Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹30.0 L+₹81,299.92 (2.79%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹30.4 L+₹1.2 L (4.11%)Accepted-Finance BASGO LADAKH AUTONOMOUS HILL DEVELOPMENT COUNCIL LEH LADAKH | LEH LADAKH | LADAKH | 194101 | L3 | Accepted-Finance L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others- DD not submitted |
Tender Value
Refer Docs
Closing Date
30 Aug 2021, 4:00 pmClosed
Executive Engineer CD-II PDC Choglamsar
Executive Engineer Chamber Cd-II PDC Choglamsar
Construction of shift quarter at Control room building basgo Substation
2021_PDNRE_4234_1
NIT 17 OF CD-II/PDC 2021-22
Open Tender
Civil Works - Buildings
Item Rate
90 days
Basgo, Leh
Please refer Tender documents.
4 documents required · 4 mandatory
₹700
Yes
Payable To Pay and Accounts Officer PDC Leh
Exempted
31 Aug 2021
26 Aug 2021
31 Aug 2021
26 Aug 2021
30 Aug 2021
26 Aug 2021
Amount
Earthwork in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, includidng dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth and disposal of surplus excavated earth as directed within a lead of 50m : in all kinds of soils
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inclusive of carriage
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) inclusive of carriage
Random rubble masonry with hard stone from quarry in foundation and plinth including levelling upto with cement concrete 1:6:12 at plinth level with cement mortar 1:6 ( 1:cement : 6 coarse sand) inclusive of carriage
Dry random rubble masonry with hard stone in foundation and plinth using quarry/crushed stone inclusive of carriage
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). inclusive of carriage
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.) inclusive of carriage
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column, slab and complete job :(i) Foundation footings, bases of coulmns etc for mass concrete inclusive of carriage
ii) Lintels, beams, plinth beams girders and cantilevers
iii) Suspended floors, roofs landings, balconies and access platform
DPC: Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 12.5mm nominal size and curing complete
Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in position in cement mortar 1:3 , cost of required centering centering, shuttering and curing complete 1:3:6 ( 1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size complete work
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fastners shall be paid for separately). Second class kail wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for seperately all complete as per direction of engineer-in-charge. Second Kail Wood 35mm thick
Providing and fixing specified board flat pressed particle 12mm thick 3 layer particle board medium density grade 1st
Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm 4mm thick float glass panes including ISI marked pressed butt hinges bright finished of required size with necessary screws. Second class kail wood: 35mm thick
Cement Plaster in two coats : 20mm cement plaster on the rough side of single or half brick wall of mix: 1:4 ( 1 cement : 4 fine sand
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface smooth and even complete
6mm thick cement plaster 1:3 ( 1 cement:3 fine sand )mix to ceiling
Cement Plaster in two coats : 20mm cement plaster on the rough side of single or half brick wall of mix: 1:4 ( 1 cement : 4 fine sand Outer wall: external
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work over and including primingn coat of water thinnable cement primer: interior walls
Finishing walls with textured exterior paint of required shade on new work (two or more coats applied @ 3.28 l/10sqm) over and including base coat of exterior primer applied @ 2.20 kg/10 sqm) exterior painting
Cement concrete flooring 1:2:4 stone aggregate 20mm niminal size finishing with a floating coat of neat cement including slurry but excluding the cost of nosing of steps etc 50mm thick 20mm monimal size stone aggregate crushed
Providing and fixing wooden moulded beading to doors and windows frames with iron screw plugs and priming coat on unexposed surface etc complete 2nd class teak wood: Second class teak wood
Applying priming coat with easy mixed pink or grey primer approved brand and manufacture on woodwork (hard and soft wood)
Priming with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work
Providing 40x50mm flat iron hold fast 40cm long including fixing to frames with 10mm dia bolts nuts and wooden plugs and enbedding in cement concrete blocks 30x10x15 cm 1:3:6 20mm niminal size
Providing and fixing aluminium sliding door bolt with nuts and screws etc 300x16mm Doors 9 Nos
Providing and fixing aluminium tower bolt (barrel type) with necessary screws i) Doors 150x10mm
Windows 100x10mm
Providing and fixing aluminium handles ISI marked i) Doors 125mm
Windows 100mm
Providing and fixing 1st quality ceramic glazed tiles conforming to IS 13753 of minimum thickness 5mm of approved make NITCO SOMANY, KAJARAI or equivalent make in all cvollours ans shades over 12mm thick bed of ceramic mortar 1:3 including pointing in white cement
Providing and fixing water closet squatting pan (Indian type) with 100mm sand cast iron P or S trap 10ltr low level PVC flushing cistern including flushing pipe of approved make manually controlled device conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors i) White vitreous china orissa patren WC pan of size 580x440mm with foot rests complete
Providing and fixing wash basin with CI/MS bracket 15mm CP brass pillar traps 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required i) White vitreous china wash basin size 630mm x 450mm with single 15mm CP brass pillar trap
Providing and fixing salem stainless steel kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm including and making good the walls wherever required i) Kitchen sink without drain board 610x460mm bowl depth 200mm
Providing and fixing polypropylene random copolymer (PPR) having thermal stability for hot and cold water supply capable to withstand temperature upto 80degree including all special fittings eg elbow, tees, reducer, couplers and connectors etc including testing of joints complete as per direction of engineer -in-charge : 20mm nominal dia i) Quantity = 70mtr
Providing and fixing CP brass bib cock 15mm nominal bore = 4 Nos
Providing and fixing CP brass angle valve for basin mixer and gyser point of approved make
Providing and fixing CP brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.97kg 15mm nominal bore
Providing and fixing gun metal gate valve of approved quality 25mm nominal bore
Providing and fixing PVC pipes i) 100mm dia 6mtr
75mm dia 40 mtr
Providing and fixing PTMT grating of approved quality circular type 100mm dia
Providing and placing on terrace at all floor levels polythylene water storage tank with cover and surface looking arragement and making necessary holes for inlet outlet and overflow pipes like sintex, electroplast, star lotus etc Qnty = No 1
M/S SONAM NAMGIAL
M/S TSEWANG RIGZIN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .