PERIODICAL SERVICES TO EXTERNAL SURFACES OF CERTAIN BUILDINGS, FENCING POSTS AND COMPOUND WALLS OF AIRFORCE STATION PUNE UNDER AGE BR-I OF GE (AF) LOHEGAON

Amount

M&L for preparation of existing steel surface of any description over 10cm in width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L for preparation of existing steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of existing steel surface of any description over 10cm in width or girth and applying one coat of Aluminium paint complete all as specified and directed.

M&L for preparation of existing steel surface of any description over 10cm in width or girth by complete removal of existing finishes and corrosion by using Emery paper and applying two coat of Aluminium paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered wall surface of any description and applying one coat of cement based paint complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applying two coat of cement based paint complete all as specified and as directed.

M&L for preparing of old painted surface of brick work, concrete plastered or unplastered surface and applying one coat of Acrylic smooth exterior paint of required shade, approved colour or pattern complete all as specified and directed.

M&L for preparing of old painted surface of brick work, concrete plastered or unplastered surface and applying two coats of Acrylic smooth exterior paint of required shade, approved colour or pattern complete all as specified and directed.

M&L for Obliteration of existing road marking by removing of old paint by paint removers in paving / premix bitumen or concrete surfaces n exc 10 cm width and applying two coat of road marking paint (Water based) of white colour complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and as directed).

Dismantling floor, hearth or wall tiling including wall cement mortar bedding (But not backing ) and rubbish of premises complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Dismantling Asbestos cement /Steel/ fibre (Corrugated , semicorrugated ,etc) sheets in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping ,mass concrete complete all as specified and directed.

M&L 15mm thick cement plaster on other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed using wpc.

M&L 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick/ concrete surfaces of walls , finished even & fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surface of any description and applying two coat of Oil bound destemper over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.

S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M & L Cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F Rolled mild steel in Compound girders and stanchions, lattic girders,posts, staging for water tamks and the like including caps, bases,splices etx. Builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W(grade E-250) quality 'A' all as directed and specified.

Mild steel screw bolts of ength of bolt n.exc 5cm long, diameter of neck 11 to 15mm (machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S&F galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screw complete all as specified and directed.

S&F galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screw complete all as specified and directed.

M & L 25mm thick PCC (1:2:4) type B-1 using 20mm graded agg as in sub floors, sub-bases, floors and pavings etc. complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in flooring , sub bases etc complete all as specified and directed.

M&L for vitrified ceramic tiles Dark shade 10mm thick (square/rectangular ) polished ,area of each tiles not exceeding 0.36sqm in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floors ,plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green all complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and directed.

Dismantling stone slabs or roof treatment of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 Kg ( and of cement per Sq.meter. complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work finished even and smooth without using extra cement in cement mortar 1: 3 with water proofing compound all as per specification complete all as specified and directed. Qty of Liquid water proofing compound will be measured and paid seperately.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for priming surfaces in moderate conditions for laying APP membrane complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including applying two coats of bituminous aluminium paint, complete all as specified and directed.

SHIVLING ENTERPRISES

THE SAIRAM CONSTRUCTIONS