REPAIR/ MAINT OF PUMPING SETS OF WATER SUPPLY INSTALLATION AND OTHER CONNECTED WORKS INCLUDING PIPE LINES AND REPAIR/MAINT TO B/R AND E/M WORK IN AIR CONDITIONING MES INSTALLATIONS AT AF STN BKT

M&L for dismantling of submersible pumping set of capacity 1 HP to 3 HP installed at various location in (AF) Stn BKT , and carrying out necessary repairs to pump and motor, reassembling after replacement of Bowels, impellers, thrust bearing plate, sand gaurd, submersible cable upto 6 mtr length, bushes, refilling/remetalling of motor shaft, nut bolts etc complete all as specified and directed and testing to entire satisfaction of EIC. (Note:- 1. All Spare parts required will be included in quoted rate except rewinding of motor. 2. Cost of Transportation (if required) shall be included in quoted rate.)

All as per the item No 145.00 herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet complete all as specified and directed

M&L for dismantling of submersible pumping set of capacity 15 HP to 30 HP installed at various location in (AF) Stn BKT , and carrying out necessary repairs to pump and motor, painting of pumping set, reassembling after replacement of following items & jobs and testing to entire satisfaction of EIC. (Note:- 1. Spare parts required will be measured & paid separately here in after. 2. Cost of Transportation (if required) shall be included in quoted rate)

Supply & replacement ball bearing No 6201/6202 for ceiling fan/exhaust fan including taking out old & UNSV complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Thurst bearing block complete of submersible motor.

Labour only Cutting out the existing winding from stator of submersible motor against item No 1, M&L for rewinding of submersible motor with existing size of copper wire including varnishing etc complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Remetaling of motor shaft, turning to bring it to original size and shape and polishing for submersible motor complete all as specified and directed.

One 3 pin 5 amps socket point on same board complete all as specified and directed

Supply only for replacement against item No 3.00 here in before Bowel bushes complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Neck ring complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Distant pieces complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Steel impeller complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Bowel complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before NRV complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Pump shaft complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Inlet body complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Slot wedges complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Cable jointing by using puncture compound roll and tape/ sealing compound complete all as specified and directed.

M & L for taking out / lifting from bore well submersible pump set of 15 to 30 HP capacity from bore well including column pipe and connection cable, fitting through providing tripod assembly with chain pully in different locations of bore well and dismantling of cable, pumpset etc complete all as specified and directed.

M & L for lowering of Pumpset any size of capacity 15 to 30 HP with existing column pipe including replacement of rubber packing and jointing cable & lowering and testing of Pump set for satisfactory run complete all as specified and directed with column pipe.

M & L for taking out submersible pump set of 1 HP to 3 HP capacity from bore well including column pipe and connection cable, fitting through providing tripod assembly with chain pully in different locations of bore well and dismantling of cable, pumpset etc complete all as specified and directed.

M & L for lowering of Pumpset any size of capacity 1 HP to 3 HP with existing column pipe including jointing cable & lowering and testing of Pump set for satisfactory run complete all as specified and directed. with column pipe.

M & L for replacement of submersible cable PVC insulated, overall PVC sheathed, flat 10 Sqmm 3 core with copper conductor multistranded complete all as specified and directed.

Labour only Cutting out the existing winding of stator of submersible motor of 15 to 30 HP, three phase and M&L for rewinding with PVC copper wire of existing size complete including varnishing, supply & replacement of minor items like cable grommet, water seal, studs with nuts, sand guard, sleeves in end plates, submersible cable upto 6 mtr length, straightening of the slot etc complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Bushes of submersible motor as per manufacture’s design and specification.

S&F in replacement of PVC insulated copper conductor multistrand submersible flat cable 4 sqmm cross sectional area, 3 core including jointing and testing complete all as specified and directed.

Supply only for replacement against item No 3.00 here in before Coupling of submersible motor and pump with key complete all as specified and directed.

Supply only TCC-90 complete all as specified and directed.

M & L for replacement of sluice valve of dia 150 mm bore (ISI marked) PN 1.6 with new for distribution, rising main, wash out purpose to fix in pipe line complete with nut bolts, washers and rubber packing etc complete all as specified and directed.

All as per Item No. 30 above but 100 mm bore

S&F (in replacement) pressure booster pump set Electric driven of capacity 0.5 HP single phase 230Volts,50Hz AC complete with pressure gauge, pressure switch, NRV and other connecting accessories etc complete all as specified & directed. Make :- Kirloskar/ CG/ KSB/ V Guard or equivalent

S&F (in replacement) of monoblock pump set of capacity 1 HP single phase 230Volts, 50Hz AC complete with connecting accessories etc complete all as specified & directed. Make: Kirloskar/ CG/KSB or equivalent

Supply & testing with orthodine solution (in 500 ml pack), complete all as approved & directed by Engineer-in-Charge.

Supply & lowering 100 mm dia heavy grade MS pipe flange type including all fittings and fixtures along with lifting of old unserviceable complete all as specified & directed. Make: Jindal, Tata or equivalent

Supply & lowering UPVC column pipes of size 32/35 mm dia including all fittings and fixtures along with lifting of old unserviceable complete all as specified & directed.

S&F packing of size 100 mm bore 3 mm thick for column pipe complete all as specified & directed.

M&L for nut, bolt with washer of different sizes complete all as specified & directed.

S&F Heavy duty PVC coated stainless steel wire of size 4 mm dia suitable for holding the submersible motor of capacity upto 3 HP complete all as specified and directed.

M & L for gland filling of Sluice Valves/Pumps complete all as directed and specified by EIC

Material, labour and T&P for carrying out Yield test of the existing bore wells located in various locations in tech and domestic area at AF stn BKT, by any method and by well experienced mechanic alongwith calibrated machines/ equipments including lifting/lowering of pumping set (if required) any T&P, labour and material required for fixing testing eqpts etc. Borewells size upto 300 mm and depth 150 mtr (appx), delivery line upto 150 mm. Yield test report shall be prepared and submitted all as specified and directed.

M & L for checking of minor repair, leakage of decrin dozer fortnightly or as and when required located at different location of pump house 8,9,10,11, 7 and 358 TRU located in AF Stn BKT of any capacity & make and testing complete all as specified and directed to deliver recommended qty of chlorination.

M&L for taking down unserviceable pump tube of decrin dozer installed at various pump houses at BKT and replacing with new pump tube of existing make and model complete all as specified and directed.

Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 200/250 mm complete all as specified and directed. Make: Havells/philips/bajaj or equivalent

Supply only for replacement against item No 3.00 here in before Complete overhauling of submersible pump

All as item No 43 above but Injection check valve 3/8" of existing make and model complete all as specified and directed.

All as item No 43 above but Suction/discharge tube of size 3/8" of existing make and model complete all as specified and directed.

All as item No 43 above but Weighted suction line strainer of size 3/8" of existing make and model complete all as specified and directed.

All as item No 43 above but Repairing and rewinding of Strainer motor complete

Supply and fixing (in replacement) DOL starter complete fitted with Voltmeter and Amperemeter suitable for 1 HP single phase submersible pump set complete all as specified and directed. Make : Havells/C&S/Kirloskar or equivalent

Supply and fixing (in replacement) Electronic Fully Automatic star delta starter complete fitted with Voltmeter and Amperemeter suitable for 25-30 HP Three phase submersible pump set complete all as specified and directed. Make: Havells/L&K/Crompton or equivalent

Supply, lowering, jointing and fixing in position UPVC casing pipe 110 mm nominal dia of minimum 6.0 mm wall thickness and conforming to latest IS: 12818 with all fitting and fixtures upto depth of bore well complete all as specified and directed. Note:- Effective length shall only be measured and paid.

Supply & Fixing of PVC well cap of 100mm nominal PVC housing pipe on top end of casing pipe, last pieces left above the ground including locking arrangement complete all as specified and directed.

S&F (in replacement) submersible pump set electric driven of capacity 1 HP, single phase 230 Volts, 50 Hz AC having 25/32/40 mm delivery size directly coupled to including DOL starter of suitable capacity with necessary fixing arrangement complete all as specified & directed. Make :- Kirloskar/ CG/KSB or equivalent.

S&F submersible cable 2.5 Sqmm 3 core copper conductor with suitable clips for 1 HP submersible pumpset complete all as specified and directed.

M&L for over pumping by minimum 1.5 HP pumpset till clear water (min 10 -15 hrs) is obtained complete all as specified and directed.

M&L for coarse river sand filling over floors or in foundations complete all as specified and directed.

M&L for replacement of contactor 3 phase suitable for 15/25 HP submersible pumpset in star delta starter complete all as specified and directed.

M&L in repair for single phase preventor in star delta starter complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide & not exceeding 1.5 mtr deep for laying pipe lines etc & getting out in soft /loose soil including forming bottom surface to required level or slope complete all as specified and directed by EIC.

Returning, filling in trenches (Soft/Loose soil) in layers not exceeding 25 cm thick after laying of pipe including spreading, levelling & well ramming including watering as required all as specified and directed by EIC.

Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point all as specified and directed by EIC.

M&L for GI tubing 15 mm dia bore medium grade complete with all fitting laid in trench or fix on wall/floor including taking up or down old u/s steel tubing and connection complete all as specified and directed.

All as item No 43 above but Shaft with Impeller for strainer motor of existing make and model complete all as directed.

All as item No 43 above but Rollar assembly of existing make and model complete all as directed.

All as per Item No 63 above but 20 mm dia bore

All as per Item No 63 above but 25 mm dia bore

Supply & Laying Ductile iron pipes single socket including special class "K-7 with spigot and socket ends centrifugally in any length laid in trenches for 100 mm dia bore sizes including taking down old us CI/DI pipe complete all as specified and directed.

All as per Item No 63 above but 50 mm dia bore

Chemical and bacteriological testing of water sample from approved laboratory to ensure potability of water Note:- 1. Water sample will be collected in sealed container from pump houses and various locations at AF Stn BKT directed by Engr-in-Charge.

80mm bore (Nominal bore)

50/40mm bore (Nominal bore)

25mm bore (Nominal bore)

20mm bore (Nominal bore)

M&L for cutting of road ( in hard/dense soil) for laying of CI/DI/GI Pipe line of any size upto 1.2 mtr depth and getting out including forming bottom surface to required level or slope & making good the road as per existing all as specified and directed by EIC.

Supply and fixing gun metal globe or gate valve with iron wheel head screwed both end for GI pipe and fixed in 15 mm dia bore complete all as specified and directed

All as per Item No 68 above but of 150 mm dia bore complete all as specified and directed.

All as per Item No 63 above but 80 mm dia bore

All as per item no. 73 above but 25mm dia bore complete all as specified and directed.

Supply only high strength Calcium based granular disinfection chemical (Chlorine content not less 60%) containing corrosion inhibitors & anti scalants (CIAS) for water treatment complete all as specified and directed.

150 mm bore

100 mm bore

80 mm bore

S & F cast iron body heavy duty Non Return Valve (NRV), 150mm dia, ISI marked, both ends flanged with 2 Nos rubbers insertion gasket joints, nuts, bolts and washers of required size and Nos complete including removing of old unserviceable one, complete all as specified and as directed.

S & F cast iron body heavy duty Non Return Valve (NRV), 100mm dia, ISI marked, both ends flanged with 2 Nos rubbers insertion gasket joints, nuts, bolts and washers of required size and Nos complete including removing of old unserviceable one, complete all as specified and as directed.

M & L for painting of valve pit / chamber cover made of MS sheet cover complete all as directed and specified by EIC

Taking up or down existing GI steel water tubing of any grade including all fittings and accessories from trenches/open surfaces, including cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , including new GI fittings and accessories as required in new or old position complete all as specified and directed of the following size :- Note: Necessary earth work shall be measured and paid separately.

Supply & Fixing & testing DI/CI Fittings any size, such as bends(any type, radius & angle) tappers any type (Straight, bend, increasing, decreasing or double socket or both end flanged etc) Tee pieces, single branch 'Y' junction double branch, cross (all socket or spigot & socket or both end flanged), collars, caps, connecting piece and plugs complete all as specified and directed by EIC.

All as per item no. 73 above but 20 mm dia bore complete all as specified and directed.

All as per item no. 73 above but 50mm dia bore complete all as specified and directed.

Taking up or down existing CI/DI water tubing of size 100/150 mm dia bore of any grade including all fittings and accessories from trenches/open surfaces, including cleaning, cutting, welding work, jointing with new material etc as required and re-fixing the same after necessary repair works, etc as required in new or old position including necessary earth work complete all as specified and directed. Note: Any new fitting required shall be measured and paid separately.

M&L for CI flange Joint with rubber or fibre board gasket suitable for 100/150mm bore CI pipe complete all as specified and directed

M&L for D joint complete with all accessories suitable for 150 mm bore pipe line complete all as specified and directed

M&L for D joint complete with all accessories suitable for 100 mm bore pipe line complete all as specified and directed

M&L for D joint complete with all accessories suitable for 80 mm bore pipe line complete all as specified and directed

M&L for nut and bolt of different sizes as per requirement complete all as specified and directed

Supply, installation, fixing, jointing and testing, ISI Marked, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, jointed on both ends with and including rubber gasket joints, nut, bolts & washers and taking down old us and tested of following size.

All as per item No 83 above but 32 to 80 mm bore GI pipe complete all as specified and directed.

M & L for replacement of existing water leakage/ line blockage/gate valve blockage etc on 15 mm to 25 mm bore GI pipe line in any buildings at (AF stn BKT) including replacement of cracked/ broken nipple/ elbow/ union/ long screw if required to make leak proof complete including threading/ cutting/welding of pipe as required at site to ensure smooth water supply including arrangement and excavation & earth work if any all as specified and directed.

M&L for replacement to CI sluice valve with flanged ends, cast iron body flanged and drilled end non rising type including replacement of brass spindle with nuts, gland cap, CI wheel suitable for 80 mm bore, rubber gasket ,bolts and nuts ,washers etc. complete all as specified and directed

For 50,000 gallon Overhead tank

For 22,000 gallon Overhead tank

For 10,000 gallon Overhead tank

For 5,000 gallon Overhead tank

Supply, fixing, testing and commissioning Electronic water level indicator device (Sensor system with LED Display) 10 level showing water level in cm/meter (before overflow) as per predetermined limits and power failure, complete with all accessories all as specified and directed by Engr-in-Charge.

All as per item no. 91 above but for bore 100 mm complete all as specified and directed.

All as per item no. 91 here in before but for bore 150 mm complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 Volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 Sqmm, 2 core nominal cross section in service connections, complete all as specified and as directed.

Supply and fixing of thermoplastic cable junction box including one MCB single pole 6 Amp, 240 Volts, 10 kA, 'B' curve mounted on DIN rail and connected all the incoming and outgoing terminals with lugs, complete all as specified and directed.

Supply only Alum superior quality white colors complete all as specified and directed.

M&L for valve pit brick masonry chamber of size 900x900x900 mm (internal dimension) with MS plate 1.6 mm thick top cover arrangement 50x50x6 mm angle iron with lock - 01 No including painting with two coat of synthetic enamel paint over a coat of red oxide primer including excavation earth work, PCC plaster and dismantling of old pit etc complete all as specified and directed.

Per 10 Nos (Per CM of ht)

Taking out lead from leaked joints and making new lead joint by old retrieved lead and extra lead required including spun yarn, cocking etc complete all as specified and directed

M&L for applying 1 mm thick wall care putty in two layers white wall care putty on walls complete all as specified and directed.

Complete removal or existing treatment on wall/roof projections including fa

scia cornices etc by scrapping with mechanical sander (having mechanical vaccum machine, scruber) with sanding pad adjustable size according to high of building of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed. Note: Contractor shall ensured that all deployed labour's on operations, like painting & misc building repairs & maintenance work, electricity subjected repairs & installation and its testing related have to maintained according to CA & related regulated other agency norms as followed, No extra demand will be occurred on department on this account.

M&L for cleaning of RCC over head tanks (installed on staging) comprising of the following operations :- (a) Dewatering of the tank shall be carried with gravitational flow. (b) Removal of left over dirty water and sludge with suitable sludge removal pump. (c) Cleaning of internal walls, floor, ceiling of tank shall be carried out by high pressure water jet. Pressure of machine shall not be less than 80-120 bar and ensure that no dirt, algae or moss remain on surface of tank. (d) Remaining sludge shall be removed from the floor with the help of industrial vacuum cleaner. (e) Tank shall be sterilized by spraying anti bacterial agent using same high pressure machine. (f) Date of cleaning and capacity of tank will be written on OHT with synthetic enamel paint. Cleaning will be done for following capacity RCC overhead tanks:-

M &L for preparing of newly putty surfaces of finishing walls with paint of required shade applying two or more coats of 100% Premium acrylic exterior emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm on putty surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) (Make:- Asian Paint Apex Ultima/Berger Weather Coat Long Life 10/Nerolac Excel Everlast or equivalent.)

M &L for preparing of old painted surfaces of walls with paint of required shade applying one coat of 100% Premium acrylic exterior emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means)

M&L for preparation of newly putty surfaces of wall by washing rubbing down and stopping and applying two coats of acrylic distemper (Oil emulsion any tint ready mixed Ist quality) having VOC content less than 50 gm/litre on wall by air less spray machine (Mechanical means) complete all as specified and directed

M&L for preparation of newly putty surfaces of walls and applying two or more coats of 100% premium acrylic emulsion in Camouflaging tri or other pattern having VOC less than 50gm/Ltr and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @0.9 ltr/10sqm over new by prepare surface and height upto 9 meter complete all as specified and as directed by Engineer-in-Charge. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means)

M&L for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion in Camouflaging tri or other pattern having VOC less than 50gm/Ltr and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and height upto 9 meter complete all as specified and as directed by Engineer-in-Charge. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means)

M&L for preparation of old distempered surfaces and making good uneven surfaces with plaster of Paris putty where ever required of finishing walls by washing rubbing down and stopping of old distempered surface of wall including cornices etc and applying one coat of acrylic distemper (Oil emulsion any tint) on wall by air less spray machine (Mechanical means) complete all as specified and directed.

M&L for preparation of old plastered or unplastered decorated surface of walls and making good uneven surfaces with plaster of Paris putty where ever required of finishing and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distemper and painted surfaces & applying two coats of distemper oil emulsion over a thin layer of wall care putty complete all as specified and directed.

Supply and fixing in replacement of capacitor 2.5 mfd complete all as specified and approved by EIC. Make- EPCOS/Havells/M-CAP.

M&L for preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of white wash by air less spray machine (Mechanical means) of any shade and with appropriate binder fevicol or equivalent complete all as specified and directed

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including grill, jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed.

S&F prelaminated particle board 9 mm thick, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.

S&F in repair aluminium 2 lever mortice Lock with all fittings for aluminium door complete all as specified and directed.

Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel, Aluminium or wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick plain sheet glass ordinary quality and glazing with oil putty pins/spring pins upto 9.50m height in steel/Aluminium/wooden shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed.

S&F in replacement of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. (Make -Sandhu/Hardwyn/Droma).

M&L for preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of white wash by air less spray machine (Mechanical means) of any shade and with appropriate binder fevicol or equivalent complete all as specified and directed

M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down existing aluminium doors/windows shutter with frame area not exceeding 2 Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete. Note : Aluminium parts will be measured and paid separately.

Demolition of cement concrete of any description and in any position and removing demolish material to 1.5 Km away from Defence land all as specified and directed by EIC.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with thick paint, complete all as specified and directed.

M&L for machine cut Kota stone slab (Minimum size shall be 550x550 mm) flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete in patches all as specified & directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed

M&L for Mirror polishing of old Kota stone flooring including pointing in colour cement to match as per desired satisfaction of Engr-in-Charge all as specified & directed.

S&F in replacement of PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

M&L for machine cut Kota stone 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, as in riser of steps,skirting,dado & other vertical surfaces complete all as specified & directed.

M &L for half rounding to edges of Kota & granite slabs one edge such as in steps, cooking platform, and other similar locations etc.complete all as specified & directed.

M&L for 15mm thick rendering on brick work in cement mortar 1:6 and finished even and smooth without using extra cement Mechanical Means all as specified and directed (Note:- Below 10 Sqm Qty be executed through conventional method).

M&L for modular metal flush boxes and white cover plate with frame of size 6/8 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 4 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed . Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

M&L for modular metal flush boxes and white cover plate with frame of size 1/2 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

S&F in replacement of vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fasteners complete all as specified and directed.

Refixing of serviceable light fittings upto 22 watt obtained form item No 1 including connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified.

M&L for preparation of old plastered or unplastered decorated surface of walls and applying one coat of cement base

paint by air less spray machine (Mechanical means) of any colour complete all as specified and directed.

One light/fan point controlled by one switch SP 5 Amps, 240 V complete all as specified and directed

S & F 48 W LED aviation obstruction light on OH tank with all necessary connections, complete all as specified and directed.

S&F switch modular

type 1 module single pole, one way 5 Amps complete all as specified and directed. Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

S&F switch modular type 1 module single pole, one way 15 Amps complete all as specified and directed Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

S&F socket outlet 2 in 1, 5 pin, 15 Amps modular type 2 module complete all as specified and directed. Make- Goldmedal/Cabtree(Havells)/L&T or equivalent

M&L ceiling rose,PVC/polycarbonate, isolated body complete all as specified and directed

S&F socket outlet 5 Amps modular type 2 module complete all as specified and directed Make-Goldmedal/Cabtree(Havells)/L&T or equivalent

M&L for taking down carefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 12 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after completion of job with making good the disturbed surface to match the existing one all as specified and directed.

S&F stepped type electronic fan regulator modular type 1 module Make-Goldmedal/Cabtree(Havells)/L&T or equivalent

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. Note- (i) Dismantled serviceable light fitting should be kept in safe custody for reuse. (ii) Refixing of serviceable fitting shall be paid seperately under relevant items-

Supply and fixing in replacement of fan blade set suitable for 1200 mm sweep fan with accessories complete all as specified & directed.

Supply and Fixing in repair wall/surface mounting luminaires integrated LED Batten18/20 W, 6500/4000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge . Make : Havells / Bajaj / Phillips or equivalent .

M&L for exhaust fan louvers made out of mild steel suitable for exhaust fan of size 300mm sweep including taking down old complete all as specified and approved by EIC.

Supply, laying, fixing and testing of solid PVC insulated individual shielded for interference rejection, armoured PVC sheathed 1100 volts grade 0.25 Sqmm of 10 pairs instrumental cable used for water level indicator, ISI marked, laid in trenches/ floors or fixed on walls/ on poles, in ducts, in GI pipes on cleatews/ saddles etc. complete all as specified and directed.

Supply and fixing in repair ceiling fan motor copper winding complete suitable for 1200 mm sweep ceiling fan all as specified and directed by E-in-Charge.

Supply & replacement of Gun metal bush for ceiling fan/Pedestal an/Air circulator/wall fan etc including dismantling complete all as specified and approved by EIC.

One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed