Development of Bus Stand by way of Remodeling of Ticket Collection Centre and old Toilet Complex and construction of shopping complex on First Floor of Ticket Collection Centre and shops on First Floor near Town Hall Basohli

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth as directed by Engineer-in-charge, including all leads and lift. All Kind of soil.

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttreses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centring shuttering, finishing and reinforcement. a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.

Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means (including all leads and lifts carriages of material by MT/HL)

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Columns, pillars, piers, abutments, posts and

b) Suspended floors, roofs, landings, balconies and access platform.

c) Lintel, beams, plinth beams, girders, bressumers and cantilevers.

d) Edges of slabs and breaks in floors and walls under 20cm wide

e) Foundation, footings, bases of columns etc. for mass concrete

6mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand) (including all leads and lifts carriages of material by MT/HL)

15mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/HL)

12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by MT/HL)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. a) 2mm thick.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall face.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter / 10 sqm over and including priming coat of water exterior paint applied @ 2.20 kg / 10 sqm.

Supply and fixing rolling shutters of approved make, made of required size M.S. Laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for outside and inside locking with push and pull operation complete.

Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm. .(including all leads and lifts carriages of material by MT/HL)

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate. (including all leads and lifts carriages of material by MT/HL)

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terracies etc. consisting of following operations. a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks / Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix. 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs). c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by the Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finished the surface with trowel with neat cement slurry and making pattern of 300x300mm / sqm 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65mm.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua for an average lead of 80.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Kathua for an average lead of 80.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua for an average lead of 80.00 Km. by M.T. d) Bricks from Kathua for an average lead of 80.00 Km. by M.T.

Soni Construction

Kamal Singh

Sanjay Singh Pathania