Day to day maintenance of Staff Quarters in Aliganj (Sector-D, K, Chandralok) and Vikas Nagar under BSNL Civil Service Centre, Aliganj, Lucknow during the year 2020-21.

Amount

Deduct for not providing hinges in doors, windows or clerestory window shutters with :

Stainless steel butt hinges with stainless steel screws :

For 2nd class teak wood and other class of wood shutters.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

Providing and fixing white vitreous china water closet squatting pan (Indian type) :

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :

Flat back wash basin of size 550x400 mm.

LMR ITEMS

Providing manual assistance for attending petty day-to-day maintenance services as & when required i/c all required T&P and scaffolding etc. (Note: Minimum time shall be reckoned as half day even if the time required for doing the job is less than half a day. Material required for maintenance shall be supplied free of cost.)

Skilled manual Assistance

Dismantling and removal of existing broken Indian type/ Orissa pattern WC seat & pedestals etc. carefully at any floor upto floor five level including disposal of malba to the dumping ground.

Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day work at one site shall be taken as one job.)

Supplying of fittings & fixtures for day to day maintenance work of approved quality and direction of Engineer-in-charge.

PTMT Short Body Bibcock 15mm nominal bore.

PTMT Long Body Bibcock 15mm nominal bore

PTMT Pillar cock 15mm nominal bore.

PTMT Stop cock 15mm nominal bore.

PTMT Grating 100mm dia.

PTMT Ballcock for PVC Tank 20mm

Flexible (coil shaped) PVC Waste Pipe 40 mm dia with length not less than 700 mm including PVC waste fittings.

Semi rigid PVC wast pipe for sink and wash basin 32mm dia with length not less than 700mm including PVC waste fittings.

Unplasticised PVC Connection pipe with brass union 45 cm long 15 mm nominal bore.

PVC Lid/ Cover (white) for Euoropean wc seat.

Anodised aluminium sliding door bolt size 250x16mm

Anodised aluminium tower bolt size 150x10mm

Anodised aluminium tower bolt size 100x10mm

Anodised aluminium handle size 125mm

Anodised aluminium handle size 100mm

PTMT waste jali size 32 mm

PVC Cistern handle lever.

PVC Cistern internal fittings.

GI nipple 15mm dia 50mm long.

GI nipple 15mm dia 100mm long.

GI nipple 15mm dia 150mm long.

GI nipple 20mm dia 100mm long.

GI socket size 15mm dia.

GI elbow size 15mm dia.

CP Brass Pillar Cock

CP Brass Bib Cock

GI Tee 15 dia nominal bore.

GI long screw 15 mm nominal bore.

SS water jet (flat type) for European seats with PVC lead

Hand Shower with 1.5 metre flexible tube and hook

Steel Screw 20 x 6mm

Steel Screw 38 x 8mm

MS Screw 38 x 8mm (Wood works)

MS Screw 20 x 6mm (Wood works)

Nails of different shape & size (1 kg. each)

PVC Cistern washer

CP Brass bib-cock Spindle (L&K or eq.)

Brass bib-cock washer

GI Pipe 15 mm nominal bore ( B- class )

GI Pipe 20 mm nominal bore ( B- class )

GI Pipe 25 mm nominal bore ( B- class )

GI Union 15 mm nominal bore

GI Union 20 mm nominal bore

GI Union 25 mm nominal bore

600x450 mm beveled edge mirror of superior glass (of approved quality) with 6 mm thick hard board , 4 Nos PVC Sleaves C.P. brass screws and washers

Supply of fittings & fixtures of approved quality, as & when required for day-to-day works, as per direction of Engineer-in-charge.

Cement

Coarse Sand

Putty for fixing glass panes (1kg. Pack)

Credit of unserviceable fittings and other materials recieved from dismantling:

Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc.

Old rusted (unserviceable) C.I./S.C.I. Pipes and fittings, Mild Steel/ Steel Sections, G.I./M.S. Pipes etc.

Old (unserviceable) wooden Door Shutter (Of area 3 sq. metres and below)

Old (unserviceable) PVC flushing cistern of all sizes.