a range at 50Hz to 620kHz including facility for synchronization with SLM
8 digit time interval & frequency counter with the frequency range of 10 Hz to 10MHz & timer range of 1 microsec to 1 sec in decade steps.
Dual range 15 MHz oscilloscope with a display screen 8x10 sq.cm and the input impedance of 1 M ohm/25 pF with a deflection coefficient of 5Mv/div to 20 V/div.
4-1/2 digit LCD Multimeter with input impedance of 10Mohm & with a range of 0.1 mV to 1000 V DC, 0.1mV to 600v AC, 0-10 AMP AC,(40hz to 10KHz) & 0-20 Mohm With builtin power –supply.
Print testing Kit for PLCC terminal, protection coupler, EPAX , As per specifications appended at Annexure- V2-P3-S19-2, Volume-II, Part 3, Section-XIX
(B) Maintenance Tools& Tackles
Oil Sampling Bottle (1 Liter Capacity)
Vaccum Cleaner
Telescopic ladder aluminium 6 meter height
Ring spanner set
Tube spanner set
Pipe wrench 24 inch
Pipe wrench 18 inch
Hydraulic crimping tools up to 630 sq.mm
Threading die set for pipe threading
Welding machine (arc welding) 10kVA
Heavy duty drilling machine
Bench Vice
Insulated cuttingplier 12 inch
Insulated cuttingplier 8 inch
Screw driver 18 inch
Screw driver 12 inch
Hammer 8 lbs
Hammer 2 lbs
Chain pulley block 5 ton
Pipe derrick
Allen Keys
Box Spanners
(C )Office and Miscellaneous Equipments/ Items
Insulation Rubber mat (1mX2mX 12 mm)
Isulation Rubber Gloves (15 kV Tested)
Furniture for Control Room Building:
SCADA Room Furniture (Control Desk for specified consoles and Revolving Chair) matching with the overall interiors as per specification
Executive Desk bulit in wood and steel with lockable drawings on both side (6 feetX2 ½ feetx 2 ½ feet)
Junior executive table with three drawings on right side One Cup board left side with prelaminated decolam top 20mm thick over painted M.S. Frame ( 4 ½ feet x 2 ½ feetx 2 ½ feet).
Library Shelf with Glass Door (min 4 Shelf)
Steel tubular “S” type with continuous and one feet dia 14guage pipe, cane seat backing, teak wood with quality cane.
Archival Storage 4 Drive Type
Lateral Filing Cabinets
3 Drawer Unit
4 Drawer Unit
Steel Almirah of size 6 ½ feetx 3 feet x 19 inch with four shelves making five compartments in 22 guage or better with two way locking system.
Steel Almirah (with Glass doors) of size 6 ½ feetx 3 feet x 19 inch with four shelves making five compartments in 22 guage or better with two way locking system.
Minor Almirah of size 4 ½ feet x30 inch x 17 inch with three shelves making four compartments in 22 guage or better with two waylocking system.
Steel rack of size 5 feet x 3 feet x 16 inches with six shelves making five compartments (22 guage).
Steel file trays of size 16 inches x11 inches x 3 inches of guage 14 SWG.
Steel stools of size 15 inch x15 inch x 18 inch square pipe 16 guage
Steel waste paper baskets of size 12 inch (H) and Approx. 10 inch Dia Round.
Key board (wooden) with Glass door
First Aid Box
Shock Treatment Chart [Laminated with Frame]
Safety Instruction Boards [ Laminated with Frame]
(D) Drinking Water Arrangement
Water Cooler (Storage type, Storage Capacity 40 Ltr, Cooling Capcity 20 Ltr./hr)
RO/ Water Purifier
Refrigirator (380 Lt.)
Substation Name Board [1 No. Glow Type & 1 No. Painted Type] [Size and Color etc. be got approved from owner]
Danger Plate [Size and Color etc. be got approved from owner]
MANDATORY SPARES
(A) 220/132 kV TRANSFORMER
Bushing with metal parts & gaskets of each rating including Neutral bushing
Local and remote winding temperature indicator complete with sensing device & contacts
Oil temperature indicator with contacts & sensing device
Oil cooler pump with motor
Cooler fan with motor
Set of starter, contactor, relays and switch for electrical control panels (1 set of each type and range)
Buchholz relay complete with floats & contacts
(B)Circuit Breakers
(One pole of circuit breaker with grading capacitor complete with pole column and interrupter with M.B. but without support structure and operating mechanism.
Rubber gaskets, ‘O’ rings and seals
Fixed Contacts
Moving Contacts
Terminal pads and connectors
Closing Assembly Valve
Trip Assembly Valve
Auxiliary Switch Assembly
Operation Counter
Closing Coils
Tripping coils
Support insulator complete for one pole of breaker
One pole of circuit breaker without support structure and operating mechanism.
Rubber gaskets, ‘O’ rings and seals
Fixed Contacts
Moving Contacts
Terminal pads and connectors
Closing assembly valve
Trip assembly valve
Auxiliary switch assembly
Operation counter
Closing Coils
Tripping coils
Support insulator (set complete for one pole of breaker)
(C) Instrument Transformer
Spare of 245kV Capacitive Voltage Transformer
(i) Complete CVT
Spare of 245kV Current Transformer
(i) Complete CT [1 No. each type supplied)
Spare of 145kV Current Transformer
(i) Complete CT (1 No. each type supplied)
(D) C&R panels (similar items as used in the quoted panels)
Bay Control Unit (220 kV Side of offered type)
Bay Control Unit (132 kV Side of offered type)
Bay Unit (For 220 kV Busbar Protection of offered type)
Bay Protection Unit (Distance for 220 kV Feeders of offered type)
Bay Protection Unit (Line Distance cum Differential for 220 kV Feeders of offered type)
Bay Protection Unit (Distance for 132 kV Feeders of offered type)
Bay Protection Unit (Differential for 220 kV Transformers of offered type Main-I)
Bay Protection Unit (Differential for 220 kV Transformers of offered type-Main-II)
Self reset trip relay
Hand reset trip relay
Timer relay
DC supervision relays
Flag relays
Auxiliary relays
Multifunction Panel Meter
Fiber Optic Cable with Connectors
Transducers (Each Type used in the autoamtion system)
Ethernet Switch (of offered type)
(E) Surge Arrester
220kV class 198 kV rating LA complete as specified.
132kV class 120 kV rating LA complete as specified.
2 Nos. Terminal connector of each type as spare
(F) Battery & Battery Charger
220 V & 48 V Type Battery
Spare battery cell without electrolyte
Terminal connectors with bolts & Nuts
Float level indicators
Vent Plugs
220V/ 50V Battery Chargers
Set of Control Cards
Set of relays
Set of contactor
Micro-switches
Filter Capacitors
Thyristor/ Diode
Set of switches
Set of wound resistors
Potentiometers
Fuses of Thyristor with indicators
(G) LIGHTING SYSTEM
Single Pole MCB
Triple pole MCB
Fluorescent tube & Starter
a) Choke
b) Bottom Strips
c) Top covers & reflector (if applicable)
d) Holders
e) Complete fittings
Sodium vapour/Mercury vapour Lamps a) Lamp
b) Ballast
c) Condenser/ Igniter
d) Lamp holder
e) Lamp holder
f) Complete fittings
Incandescent lamp
a) Bulbs
b) Holders
c) Complete fittings
Switches and sockets
Junction box
Celing Fan
(H) Clamps & Connectors Set
(I) Fire Protection System
NIFPES System
Fitted Nitrogen Cylinder [48 Lit Water Capacity]
Hose Pipe with Fittings
Heat Sensor Assembly
Fire Survival Cable [sufficient for 1 system]
Limit Switches for Fire Detector
Fire Detector (for NIFPES System)
Thermostat
Heating Element
(J) Isolators
Solid core Insulator Stacks (Requirement of one Isolator)
Relays, power contactors, MCB’s switch fuses, push buttons and resistors, timers, key interlock for electrical control circuit as per approved schematic --- Each set containing one number of each type and rating as offered.
Limit switches & aux.switches--Each Set containing one no. of each type and rating as offered
Motor with gear assembly and bevel gear assembly.
Bearings (Requirement of one Isolator)
Current carrying assembly total (Requirement of one Isolator)
Solid core Insulator Stacks (Requirement of one Isolator)
Relays, power contactors, MCB’s switch fuses, push buttons and resistors, timers, key interlock for electrical control circuit as per approved schematic --- Each set containing one number of each type and rating as offered.
Limit switches & aux.switches--Each Set containing one no. of each type and rating as offered
Motor with gear assembly and bevel gear assembly.
Bearings (Requirement of one Isolator)
Current carrying assembly total (Requirement of one Isolator)
Add: Any other supply item, if any, bidder may require completing the substation as per specification requirements.
Description of Work / Item(s)
Amount
Service- ETC+ Civil
Auto Transformer:
220/132 kV, 160 MVA Auto Transformer with all accessories (excluding transformer Oil) as per technical specification
Insulating Oil for 160 MVA 220/132 kV Auto Transformer as per S-I , (1) above
Digital RTCC Panel consisting of Digital RTCC relay as per technical Specification for transformers at S-I (1) above
Circuit Breakers
220 kV Circuit Breakers
220kV circuit breakers (3 Ph.) Along with support Structure
132 kV Circuit Breakers
132 kV circuit breakers (3 Ph.) Along with support Structure
Instrument Transformers
Capacitor Voltage Transformer
Single-Phase, 220 kV, 4400 pf CVT
Current Transformer (1-Phase)
C&R Panels & SAS system (Complete in all respect, refer Section-V A, B, Part-III, Volume-II)
New Substation
Control Panel for 220 kV Transformer (220 kV Side) Type: SAS-THCB
Relay Panel for 220 kV Transformer (for both HV & MV) Type: SAS-THRB
Control Panel for 220 kV Feeder Type: SAS-FCB
Relay Panel for 220 kV Feeder Type: SAS-FRB
Control Panel for 220 kV Bus Coupler Type: SAS-BCCB
Relay Panel for 220 kV Bus Coupler Type: SAS-BCRB
220 kV Busbar Protection Relay Panel Type: SAS-BBRB
Control Panel for 220 kV Transformer (132 kV Side) Type: SAS-TLCB
Relay Panel for 220 kV Transformer (132 kV Side) Type: SAS-TLRB
Station HMI [Industrial grade Computer with 21"TFT monitor as per specification requirements]
Station HMI (Hot Standby)[Industrial grade Computer with 21"TFT monitor as per specification requirements]
HMI View Node[Industrial grad Computer with 21"TFT monitor as per specification requirements]
A3 Size B&W Laser Printer
Substation Automation System Network Panel Type SAS-NW
Modems (both sending and Receiving End) for communication to RCC & Sub SLDC for PLCC]
Data Concentrator Unit (DCU) at Substation for RAS mounted in suitable enclosure & fully wired
Software: Application as well as System Software as per specification requirements for various hardware elements for meeting of functional requirement of the specification.
Substation Auxiliary Monitoring Panel Type SAS-SAMP
Other Items:
Fiber optic cables, connectors, ethernet cables, jack panels connectors, patch cords etc. for completing the Substation LAN as per specification requirements.
Transducers, Sensors etc. (if not considered in the respective equipment/ items) for accumulating monitoring data as per the specification requirements for switchyards.
Surge Arresters
Batteries & Battery Charger
Batteries (Sizing shall be as per requirement of technical specification)
220 V [Min. 600 AH]
48 V [Min. 600 AH]
Battery Charger System
220 V Float and Boost
50 V Float and Boost
Lighting System
Outdoor Lighting & other Works
Lighting Fixture Type FL-1
Lighting Fixture Type FL-2
Outdoor Receptacle
Type-RP
Type-RO
Substation Premises Lighting
Lighting poles
Type-L1
Type-D1
Street Lighting Type-SL-L1 for mounting on poles
Street Lighting Type-SL-D1 for mounting on Poles
Sub-Lighting Boxes/Panels Type -SLP at Lighting Mast and Other Loaction as designated complete with all controgears and accessories, items etc.
Lighting Panel Type ACP-2 as per technical specification
Lighting Panel Type ACP-3 as per technical specification
Indoor Lighting & Other Works
Electrification
Electric Fitting (if not covered under Civil Works) with G.I. Conduit, Junction Boxes, pull out boxes, copper wiring, Modular Switchboards, Modular Switches, GI Wire (16SWG) etc. for control room, Hall and administrative office building as per the requirements of the specifications
Illumiation
Lighting fixtures and Receptacles (including accessories/ materials etc. as per requirement alongwith complete accessories and mounting arrangements)
Indoor Lignting Panels
Lighting Panel (Indoor) Type ACP-1 as per technical specification
Lighting Panel (Indoor) Type DCP as per technical specification
Wall mounted fans Approx. 400 mm sweep
Ceiling Fan - Approx. 1400mm sweep with electronic Step regulator
Exhaust Fans
Fire Fighting System
Nitrogen Injection Fire Protection System for Auto Transformer (160 MVA ) complete in all respects.
DCP Type
Carbon di oxide type – 6 Liters.
Foam Type- 9 Liters
Sand type
i) GI Buckets 9 liters capacity
ii) Steel Stands for four buckets
Air Conditioning System
Air Conditioning for the Rooms specified in the specifications
1.1kV Grade PVC insulated Al. conductor FRLS power cables and copper conductor armoured FRLS control cables [Excluding the wiring required for electrical & Lighting fittings/fixtures installation in control room and other building]
Control Cable (PVC)
4 CX4 Sq. mm
19Cx2.5 sq.mm
Substation Structures
Standard Lattice Structure [Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure as per specification requirements]:
Non-Standard type Pipe Support Structure [Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for Pipe Support structure as per specification requirements]
Isolators
220 kV (3-Phase) (Horizontal DOUBLE BREAK)
1600A, 50KA, isolator with one E/S
Post insulators for above Isolator
1600A, 50KA, isolator with two E/S
Post insulators for above Isolator
1600A, 50KA, isolator without E/S
Post insulators for above Isolator
1600A, 50KA, isolator without E/S (TANDEM Type)
Post insulators for above Isolator
132 kV (3-Phase) (Horizontal DOUBLE BREAK)
1250A isolator without E/S
Post insulators for above Isolator
Switchyard Erection
Busbar & Interconnections
New Substation/ Switchyard
220 kV Switchyard Works:
Main-I Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/Porcelain Long Rod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays]
Main-II Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Pocelain Long Rod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays]
Aux Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string(DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays]
220 kV Overhead Jack Bus (for DMT Layout) on Twin ACSR Zebra(Bus-Coupler Bay)/ Single ACSR Zebra (Transformer/ Line on ACSR Zebra) with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, clamps, connectors, spacers etc. as per Substation Layout arrangement and specification requirements [ for 1 Bay]
Twin ACSR Zebra
Single ACSR Zebra
Equipment Interconnections to Main Bus, Overhead Bus including Single ACSR Zebra (for Line), Twin ACSR Zebra (forTransformer bay & B/C Bay), bus-bar materials, clamps, connectors, spacers, corona shields, including equipment connectors, Junction box including of all accessories etc. for the following:
220 kV DMT-type layout
Line bay
Transformer bay
Bus-Coupler
Bus CVT Interconnections to Main Buses including Single ACSR Zebra, clamps, connectors, junction box including of all accessories etc.
132 kV Switchyard Works:
Main Bus: 132 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/DS), AF Disc Insulators/ Porcelain Longrod Insulator, hardware, Clamps, Connectors, spacers etc. as per Layout arrangment of the subsation and specification requirements [for 4 bays]
Aux Bus: 132 kV Single ACSR Zebra Bus with conductor, busbar material, insulator string (DT/DS), AF Disc Insulators/ Porcelain Longrod Insulators, hardware, Clamps, Connectors, spacers etc. as per Layout arrangment of the subsation and specification requirements [for 4 bays]
132 kV Overhead Jack Bus (for Main & Aux Layout) on Twin ACSR Zebra(220 kV Transformer/Bus-Coupler Bay), Single ACSR Zebra(132 kV Transformer/Bus-Coupler Bay) Single ACSR Panther (Line on ACSR Panther) on Single Panther ( with conductor, busbar material, insulator string, Disc Insulators, hardware, clamps, connectors, spacers etc. as per Substation Layout arrangement and specification requirements [ for 1 Bay]
Twin ACSR Zebra
Equipment Interconnections to Main Bus, Overhead Bus including Twin ACSR Zebra (Bus Sectionalizer/ 220 kV Transformer /Bus-Coupler Bay)/ Single ACSR Zebra (132 kV Transformer Bay) Single ACSR Panther ( Line on ACSR Panther), bus-bar materials, clamps, connectors, spacers including equipment connectors, Junction box including of all accessories etc. for the following:
132 kV Main & Aux-type layout
Line bay
Transformer bay
Bus Post Insulators (BPI)
Earthing & Lightning Protection System
Main, Auxilary Earthmats, Risers etc. for complete earthing in the Switchyard Area
28 mm Dia MS Rod
Placing of earth electrode of 25 / 28mm dia. M. S. Rod of length 7.50 meters (approx.) to a depth of 8.00 meters :
50X12 mm GS Flat
Earth Enhancing Compound for treated pits as above and other requirement as per specification
Cleat type clamps(8mm thick) for earthing down conductor (10.98 mm dia), 50x12 mm GS Flat and 50x6 mm GS flat
Cu/Al Flexible braids Grounding Conductor connection to MS/GS Flats
Earth Wire for Shielding Protection of Switchyard
7/3.15 Galvenized Steel Wire
Earthwire tension clamps with D Shackle assembly
PG calmp to suit 7/3.15 mm GS earth wire
Cleat clamp on structure to suit 7/3.15 mm GS earth wire/ 50 X 12 mm GS Flat
Pad clamp on structure to suit 7/3.15 mm earth wire and 75 x 12 GS flat
Lug to suit 7/3.15 mm earth wire
Other Clamps, Copper Earth Bond etc. as per layout diagram for erection of Earth Wire
Bay Marshalling KIOSK
200 way (Stud Type Connectors)
AC Distribution Boxes (Outdoor Type)
Conduits, Cable Trays [Perforated and Ladder Type], Cable Tags, Cable Clamps, Cable Lugs,Cable sealing system, Gland Plates, Junction Boxes, PVC pipes, hume Pipes, Nylon type Trefoil Clamps etc.[Excluding the conduits, junction boxes etc. required for electrical & Lighting fittings/fixtures installation in control room and other building]
Other Steel Structures/ members [items such as Galvenized/ Mild Steel Channels, Angles, Plates, round, joist, Hot dip galvenized Nut-Bolts, Electro Galvenized Spring Washers etc. considered for this component of price schedule] to be designed/ provided by the bidder for the completion of project [This shall not include the steel to be used in the civil works]
LT Switchgear
220V DCDB
48V DCDB
PLCC EQUIPMENTS
220 kV Wave trap (2000A, 0.5 mH, 40 kA)
SSB single Channel Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.
A.F. Protection coupler microprocessor based suitable for Four commands.
Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.
HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.
Microprocessor based 32/16 line Electronic Private Automatic Exchange (EPAX) with PLCC interphasing facility
Telephone Sets (Push Button Type)
5 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.5 mm
5 Pair jelly filled un armoured telephone cable having copper conductor of Dia. 0.5 mm
CIVIL WORKS
TOWER/ EQUIPMENT FOUNDATIONS :
LATTICE / PIPE STRUCTURE
Marshalling Kiosk
220 kV Equipment Structure
220 kVISO (3-Phase)
220 kVISO (3-Phase) - Tandem
220 kV BPI
220 kV CVT
132 kV Equipment Structure
132 kVISO (3-Phase)
132 kV BPI
FOUNDATION FOR 160 MVA, 220/132 kV TRANSFORMER:-
Civil works for MS Tank including Excavation, Laying of 75 mm PCC, Constructing brick wall jacket around the tank, laying of 200 mm RCC raft, leveling and alignment of MS Tank, backfilling with excavated sand, Top leveling by laying of PCC, as per site requirement and Technical specifications (complete job).As per specification for 160 MVA, 220/132 kV Transformer
CABLE TRENCH
Type A Cable trench
Type C Cable trench
Construction of RCC sump having capacity 10000 Liters with provision of automatic dewatering mud pump with disposal arrangement upto outside RVPN premises as directed by Engineeer In-charge with provision of a stand by pump.
CABLE TRENCH CROSSING
Road crossing for 'A' type cable trenches
Road crossing for 'C' type cable trenches
Grading of yard including all cutting and filling:-
Supply and stacking earth material obtained from borrow pits with all leads and lifts, transporting to site, spreading, grading to required slope & compacting by vibratory roller 8-10 Ton to meet requirement of table 300-2 including cost of compensation for earth taken from private land with all lead as per MORTH specification clause no. 305.
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas including filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including with all lead and lift. All kinds of soil.
ANTI WEED TREATMENT AND BASE LAYER OF INTERLOCKING TILES
Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001
JELLY SPREADING (Gravelling)
Providing and laying 100mm thick layer of granite/basalt/trap jelly(gravel) of 40mm single size shall be spread over the entire switchyard area as per drawing and directions of engineer incharge of the work. The whole switchyard area (excluding buildings pathway road, drainages, cable trenches, equipments/ structures/ plinths etc.) shall be covered with jelly spreading. The jelly used shall be free from dirt, organic materials and flakes.
Supply & Fixing Barricades to confine Jelly (gravel), which include Supply and fixing cement concrete solid blocks of size 60x(20+25)/2x30 cms (l, b, h) jointed with CM 1:4, made from precast M-20 concrete and laid over 100 mm thick base of PCC 1:4:8 including necessary curing etc. complete. The top of concrete block shall be 100 mm above gravel top with provision of suitable openings for drainage of rain water. The exposed surface of barricades shall be applied with two coat of water proof cement paint.
ROAD WORK
Construction of unreinforced, dowel jointed plain cement cocrete pavement in 150 mm thickness over and including sub-base of 150 mm thick quarry rubbish and 100 thick PCC 1:4:8 with M 30 grade cement concrete laid in approved side form work(steel channels , laying and fixing 125 micron thick polythene film wedged, steel plates including leveling the form work as per drawing, spreading using shovels, rakes, compacted using needdle, plate and screed vibrator finished in continuous operation including provision of expansion and contraction and construction joints, applying debonding strips, primer, sealant, dowel bars at expansion & construction joints only, curing etc complete including dewatering process with all equipments. work also includes providing and fixing precast cement concrete solid blocks on outer edges of both sides shoulder of size 60x(20+25)/2x30 cms (l, b, h) jointed with CM 1:4, made from precast M-20 concrete and laid over 100 mm thick base of PCC 1:4:8 including necessary curing etc. complete. The concrete block top shall be 100 mm above road top, with provision of suitable openings for drainage of rain water. The exposed surface of concrete blocks shall be applied with two coat of enamel paint, painted black and yellow alternately, and Providing and laying 80 mm thick M 30 interlocking tiles Category A Denated units to key into each other on four faces zig zag shape over 100 mm PCC 1:4:8, complete as per IRC SP 63:2004 specification on shoulders as per approved drawing, specification and direction of engineer incharge(payment shall be made as per actual length).
5.0 Mtr. Wide Road with shoulders of 1 m on both side of CC road
4.0 Mtr. Wide Road with shoulders of 1 m on both side of CC road
3.0 Mtr. Wide Road. with shoulders of 0.50 m on both side of CC road
CONTROL ROOM BUILDING
Extensionn of existing control room building per design & drawing and specification including internal electricafication with Energy Efficient Lights , Tube light fixtures etc, 15 lit storage geyser, earthing, sanitary system including septic tanks, soakage pits and rain water harvesting system as per drawing approved by owner/GWD etc., water supply system including making connection with distribution system, false ceiling (In Hall, PLCC room and XEN chamber), fans,, internal cable trenches covered with 6 mm thick MS chequred plates, plinth protection works with chequred tiles etc (plinth area approximately 150 sqm, with out roof projections, plinth protection and porch)
Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458 mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joints including testing of joints etc. complete for 300 mm dia internal dia pipe including Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design and Excavating trenches of required width for pipes cables etc. including excavation for sockets, depth up to required depth including taking out the excavated materials, refilling the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, with all lead and lifts in all types of soil, rocks etc complete in all respect.
RAIN WATER HARVESTING: Designing and providing storm water drainage along with Rainwater harvesting by providing two numbers recharge structures with bore wells as per technical specifications.
ESHS Cost Schedule
Resources allocated to ESHS management
Drafting and updating the ESHS documentation, reporting, inspections
Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene
Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:
i) Accommodation
ii) Meals
iii) Transport
Training and local recruitment management costs
Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management
Traffic, noise and atmospheric emissions management, land take
Waste and hazardous products management
Vegetation clearing and site rehabilitation
Add: Any other item bidder may require to complete the Civil works as per specification requirements
Description of Work / Item(s)
Amount
MAIN MATERIAL/ ITEMS
Current Transformer (1-Phase)
C&R Panels & SAS system (Complete in all respect, refer Section-V A, B, Part-III, Volume-II)
New Substation
Upgrade of Existing Busbar Protection System
Upgrade/ New Hardware & Software as required for integration to Existing RTU/SCADA and RAS System
Other Items:
Fiber optic cables, connectors, ethernet cables, jack panels connectors, patch cords etc. for completing the Substation LAN as per specification requirements.
Transducers, Sensors etc. (if not considered in the respective equipment/ items) for accumulating monitoring data as per the specification requirements for switchyards.
Surge Arresters
Lighting System
Outdoor Lighting & other Works
Lighting Fixture Type FL-1
Lighting Fixture Type FL-2
Outdoor Receptacle
Type-RP
Type-RO
Sub-Lighting Boxes/Panels Type -SLP at Lighting Mast and Other Loaction as designated complete with all controgears and accessories, items etc.
Lighting Panel Type ACP-2 as per technical specification
Fire Fighting System
DCP Type
Sand type
i) GI Buckets 9 liters capacity
ii) Steel Stands for four buckets
1.1kV Grade PVC insulated Al. conductor FRLS power cables and copper conductor armoured FRLS control cables [Excluding the wiring required for electrical & Lighting fittings/fixtures installation in control room and other building]
Control Cable (PVC)
4 CX4 Sq. mm
19Cx2.5 sq.mm
Isolators
220 kV (3-Phase) (Horizontal DOUBLE BREAK)
2000A, 50KA, isolator with one E/S
Post insulators for above Isolator
2000A, 50KA, isolator with two E/S
Post insulators for above Isolator
2000A, 50KA, isolator without E/S
Post insulators for above Isolator
2000A, 50KA, isolator without E/S (TANDEM Type)
Post insulators for above Isolator
Switchyard Erection
Busbar & Interconnections
New Substation/ Switchyard
220 kV Switchyard Works:
220 kV Overhead Jack Bus (for DMT Layout) on Twin ACSR Zebra(Bus-Coupler Bay)/ Single ACSR Zebra (Transformer/ Line on ACSR Zebra) with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, clamps, connectors, spacers etc. as per Substation Layout arrangement and specification requirements [ for 1 Bay]
Single ACSR Zebra
Equipment Interconnections to Main Bus, Overhead Bus including Single ACSR Zebra (for Line), Twin ACSR Zebra (forTransformer bay & B/C Bay), bus-bar materials, clamps, connectors, spacers, corona shields, including equipment connectors, Junction box including of all accessories etc. for the following:
220 kV DMT-type layout
Line bay
Bus Post Insulators (BPI)
Earthing & Lightning Protection System
Main, Auxilary Earthmats, Risers etc. for complete earthing in the Switchyard Area
28 mm Dia MS Rod
50X12 mm GS Flat
Earth Enhancing Compound for treated pits as above and other requirement as per specification
Cleat type clamps(8mm thick) for earthing down conductor (10.98 mm dia), 50x12 mm GS Flat and 50x6 mm GS flat
Cu/Al Flexible braids Grounding Conductor connection to MS/GS Flats
Earth Wire for Shielding Protection of Switchyard
7/3.15 Galvenized Steel Wire
Earthwire tension clamps with D Shackle assembly
PG calmp to suit 7/3.15 mm GS earth wire
Pad clamp on structure to suit 7/3.15 mm earth wire and 75 x 12 GS flat
Lug to suit 7/3.15 mm earth wire
Other Clamps, Copper Earth Bond etc. as per layout diagram for erection of Earth Wire
Bay Marshalling KIOSK
200 way (Stud Type Connectors)
LT Switchgear
PLCC EQUIPMENTS
220 kV Wave trap (2000A, 0.5 mH, 40 kA)
SSB single Channel Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set. ( The make should be same as installed at 220kV GSS Chainpura Chhota)
A.F. Protection coupler microprocessor based suitable for Four commands. ( The make should be same as installed at 220kV GSS Chainpura Chhota)
Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.
HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.
GI Channel 100x50x6 mm
Office and Miscellaneous Equipments/ Items
Insulation Rubber mat (1mX2mX 12 mm)
Isulation Rubber Gloves (15 kV Tested)
Insulated earthing Rods (Bolted Type on both ends)
Telescopic ladder aluminium 6 meter height
Add: Any other supply item, if any, bidder may require completing the substation as per specification requirements.
Description of Work / Item(s)
Amount
Service- ETC+ Civil
Current Transformer (1-Phase)
C&R Panels & SAS system (Complete in all respect, refer Section-V A, B, Part-III, Volume-II)
New Substation
Upgrade of Existing Busbar Protection System
Upgrade/ New Hardware & Software as required for integration to Existing RTU/SCADA and RAS System
Other Items:
Fiber optic cables, connectors, ethernet cables, jack panels connectors, patch cords etc. for completing the Substation LAN as per specification requirements.
Transducers, Sensors etc. (if not considered in the respective equipment/ items) for accumulating monitoring data as per the specification requirements for switchyards.
Surge Arresters
Lighting System
Outdoor Lighting & other Works
Lighting Fixture Type FL-1
Lighting Fixture Type FL-2
Outdoor Receptacle
Type-RP
Type-RO
Sub-Lighting Boxes/Panels Type -SLP at Lighting Mast and Other Loaction as designated complete with all controgears and accessories, items etc.
Lighting Panel Type ACP-2 as per technical specification
Fire Fighting System
DCP Type
Sand type
i) GI Buckets 9 liters capacity
ii) Steel Stands for four buckets
1.1kV Grade PVC insulated Al. conductor FRLS power cables and copper conductor armoured FRLS control cables [Excluding the wiring required for electrical & Lighting fittings/fixtures installation in control room and other building]
Control Cable (PVC)
4 CX4 Sq. mm
19Cx2.5 sq.mm
Isolators
220 kV (3-Phase) (Horizontal DOUBLE BREAK)
2000A, 50KA, isolator with one E/S
Post insulators for above Isolator
2000A, 50KA, isolator with two E/S
Post insulators for above Isolator
2000A, 50KA, isolator without E/S
Post insulators for above Isolator
2000A, 50KA, isolator without E/S (TANDEM Type)
Post insulators for above Isolator
Switchyard Erection
Busbar & Interconnections
New Substation/ Switchyard
220 kV Switchyard Works:
220 kV Overhead Jack Bus (for DMT Layout) on Twin ACSR Zebra(Bus-Coupler Bay)/ Single ACSR Zebra (Transformer/ Line on ACSR Zebra) with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, clamps, connectors, spacers etc. as per Substation Layout arrangement and specification requirements [ for 1 Bay]
Single ACSR Zebra
Equipment Interconnections to Main Bus, Overhead Bus including Single ACSR Zebra (for Line), Twin ACSR Zebra (forTransformer bay & B/C Bay), bus-bar materials, clamps, connectors, spacers, corona shields, including equipment connectors, Junction box including of all accessories etc. for the following:
220 kV DMT-type layout
Line bay
Bus Post Insulators (BPI)
Earthing & Lightning Protection System
Main, Auxilary Earthmats, Risers etc. for complete earthing in the Switchyard Area
28 mm Dia MS Rod
Placing / Driving of earth electrode of 25 / 28mm dia. M. S. Rod of length 3.30 meters (approx.) to a depth of 3.80 meters : Hard rock (with blasting subject to permission or without blasting)
50X12 mm GS Flat
Earth Enhancing Compound for treated pits as above and other requirement as per specification
Cleat type clamps(8mm thick) for earthing down conductor (10.98 mm dia), 50x12 mm GS Flat and 50x6 mm GS flat
Cu/Al Flexible braids Grounding Conductor connection to MS/GS Flats
Earth Wire for Shielding Protection of Switchyard
7/3.15 Galvenized Steel Wire
Earthwire tension clamps with D Shackle assembly
PG calmp to suit 7/3.15 mm GS earth wire
Pad clamp on structure to suit 7/3.15 mm earth wire and 75 x 12 GS flat
Lug to suit 7/3.15 mm earth wire
Other Clamps, Copper Earth Bond etc. as per layout diagram for erection of Earth Wire
Bay Marshalling KIOSK
200 way (Stud Type Connectors)
PLCC EQUIPMENTS
220 kV Wave trap (2000A, 0.5 mH, 40 kA)
SSB single Channel Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set.
A.F. Protection coupler microprocessor based suitable for Four commands.
Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level.
HF Armoured Coaxial cable having 75 Ohms unbalanced impendance.
ESHS Cost Schedule
Resources allocated to ESHS management
Drafting and updating the ESHS documentation, reporting, inspections
Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene
Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:
i) Accommodation
ii) Meals
iii) Transport
Training and local recruitment management costs
Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management
Traffic, noise and atmospheric emissions management, land take
Waste and hazardous products management
Vegetation clearing and site rehabilitation
Add: Any other item bidder may require to complete the Civil works as per specification requirements
Mangal Electrical Industries Pvt Ltd (BID ID -3047513)
Mangal Electrical Industries Pvt Ltd (BID ID -3047513)
Mangal Electrical Industries Pvt Ltd (BID ID -3047513)
AMARA RAJA INFRA PRIVATE LIMITED (BID ID -3054236)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid