Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Finance | ₹1.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.7 Cr+₹27.4 L (19.3%)Admitted-Finance | ₹1.7 Cr+₹27.4 L (19.3%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Fee 111 90 VIJAY PATH MANSAROVAR JAIPUR RAJASTHAN 302020 | JAIPUR | RAJASTHAN | 302020 | - | - | Not Admitted-Fee Fee not received |
| 4 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified |
| Sl No | Description | Qty | Unit | Raj Electricals L1 | M.M. Brothers L2 |
|---|---|---|---|---|---|
| 1.00 | All Weather Loudspeakers : with all necessary accessories to comply the installation: Supply, installation, testing and commissioning of 2-way IP55 rated (as per IEC 529) indoor/outdoor surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 59Hz to 20kHz; Power handling of 400Watt peak; Nominal dispersion of 120°(H) × 120°(V); Sensitivity of 88 dB SPL and Max SPL of 114 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 5/10/20/40/80W@100V or better. The loudspeaker system shall be comprised of a powder-coated aluminum grill; 6.5-inch weather-treated woofer and 1.25 inch neodymium dome tweeter coaxially mounted enclosed in engineered-plastics with an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated and shall be packed in pairs. preferable Makes: Martin Audio/Tannoy/Bose (Engineer Incharge will be final for Approval of any material) | 62 | Nos | 79,842 ₹49,50,204 Lowest | 94,032 ₹58,29,984 |
| 2.00 | Digital Networked Power Amplifier with all necessary accessories to comply the installation Supply, installation, testing & Comissioning of 4 channel class D Power amplifier with a Max Output Power of 4x500W@4/8 ohms, or bridged mode output power of 2 x 500W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc. The Damping factor shall be >5000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot. Warranted for at least 5 years. preferable Makes: PowerSoft/QSC/Bose (Engineer Incharge will be final for Approval of any material) | 2 | Nos | 2,98,135 ₹5,96,270 Lowest | 3,74,984 ₹7,49,968 |
| 3.00 | Digital Signal Processor with all necessary accessories to comply the installation :Supply, installation, testing and commissioning of digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better. DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall have Dante digital audio networking up to 64 x64 channels, an Ethernet connection for control and programming on an RJ-45 jack. GPIO – 5x5 general-purpose I/O control, USB audio and 8 or better digital output channels on an RJ-45 jack. It shall have Serial Port – 3-wire RS-232C (DTE) serial interface connection. It shall Supports remote zone controllers. Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz; THD : < 0.002 % or better ,Maximum Input Level +24 dBu; Phantom Power +48 VDC, 10 mA, selectable per input. The audio DSP shall include configurable signal processing, signal routing and mixing, equalization, filtering, dynamics, delay, as well as control, monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante endpoints. preferable Makes: Biamp /Symetrix /Ashly Audio /Bose (Engineer Incharge will be final for Approval of any material) | 1 | Nos | 3,06,116 ₹3,06,116 Lowest | 3,31,295 ₹3,31,295 |
| 4.00 | Audio Output Interface
Networked audio output expansion device with 4 line-level output channels, plus Emergency Message storage Supply, installation, testing and commissioning of networked audio output expansion device with 4 line-level output channels.The audio output device shall be designed in such a manner that provide audio and control by Layer-2 protocol . It shall have Local storage of Emergency Messages in non-volatile memory, receive Power over Ethernet (PoE) utilizing a single (CAT5) network cable to a rear panel RJ45 connector. The output device shall provide four removable terminal block connectors for linelevel audio outputs, four control inputs, and four control outputs. It shall have channel-to-channel and device-to-device failover,local non-volatile storage of Emergency Messages,dual PoE capable with alternate powering from auxiliary 24V DC supply (dual inputs), Page Active Relays, Control Inputs, and Control OutputsThe audio output device shall provide local digital audio signal processing and local storage of configuration data,signal processing including volume control, filters, compressor/limiting, delay, speaker equalization. The audio output device shall indicate signal and clip with LEDs on the front panel. preferable Makes: Biamp /Symetrix /Ashly Audio /Bose (Engineer Incharge will be final for Approval of any material) | 4 | Nos | 2,36,488 ₹9,45,952 | 2,06,712 ₹8,26,848 Lowest |
| 5.00 | "Message Server
Enhanced Networked Messaging Processor SITC of networked messaging processor. The Playing live & Pre-recorded server shall networked based & to be rack mountable in one rack space (1RU) and shall support advanced paging functionalities such as recorded message storage and playback, system configuration storage, event scheduling, time server support, storage of logged system data, VoIP triggered paging, email notification, and remote third party control capability. The processor shall feature a status LED and separate ports for TCP/IP Control and networked based Layer-2 or above protocol . The message Server shall be CE marked and shall be compliant with the RoHS directive.preferable Makes: Biamp /Symetrix /Ashly Audio
(Engineer Incharge will be final for Approval of any material) | 1 | Nos | 6,74,727 ₹6,74,727 Lowest | 7,11,532 ₹7,11,532 |
| 6.00 | "Paging Station Emergency Wall-mounted Paging Station, 10 Buttons with hand-held microphone (EN 54-16 certified) Supply, installation, testing and commissioning of EN 54-16 certified wall-mounted paging station to provide paging audio and network control data via network cable and using PoE power from RJ-45 connector. It shall have 10 or more buttons with mutliple functions e.g .direct page ,zone recall etc. It shall provide multi level paging priorities functions and facility for override, store and forward, and keypad lock-out . It shall have inbuilt DSP ,data storage. It should have LED/LCD backlit screen, access via special code ,sutiable to work in high noise area with inbuilt noise-cancelling microphone. It shall be CE, RoHS compliant and EN 54-16 certified. preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material) | 1 | Nos | 1,77,248 ₹1,77,248 Lowest | 1,95,654 ₹1,95,654 |
| 7.00 | Audio Input Interface Networked audio input device with 6 channels of BGM or user configurable mic/line audio Supply, installation, testing and commissioning of networked audio input expansion device .The audio input device shall provide audio and control via networked based Layer-2 or above protocol. It shall receive Power over Ethernet (PoE). The audio input device shall provide four sets of dual RCA connectors plus removable terminal block connectors for line-level inputs, two microphone/line inputs with phantom power, four paging inputs, six Rj45 outputs, four control inputs, and four control outputs. Software-configurable local audio signal processing including gain, filters, and compressor/limiter. The input device shall indicate signal and clip with LEDs on the front panel. The input device shall be CE marked and shall be compliant with the RoHS directive. preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material) | 1 | Nos | 2,27,873 ₹2,27,873 Lowest | 2,37,176 ₹2,37,176 |
| 8.00 | "Audio Player Versatile DAB+ and FM RDS / CD / USB / SD-card /Bluetooth music source, RS232 control, IR remote included, 1U, 19""
Supply, installation, testing and commissioning of professional multisource CD/USB/SD-card music player with unbalanced outputs 2 x RCA + COMBI RCA, integrated FM RDS and tuner with RS232 control, IR remote included, rack mountable. preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material) | 1 | Nos | 48,603 ₹48,603 Lowest | 53,317 ₹53,317 |
| 9.00 | Digital Networked Power Amplifier with all necessary accessories to comply the installation Supply,installation, testing & Comissioning of Class D configurable amplifier with total 600W output power or better across 4 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ; S/N Ratio > 99db and THD <.3% at rated output complete with standard accessories as required. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals, shall support remote Volume controllers (wired) for individual channels. Shall also have built in 4 channel or better Digital Audio input port Compatible with offered DSP. preferable Makes: PowerSoft/Ashly Audio/Bose (Engineer Incharge will be final for Approval of any material) | 2 | Nos | 1,61,416 ₹3,22,832 Lowest | 2,20,218 ₹4,40,436 |
| 10.00 | Supply installation testing and commisioning of Loudspeakers with Drivers 2x 10" LF / 1 x 1,4" HF Coaxial , Frequency range 60 - 18K Hz; Power capacity programm / peak:1000/2000W ; Impedance- 8 Ohm , Coverage range (h x v) 90° x 50°, rotatable HF-Horn; Sensitivity 1 W / 1 m - 106 dB,SPLmax / peak 138 dB, with Polyurea coating and IP55 preferable MAKE- TWAUDIO /BOSE/ ADAMSON/ NEXO (Engineer Incharge will be final for Approval of any material) | 4 | Nos | 4,09,941 ₹16,39,764 Lowest | 5,13,955 ₹20,55,820 |
Tender Value
₹1.5 Cr
EMD Value
₹3.1 L
Closing Date
18 May 2022, 6:00 pmClosed
ACE III RHB
Additional Chief Engineer III Rajasthan Housing Board Jyoti Nagar Jaipur
Audio system work for development of fountain square at V T road Mansarovar RHB Jaipur
2022_RHBCE_271166_2
ACE-III_02/2022-23
Open Tender
Electrical Works
Percentage
270 days
Jaipur
As per NIT
3 documents required · 3 mandatory
₹3,540
As per NIT
₹3.1 L
Yes
26 May 2022
28 Apr 2022
20 May 2022
28 Apr 2022
18 May 2022
28 Apr 2022
Amount
Digital Networked Power Amplifier with all necessary accessories to comply the installation Supply, installation, testing & Comissioning of 4 channel class D Power amplifier with a Max Output Power of 4x500W@4/8 ohms, or bridged mode output power of 2 x 500W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc. The Damping factor shall be >5000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot. Warranted for at least 5 years. preferable Makes: PowerSoft/QSC/Bose (Engineer Incharge will be final for Approval of any material)
Audio Output Interface Networked audio output expansion device with 4 line-level output channels, plus Emergency Message storage Supply, installation, testing and commissioning of networked audio output expansion device with 4 line-level output channels.The audio output device shall be designed in such a manner that provide audio and control by Layer-2 protocol . It shall have Local storage of Emergency Messages in non-volatile memory, receive Power over Ethernet (PoE) utilizing a single (CAT5) network cable to a rear panel RJ45 connector. The output device shall provide four removable terminal block connectors for linelevel audio outputs, four control inputs, and four control outputs. It shall have channel-to-channel and device-to-device failover,local non-volatile storage of Emergency Messages,dual PoE capable with alternate powering from auxiliary 24V DC supply (dual inputs), Page Active Relays, Control Inputs, and Control OutputsThe audio output device shall provide local digital audio signal processing and local storage of configuration data,signal processing including volume control, filters, compressor/limiting, delay, speaker equalization. The audio output device shall indicate signal and clip with LEDs on the front panel. preferable Makes: Biamp /Symetrix /Ashly Audio /Bose (Engineer Incharge will be final for Approval of any material)
"Message Server Enhanced Networked Messaging Processor SITC of networked messaging processor. The Playing live & Pre-recorded server shall networked based & to be rack mountable in one rack space (1RU) and shall support advanced paging functionalities such as recorded message storage and playback, system configuration storage, event scheduling, time server support, storage of logged system data, VoIP triggered paging, email notification, and remote third party control capability. The processor shall feature a status LED and separate ports for TCP/IP Control and networked based Layer-2 or above protocol . The message Server shall be CE marked and shall be compliant with the RoHS directive.preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material)
"Paging Station Emergency Wall-mounted Paging Station, 10 Buttons with hand-held microphone (EN 54-16 certified) Supply, installation, testing and commissioning of EN 54-16 certified wall-mounted paging station to provide paging audio and network control data via network cable and using PoE power from RJ-45 connector. It shall have 10 or more buttons with mutliple functions e.g .direct page ,zone recall etc. It shall provide multi level paging priorities functions and facility for override, store and forward, and keypad lock-out . It shall have inbuilt DSP ,data storage. It should have LED/LCD backlit screen, access via special code ,sutiable to work in high noise area with inbuilt noise-cancelling microphone. It shall be CE, RoHS compliant and EN 54-16 certified. preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material)
Audio Input Interface Networked audio input device with 6 channels of BGM or user configurable mic/line audio Supply, installation, testing and commissioning of networked audio input expansion device .The audio input device shall provide audio and control via networked based Layer-2 or above protocol. It shall receive Power over Ethernet (PoE). The audio input device shall provide four sets of dual RCA connectors plus removable terminal block connectors for line-level inputs, two microphone/line inputs with phantom power, four paging inputs, six Rj45 outputs, four control inputs, and four control outputs. Software-configurable local audio signal processing including gain, filters, and compressor/limiter. The input device shall indicate signal and clip with LEDs on the front panel. The input device shall be CE marked and shall be compliant with the RoHS directive. preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material)
"Audio Player Versatile DAB+ and FM RDS / CD / USB / SD-card /Bluetooth music source, RS232 control, IR remote included, 1U, 19"" Supply, installation, testing and commissioning of professional multisource CD/USB/SD-card music player with unbalanced outputs 2 x RCA + COMBI RCA, integrated FM RDS and tuner with RS232 control, IR remote included, rack mountable. preferable Makes: Biamp /Symetrix /Ashly Audio (Engineer Incharge will be final for Approval of any material)
Digital Networked Power Amplifier with all necessary accessories to comply the installation Supply,installation, testing & Comissioning of Class D configurable amplifier with total 600W output power or better across 4 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ; S/N Ratio > 99db and THD <.3% at rated output complete with standard accessories as required. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals, shall support remote Volume controllers (wired) for individual channels. Shall also have built in 4 channel or better Digital Audio input port Compatible with offered DSP. preferable Makes: PowerSoft/Ashly Audio/Bose (Engineer Incharge will be final for Approval of any material)
Supply installation testing and commisioning of Loudspeakers with Drivers 2x 10" LF / 1 x 1,4" HF Coaxial , Frequency range 60 - 18K Hz; Power capacity programm / peak:1000/2000W ; Impedance- 8 Ohm , Coverage range (h x v) 90° x 50°, rotatable HF-Horn; Sensitivity 1 W / 1 m - 106 dB,SPLmax / peak 138 dB, with Polyurea coating and IP55 preferable MAKE- TWAUDIO /BOSE/ ADAMSON/ NEXO (Engineer Incharge will be final for Approval of any material)
Supply installation testing and commisioning of flying Subwoofer with Drivers 1x 18" LF; Fequency range 32 - 160 Hz, Power capacity-programm / peak: 2400 / 4800 W ; Imopedance - 8Ohm, Sensitivity 1 W / 1 m - 96dB Passive ; SPLmax / 1 m / peak 132d, with Polyurea coating and IP55 . preferable Make:- TWAUDIO /BOSE/ ADAMSON/ NEXO (Engineer Incharge will be final for Approval of any material)
Supply , Installation, Testing and Comissioning of two Channel amplifier with inbuilt DSP, 3000W @2ohm , 2400W @4 ohm; 1250W @8ohm ; 6000W @4Ohm and 4800W@8Ohm in bridge mode; Maximum output voltage 142Vpeak and 80Apeak current; Frequency Response 20Hz-20KHz;S/N Ratio- 111dBA; Crosstalk <70dB@1Khz;THD+N < 0.1%; Slew Rate->50V/microSec; Damping Factor >500@ 20-100Hz; A/D and D/A Converters of 24bit/48KHz; DSP Inbuilt Preset Memory; Crossover Filters - linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR);Input Equalizers - Raised-cosine, custom FiR, parametric iiR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass; Output Equalizer ; Limiters - P TruePower™, RMS voltage, RMS current, Peak limiter and with speaker presets, Separate input and output DSP , DANTE input Ready preferable Make:- POWERSOFT /BOSE/ NEXO /Linearesearch (Engineer Incharge will be final for Approval of any material)
SITC of Four Channel amplifier with inbuilt DSP, 1500W @2ohm , 1500W @4 ohm; 1250W @8ohm Maximum output voltage 145Vpeak and 50Apeak current; Frequency Response 20Hz-20KHz;S/N Ratio- 108dBA; Crosstalk >70dB@1Khz;THD+N < 0.1%; Slew Rate-50V/microSec; Damping Factor >500@ 20-100Hz; A/D and D/A Converters of 24bit/48KHz; DSP Inbuilt Preset Memory; Crossover Filters - linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR);Input Equalizers - Raised-cosine, custom FiR, parametric iiR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass; Output Equalizer ; Limiters - P TruePower™, RMS voltage, RMS current, Peak limiter;and with speaker presets, Separate input and output DSP , DANTE input Ready preferable Makese:- POWERSOFT/ BOSE/ NEXO /Linearesearch (Engineer Incharge will be final for Approval of any material)
Supply, installation, testing and commissioning of12 channel analog Mixer
Supply, installation, testing and commissioning of Speaker Cable: 2 core 2.5 sq mm Armoured cable conduction loudspeaker cable.
Supply, installation, testing and commissioning of Speaker Cable: 2 core 4 sq mm Armoured cable conduction loudspeaker cable.
Supply , installation , testing and comissioning of Rack Finishing- with OFC Termination Swith all necessary accessories to comply the installation
Supply , installation , testing and comissioning of 8 x 10/100/1000T ports (POE) 4 x 100/1000x SFP Industrial L3 Switch with all necessary accessories to comply the installation
Supply , installation , testing and comissioning of 8 x 10/100/1000T ports (POE) 2 x 100/1000x SFP Combo Industrial Managed Switch
Supply , installation , testing and comissioning of 1000BaseLX SFP (10km) Swith all necessary accessories to comply the installation
Supply , installation , testing and comissioning of LIU Single Mode with Piggtail and Adapter (Patch Panel for 12 core with inbuilt pigtails) with all necessary accessories to comply the installation
Supply , installation , testing and comissioning of OFC Patchcord with all necessary accessories to comply the installation
Supply, installation, testing and commissioning of 17u Equipment Rack
Supply, installation, testing and commissioningof XLR M/F Connector,jack EP to Rc connector
M.M. Brothers
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.29 MB
gs.pdf
Tender Documents • 0.18 MB
BOQ_483132.xls
BOQ • 0.29 MB
cagr.pdf
Tender Documents • 2.66 MB
tbid.pdf
Tender Documents • 15.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .