Construction of Sub Health Center building at Kargam

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:in all kinds if soils including dewatering if any

Providing/laying of dry stone solling duly hand packed including carriage by MT as well HL

P/L in position specified grade e including curing but excluding the cost of centering and shuttering, finishig and reinforcement All work upto plinth level with 1:4:8(1cement:4coarse sand : 8graded stone agg. 40 mm size ) including all carriages by MT as well as HL of material up to site of Work Complete job.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including all carriages by MT as well as HL of material up to site of work complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including all carriages by MT as well as HL of material up to site of work complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks in superstructure above plinth level upto floor five level incl all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Mild steel and medium tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns, and truss beams

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete,40 mm thick with 20mm nominal size stone aggregate.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)incliuding all carriages of Material upto site of work complete Job by MT as well as HL

12 mm thick plaster on rough side of brick wall in 1:4 mixincliuding all carriages of Material upto site of work complete Job by MT as well as HL

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(KD Wood)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(KD wood) including cost of hardware fittings

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (KD Wood) including cost of hardware fittings

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

P/F of mild steel grills fixed to window frames inc. cost of red oxide two or more coats

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone( Nallah )incliuding all carriages of Material upto site of work complete Job by MT as well as HL

Providing and fixing of ceramic glazed wall tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 12mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x300 mm

Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade new work (Two or more coats applied @ 3.84 liter/10sqm

Painting wood work with deluxe multisurface paint of required shade.Two or morecoats applied @ 0. 901itre/1Osqm over an under coat of primer applied @ 0. 751itre/1 Osqm of approved brand and manufacture. (doors, windows, ceiling & eves boarding)

P/F of 12mm thick Plywood for ceiling i/c (30mmx30mm) woodencornice & necessary frameworks of spacing 2' x 2' of size (75mm x40mm KD Wood),complete job

Painting with synthetic enamel paint of approved quality (steel work)

P/F of Anchor bolts (40cm long)

P/F of wood work trusses/purlins/rafters/posts/orpost plates like components incluidng nails ,etc complete Poplar wood

Providing corrugatted G.S. sheet roofing i/c vertical / curved surface fixed with polymer coated j or l hooks .bolts and nuts 8mm dia, with bitumen and G.I. limpet washer .0.63mm thick with zinc coating not less than 275gm/sqm

Providing ridges and hips of width 60cm overall width plain G.S. sheets fixed with polymer coated j or l hookbolts and nuts 8mm dia, with bitumen and G.I. limpet washet complete

Providing and fixing plained eaves boarding 2nd class KD wood. 225x30 mm (nominal size )

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing aluminium work for doors windows ,ventilators and partition walls with extruded built up standard tubular sections and other section of approved make and fixed with dash fasterner of required dia and size incluidng necessary filling up gaps at junctions with required EPDM rubber/neoprene gasket felt etc .incluidng cleats,aluminium snap beading for glazing and panelling ,CP brass stainless steel screws all complete (powder coated aluminium )

P/F of 12mm thick prelaminated particle board or graded wood particle board or 5mm thick float glass pans in panels fixed in door and partition frames

Add for Sanitary and electrification items(copmplete job ).(20 no. of lighting points, 08 heating points, 04 fan points , 10-40Amp =16no.MCB , 01 triple layer storage tank of capacity 1000 litre ,01 india type water closet with flushing cistern,02 wash basin, 02 No. 15 mm nominal bore C.P. brass long body bib cock , . 1No.Basin mixer & Wall mixer of approved quality conforming to IS standards and weighing not less than 690 gms and and other fittings complete. (Note:- all sanitary fittings to be done in PPR of approved brand like Pilsa/Vectus /supreme with approved SDR ratio and other specifications)

Providing and fixing of Community Inforamtion board (CIB)

RAYN CONSTRUCTIONS

M/S AB RASHID PEER

ZUBAIR AHMAD KHAN

NISAR AHMAD WAR

GH AHMAD GANAI

REYAZ AHMAD HANJI