Repair renovation of Qtr No 305 block U3 at Gulshan Ground Jammu

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead including all carriages and cost of material involved.(1:4) Mix (1 cement : 4 course sand).

Providing and fixing panelled or panelled and glazed shutters for doors, windows, clerestory windows, including ISI marked M S pressed butt hinges bright finished of required size with necessary screws including paneling and glazing all complete as per direction of EIC with deodar wood.(35mm thick)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (as directed by the EIC at site).

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats)

Providing and fixing Sanitary fittings/ fixtures of approved brand like Jaguar, Parko, Cera , Kerovit or equivalent. (as directed by EIC)

C P Bib cock long nose

C P Bib cock short Body

C P Angle valve

Waterproofing of all surfaces as directed by EIC by cleaning the surface with wire brush to make the surface free from all loose particles, dust, etc, then Repairing/making the corner fillets (i.e Gola ) with Dr, Fixit Pidicrete URP 301 or equivalent waterproofing compound in cement and sand mortar in the ratio of 5ltr.URP : 1 cement : 4 sand. Then applying one coat of Dr. Fixit Tourch shield Primer (@ 1 ltr per 3.5 to 4 Sqm) or Equivalent with brush over the surface prepared for waterproofing. After primer coat Dr. Fixit Tourch shield membrane 3160 (3 mm thick) or equivalent is layed over all horizontal and vertical surfaces prepared with tourching and sealing of overlapped joints (Min. overlap of joints = 100 mm).including all carriages and cost of material involved.

M/S ABDUL MAJID SEH

NARESH GUPTA CONTRACTOR