Kalidas Marg sthit Awas Sankhya-11 (Maanniya Mukhya Nyayadhish Awas) me samast darwazon/khidkiyon ki polish karna, bathroom ki shatigrast tiles badalna, suraksha karmiyon hetu shade dalna, awas me Endura tiles par floor paint karna, awas ke vahya bha

Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DSR No-15.56, (Rs-54.65/43.17)

15 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.5.1, (Rs-411.75/335.02)

Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. DSR-13.88, Rs-19.75/15.60

Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), Rs-156.05/123.27

Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), Rs-131.3/103.72

Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), Rs-226.25/178.73

Finishing with Premium Smooth Indigo Floor Coat Emulsion Paint including Supply of all Material Labour and T&P etc. required for Proper Copletion of the work. (Two or more Coat applied @ 2.00 ltr/10 sqm),

Polishing in high gloss/matt finish Melamine clear Polish on wood work in required colour/wooden shade texture with following process in the Sequence as detailed below.1-The surface to be polished in rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2-Applying two coats of sealer with spray gun and allowing sufficient drying time for lst coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3-On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface futher smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface in furface allowed to dry for 12 hrs.4- On this, lst coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs than this dry surface is again fine wet rubbed smooth, which is futher allowed to dry for 12 hrs. the final melamine polish ia applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of engineer - in- charge. (Final coat to be done in 1 or 2 layers without gap of time) DSR.N0-13.116), Rs-1360.45/1074.69

Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. DSR.N0-15.23.1, (Rs-73.4/59.72)

Providing and laying Rectifited Glazed Ceramic Floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.40) (Rs-1439.4/1137.05