EXTENSION OF STAFF ROOM 1ST FLOOR WITH STAIR CASE IN SAINIK SCHOOL AT AMARAVATHI NAGAR UNDER GE WELLINGTON

Amount

Demolition of Concrete such as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil all as specified and directed.

Plain Cement Concrete Type D2, 1:4:8 using 40 mm graded granite stone aggregate in foundations, sunken floor filling and mass concrete all as specified and directed.

Reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Use and waste of formwork to sides of rough finished concrete foundations, foootings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

Reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate for columns, etc, complete all as specified and directed

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface of concrete complete all as specified and directed.

Reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate for Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified.

Use and waste of form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc alos splays between floors, and beams,etc compelte all as specified and as directed.

Reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate for Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres etc compelte all as specified and directed.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges,etc compelte all as specified and directed.

Reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like compelte all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick column, beam etc (Horizontal or sloping) rough finished all as specified and directed.

Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills,concrete railings, opeinings in concrete walls, floors and roofs not exceeding 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and smimilar work all exceeeding 10cm wide and not exceeding 20cm wide with rough finished surfaces all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers, binders, etc complete all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Mild Steel work in fasteners, holdfast, straps and windties etc complete all as specified and directed.

Rendering 10mm thick cement plaster in cement mortar 1:4 on top of roof slab/ sunken floor with WPC all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

Roof treatment with following specification completely, complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of bitumen primer @ 1.2 kg/ sqm. (ii) Laying APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/front fascia. (iii) Cleaning & preparing the surfaces and finally painted at the top with a coat of bituminous aluminium paint all as specified and as Directed

Sunken treatment with following specification completely, complete all as specified and as directed. (i) Applying evenly a tack coat of bitumen primer @ 1.2 kg/ sqm. (ii) Laying APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/ front fascia.

Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or morerebates including joining cleat forfixing etc. complete all as specified and as directed.

Anodised aluminium window and ventilator shutters, side hung type 3 track sliding without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiu snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed

Plain cement concrete 1:2:4 Type B1 (Using 25mm graded aggregate as in coving/ coping/ haunching/ platform etc complete all as specified and directed

40mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in flooring all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Precast cement concrete solid block masonary with solid blocks using PCC 1:3:6 type C1 using 20mm graded stone aggregate not exceeding 10cm in width and setting in cement mortar 1:4 etc complete all as specified and directed.

Rendering 10mm thick on fair faces of brick/concrete surface in cement mortar 1:6 all as specified and as directed

External rendering 5mm thick in cement mortar 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in cement mortar 1:6 over brick or concrete surfaces finished even and fair all as specified and directed

Rendering to ceiling in 5mm thick on fair faces concrete surface and exposed concrete surfaces in cement mortar 1:3 complete all as specified and directed.

Ceramic coloured tiles, Non skid, area of each tile exceeding 0.18sqm and not exceeding 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in cement mortar 1:4 all as specified and directed.

All as per item No 32 hereinbefore, but on vertical surfaces including 10mm thick cement mortar 1:3 as in baking coat of dado/ skirting all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:3 on fair face of brick or concrete surface complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Prelaminated particle board 18mm thick, exterior grade, prelaminated both side and lipping with decorative choice lamination, fixed with screws to timber/ Aluminium frame work as in door/ modular work station, writing table, partition, counter top etc including necessary rubber beadings, bushes, telescopic channel, self closing hinges etc. all as specified and directed.

12mm Medium density fibre board, exterior grade with decorative on both sides & lipping fixed to timber framework with screwsto timber/ Aluminium frame work as in door/ modular work station, writing table, partition,counter top including necessary rubber beadings, bushes, telescopic channel, self closing hinges etc. all as specified and directed.

Supply and fix of 125mm extruded brass/cp handle fabricated type complete all as specified and directed.

Supply and fix 40mm wide continuous/piano hinges of brass in modular work station/ cupboard shutter etc all as specified and directed.

Stairs (framed) including stringers, treates, landing, balusters, hand rails etc including cleats, brackets etc similar work conforming Fe-410 (Grade E-250) complete all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Ground or frosted 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Plain sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Plain sheet glass 4.0mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sq.m in each pane complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 100 mm size complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section 150 mm length complete all as specified and directed.

Extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and directed.

Vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover, trap and connection to drain and flush pipe complete all as specified and directed.

PVC flushing cistern, 10 ltr capacity, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Vitreous china wash basin, white, flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe all as specified and as directed

PVC Connections 15mm size with PTMT nuts of length 750mm all as specified and as directed

Bib tap 15mm dia, long body, cast copper alloy, fancy type chromium plated for kitchen sink screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

Pillar taps, 15mm, fancy type, cast copper alloy with capsten heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed all as specified and as directed.

Stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated, 15mm bore all as specified and as directed

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

20mm bore unplasticised PVC pipes including fittings of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

15mm bore unplasticised PVC pipes including fittings of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

20mm dia Gunmetal, globe or gate valves fixed (half turn type or wheel type), screwed both ends for iron pipe all as specified and directed.

Rotational moulded polyethylene water storage tank, ISI marked three layer (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20mm (minimum weight 15mm -142gms) all as specified and directed.

supply and fix in 20 mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete as as specified and as directed.

Harrison rails of anodised aluminium alloy fixing with brackets, stops, rollers etc all as specified and directed

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed.

110mm bore,PVC (SWR) Tee any radius, fitted with oval access door all as specified and directed.

PVC (SWR) bends any radius, 110mm bore all as specified and directed.

PVC (SWR) bends 110mm any radius, with access door complete all as specified and directed

PVC (SWR) vent cowl 110mm dia bore of pipe complete all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches, walls or in floors all as specified and as directed.

PVC (SWR) 75mm bore pipes single socketed, in any length, fixed to walls/ laid in floors all as specified and as directed.

75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Provision of an ergonomically designed high back executive revolving chair with high density moulded foam seat, upholstered with specially developed low piling permeable upholstery, mesh back with head rest,adjustable arms,user friendly bio syncro mechanism , one position locking system and hydro pneumatic system for easy height adjustment with five prongs nylon base with premium quality nylon castors all as specified and directed. Make: Methodex Model Strom HB or equivalent in Durian/ Bluwud/ Nilkamal

Provision of an ergonomically designed low back executive revolving chair with high density moulded foam seat, upholstered with specially developed low piling permeable upholstery, mesh back with head rest,adjustable arms,user friendly push back mechanism, PP Arms and hydro pneumatic system for easy height adjustment with five prongs nylon base with premium quality nylon castors all as specified and directed. Make: Methodex Model Strom HB or equivalent in Durian/ Bluwud/ Nilkamal

Applying three coats of white wash on ceiling surfaces including preparation complete all as specified and as directed

Applying oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of ceiling complete all as specified and directed

Applying oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.

Applying oil bound distempering two coats over a coat of alkali resistant priming paint over a coat of 3mm putty in two layer including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.

Applying one coat of primer over preparation of new plastered wall surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new wall surfaces complete all as specified and directed.

Applying one coat of primer over preparation of new plastered ceiling surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new ceiling surfaces complete all as specified and directed.

Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Vitreous china urinal partition white of size 310x700 mm and complete all as specified and directed

Brass chromium plated bottle trap 32 mm for wash basins with inlet and outlet screwd for pipe or connections including necessary packing, union and cap all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as specified and directed.

Vitreous China urinal, half stall type complete including waste pipe, flush pipe and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed complete all as specified and directed

Surface dressing not exceeding 15 cm deep in soft/ loose soil all as specified and directed.

Hardcore of broken stone gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

Cement concrete type D- 2, 1:4:8 (20mm graded aggregate) 100mm thickness as in sub base complete all as specified and directed.

Chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments & incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar 1:4 complete all as specified.complete all as specified

Removing excavated soil/ material to a distance exceeeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints without grooves (thickness of joints except at sharp curve shall not to more making drainage opening wherever required complete all as specified and directed.

PCC 1:2:4 B1 (20mm graded aggregate) 100mm thick for paving, etc all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick using soils all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as in soils all as specified and directed.

Supply and laying in trenches galvanised steel tubings of bore 25 mm dia medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. all as specified and directed

Ball brass valves high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of dia 25mm all as specified and directed.

Cutting the existing GI pipe line of 25 mm dia and making Tee connection with inserting TEE of size 25 x 25 x 25 mm complete all as specified and directed.

Gun metal globe or gate valve, heavy duty conforming to IS-778 with iron wheel head screwed both ends suitable for fixing to G I pipe of size 25 mm bore complete all as specified and directed.

Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan/fan point controlled by one switch 5Amps SP all as specified and directed. Note :1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 104 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 104 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 240V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Metal Flush Box 1/2 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

MODULAR White cover plate with frame, 2 module all as specified and directed.

MODULAR White cover plate with frame, 3 module all as specified and directed.

MODULAR White cover plate with frame, 4 module all as specified and directed.

MODULAR White cover plate with frame, 6 module all as specified and directed.

Modular Fan Step regulator 120W-2 module suitable fan 48"/56" mm sweep all as specified and directed.

Supply and fix ceiling fans complete with blades, down rods, and accessories, 230V, 1400 mm sweep min air delivery 245 CFM with service value 6.BEE, five star rated with brushless direct current motor (BLDC) connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to ceiling fan all as specified and directed.

Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 300m sweep with, blades, frame and louvers shutter, voltage 230V, 50Hz, copper winding, connecting up including provn of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan all as specified and directed.

DBs with MCBs and Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

DBs with MCBs and Supply and fix MCB DB SPN 12 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

240V, 10KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connection testing and commissioning all as specified and directed.

All as per item No 125 hereinbefore but SPN 230V 32Amps capacity all as specified and directed.

Supply and fix 20W LED batten light LUM output 2000 CCT 6500K size 115 x 2.5 x 3.5 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serated milky white diffuser gets glare free, smooth ligth distribution lamp colour white all as specified and directed. Make: Panasonic Product Code PBTM06247 or equivalent in Philips / Bajaj

Supply and fix 10W LED batten light LUM output 2000 CCT 6500K size 59 x 2.2 x 3.4 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serated milky white diffuser gets glare free, smooth ligth distribution lamp colour white all as specified and directed. Make: Panasonic Product Code PBTM01107 or equivalent in Philips / Bajaj

Emergency LED bulb operating voltage 120-300 V AC IP 20 wattage 9 CCT 6500K lumen output 900 (Main) 350 (Battery) 4hr backup B-22 holder type all as specified and directed. Make: Panasonic Product code- PBUM13097/ Philips/ Bajaj.

Lamp holder angular type, PVC/Polycarbonate type with base plate /PVC box ISI marked suitable to batten fittings of 230 V. all as specified and directed.

Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c, funnel, watering pipe etc. all as specified and directed including testing on completion.

Cutting chases in brick / stone masonary for concealed water tubing or concealed conduit for wiring, etc. and making good, cutting, exceeding 20cm girth or as directed

Material and labour for LED (street) Security Light fitting of 25 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 66 complete with all accessories and lamp colour white all as specified and directed. Make- panasonic product code-PSTM23157/Phillips/ Bajaj

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm all as specified and directed.

Supply and filling in and spreading of tibba sand or riddled sand for cushining and covering of the UG cables in trenches all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed. Note: Excavation, earthwork & cable protection measured separately.

Cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/ pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard using all old / new materials as required at site to match with the existing surface all as specified and directed.

Supply and fix GI tubing light grade 40 mm nominal dia in trench/ road/ pole for cable protection complete all as specified and directed.

GMS Builders (BID ID -3199530)

K.AYYAPPAN (BID ID -3199963)

VVM CONSTRUCTIONS (BID ID -3200063)

KGP BUILDERS (BID ID -3199615)

PM CONSTRUCTION (BID ID -3199674)

sree devi construction (BID ID -3199689)

JK BUILDERS (BID ID -3199562)