Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹87,280
Closing Date
5 Aug 2026, 10:00 pm6d left
Karnataka Power Transmission Corporation Limited
AEE7
9449875901
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
KPTCL/2026-27/IND0317
KPTCL/2026-27/IND0317
Open
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bagalkot
25 documents required · 25 mandatory
The Tenderer should have manufactured and supplied at least 50% (25% in respect of Micro & Small Enterprises) of tendered quantity i.e., at least 500 Nos (250 Nos. in respect of Micro & Small Enterprises) of 110KV or higher voltage class Polymer insulatorsTransformers to State/Central owned Transmission Utilities/Generation Utilities.Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises.(Tenderers shall have to upload the supporting Documents such as Purchase order copies, order completion certificates/performance certificates issued by State/Central owned Transmission Utilities/Generation Utilities)
The Tenderer shall be a Manufacturer or authorized Agent/dealer of the original manufacturer of the material/equipment specified in the present enquiry and should have a minimum experience of Five years in designing, manufacturing, testing and supply of polymer Insulators as on the date of bid submission. (Tenderer shall to upload the supporting documents such as purchase order/order completion certificates/performance certificates demonstrating experience of minimum 5 years as Manufacturer of material/equipment specified in the tender).
The Tenderer shall upload the performance certificates for at least 50%(25% in respect of Micro & Small Enterprises) of tendered quantity i.e., at least 500 Nos (250 Nos. in respect of Micro & Small Enterprises) of 110KV or higher voltage class Polymer insulators. The performance certificate shall pertain only to the Current Transformers commissioned in State/Central owned Transmission Utilities/ Generation Utilities.The issuing officer of performance certificates shall not be below the rank of Executive Engineer or equivalent Division head. The performance certificate shall indicate all necessary details such as rating of the equipment, make, voltage, name of the substation where it is installed, date of commissioning etc., in order to show that the above Current transformers were in successful operation for at least a minimum period of two years as on the date of bid submission. Tenderers shall have to upload the relevant performance certificates.Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises.
The Tenderer should have Goods and Service Tax (GST) registration and shall upload the necessary supporting document to establish compliance for having GST registration
The Tenderer shall be individual Proprietorship firm or partnership firm or Company Registered under Companies Act 1956/2013.Tenderer shall upload Registration certificate/SSI Certificate/Udyam certificate (MSME)/Partnership deed/license issued by the Commerce & Industries department or any other Government statutory Authority shall be uploaded. For Proprietorship firm, PAN and GST registration certificate shall be uploaded.
The Tenderer shall upload Test reports not older than Five years as on the date of bid submission for having conducted successful type tests and additional type tests as specified in tender technical specifications, on 110kV or higher voltage class Polymer insulators as per the relevant IS/IEC standards at designated laboratories
The Average Annual Financial Turnover of the Tenderer for best three years out of last preceding five financial years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) should not be less than the Amount Put to Tender ie., Rs. 43.64 Lakh. However, it shall be Rs.21.82Lakh in respect of Micro & Small Enterprises. The Tenderer shall upload audited annual financial statements such as Profit & Loss statements, Balance sheets, turnover certificate for the above period duly certified by a Chartered Accountant. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises
The Liquid Assets as on last date of previous month of tender inviting date or at a later date before submission of the bid consisting of Cash at Bank plus Term Deposits plus availability of fund based credit facilities in any Nationalized/scheduled Bank shall not be less than 25% of the amount put to tender ie., Rs.10.91Lakh. However, it shall be Rs 5.46Lakh in respect of Micro & Small Enterprises.The cash at bank, term deposits and availability of fund-based credit facilities shall be supported by a certificate issued by Nationalized/ Scheduled Bank and same shall be uploaded.If the Tenderer has banking with more than one Bank, then the available liquid assets mentioned above on a particular date i.e., as on last date of previous month of tender inviting date or any date before submission of tender shall be the same date for all the banks.In case of Fund based credit facility, the certificate issued by the Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on last date of previous month of tender inviting date or at a later date, before submission of the bid shall be uploaded.
Any other relevant documents/undertakings/certificates
The Tenderer shall upload the Power of Attorney in the prescribed format on Rs.500/- non-judicial stamp paper. Further Power of Attorney shall be sent in original to Chief Engineer, Electy Transmission Operation Zone KPTCL Bagalkote so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids. Note: a) The Bid Enquiry No. shall be clearly and legibly indicated.b) The offer of the Tenderer shall be rejected in the following cases: i.If the Power of Attorney is furnished on the stamp paper of value below Rs 500/ii.In case the date of execution of Power of Attorney is not mentioned.iii.In case the date of execution of Power of Attorney is prior to the date of purchase of Stamp paper. iv.In case the Power of Attorney is submitted without the signature of the Power of Attorney holder and signature of the person who has authorized the Power of Attorney holder.v.In case tender documents including technocommercial sheets are signed by the different person other than the Attorney holder or the person who has authorized the Attorney holder
The Tenderer should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Tenderer or any partner may result in rejection of Bid.Self-declaration in this regard shall be uploaded
The Tenderer should not be under order of debarment/Blacklisting from participating in a Tender by any State/Central Generating/ Transmission Utility/ESCOMs/Distribution companies or any Government Electrical Utilities/ PSUs, as on the last date of submission of bids.Self-declaration in the prescribed format shall be uploaded
The Tenderer should not have been DEFAULTED in supplies against Purchase Orders placed by any State/Central Generating/ Transmission Utility/ESCOMs/Distribution companies or any Government Electrical Utilities/ PSUs. Self-declaration in the prescribed format shall be uploaded
specified in Section XVI of the tender documents under the heading Eligibility clauses in respect of restrictions on procurement from a Tenderer/ Bidder of a country which shares a land border with India shall be uploaded by the Tenderer/ Bidder in the following format i)I have read the clause regarding restrictions on procurement from a Tenderer/Bidder of a country which shares a land border with India, I certify that this Tenderer/Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Tenderer/ Bidder, fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached/uploaded.ii) I have read the clause regarding restrictions on procurement from a Tenderer/vendor having Transfer of Technology (ToT) arrangement. I certify that this Tenderer/vendor does not have any ToT arrangement requiring registration with the competent authority OR I have read the clause regarding restrictions on procurement from a Tenderer/Bidder/ vendor having Transfer of Technology (ToT) arrangement. I certify that this Tenderer/ Bidder/ vendor has valid registration to participate in this procurement. Self declaration in the prescribed format shall be uploaded
The offer of the Tenderer taking deviations in following clauses will be summarily rejected. Validity of offer, Earnest Money Deposit/ Bid Security, Performance Security/Contract Performance Guarantee, Payment terms. Guarantee/Warrantee, Liquidated Damages/Penalty for delay in supplies, Stipulated Delivery Schedule, Price Basis, Type Tests, Change in offered quantity against tendered quantity
The Tenderer shall upload Guaranteed Technical Particulars of each rating of material/equipment specified in Annexure-A of the present enquiry in the prescribed format uploaded in Techno-commercial sheet, failing which the bid document is liable for rejection
The Tenderer will be disqualified if they have a record of poor performance against KPTCL orders such as abandoning the contract, not properly completing the contract, inordinate delays in completion of contract, if the failure rate of the equipment/materials supplied to KPTCL (either through direct orders or through EPC Contractors) placed in the preceding 5 years is more than 10% of the quantities of 110kV voltage class Current transformers supplied. Note: The disqualification applies to similar equipment/materials for which above mentioned poor performance is recorded/observed.
In case, type test reports of Polymer Insulator of ratios other than those specified in the bid are uploaded, the same are acceptable for the ratios of Polymer Insulators specified in the tender, subject to the condition that the Tenderer shall establish similarity in design and construction between type tested For Polymer insulators and offered Polymer insulators in the event of an award. In case design and construction similarity between the type tested CTs and offered CTs are not established, then the Tenderer shall furnish the type test reports for the ratios of offered Composite Polymer long Rod Insulators at the time of inspection of Composite Polymer long Rod Insulators by KPTCL officers, without affecting the delivery schedule and at no extra cost to KPTCL. Bidder shall upload an undertaking agreeing to this effect along with the bid.
₹500
₹87,280
21 Jul 2026
21 Jul 2026
6 Aug 2026
24 Jul 2026
a) Type of Insulator (Ball and Socket)
b) Size and designation of ball and socket with standard to which it conforms ( mm)
Maker's Name and Address
No. of Insulator Discs/Long rod per string
Dimensions of Single Disc/Single long rod a) Disc Diameter in mm
b) Unit spacing in mm
c) Leakage/creepage distance
Mechanical values of single Disc/Single long rod a) Combined mechanical and electrical strength in KN.
b) Mechanical Breaking strength in KN
c) Routine mechanical test load in KN
Electrical values of Single Disc/Single long rod: a) Low frequency flash over voltage (dry) in KV:
b) Low frequency flash over voltage (wet) in KV
c) Impulse flashover voltage 1.2x50Cys Positive ----------KV Negetive----------KV
d) Power frequency withstand voltage of single disc/single long rod Dry ……………..kV Wet……………...kV
e)Impulse withstand voltage of single disc/long rod. 1.2x50 Cys Positive ……………. KV Negetive……………..kV
f)Power frequency puncture voltage kV of single disc/long rod.
Net weight of Insulator unit in kG.
Minimum visible discharge test voltage kV
Maximum RIV at 10 kV (RMS)
Standard specification to which the Insulators conform.
COMPLETE STRING: a) Total Creepage distance
Total length of string (Insulator only) in mm.
Power frequency withstand voltage of single Disc. a) Dry ………….. kV(rms) b) Wet……………kV(rms)
Impulse withstand voltage ……..kVP
Switching Impulse withstand voltage of single disce a) Dry …………KV(rms) b) Wet………….KV(rms)
Maximum Voltage distribution ……%
Reference drawing (Single Disc)
Place
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- II TECHNICAL DEVIATION
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Please key in the Sl.No., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.
Please don’t insert your Bid values here or else your bid will not be considered for evaluation.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE CHIEF ENGINEER ELECTY., TRANSMISSION(OPERATIONS)ZONE, KPTCL, Bagalkote
Dear Sir,
I have read each of the Clauses mentioned in NIT, INVITATION FOR TENDERS, INSTRUCTION TO TENDERERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT, QUALIFICATION CRITERIA, SCHEDULE OF REQUIREMENTS, TECHNICAL SPECIFICATIONS with respect to Tender Enquiry No: KPTCL/BGKT/CEE/TZ/2026-27/Insulator
The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents of Tender Enquiry No: KPTCL/BGKT/CEE/TZ/2026-27/110KV CT/01). for Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading. These deviations and variations are exhaustive.Except these deviations and variations, the material shall be supplied as per specification and documents.
Note : Deviations specified elsewhere in the specification will not be considered.
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- III COMMERCIAL DEVIATION
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Please fill Only in the Light Blue Couloured Box
Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL Office.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE Chief Engineer, Electy, Transmission Operations Zone KPTCL Bagalkote
Dear Sir,
I have read each of the Clauses mentioned in NIT, INVITATION FOR TENDERS, INSTRUCTION TO TENDERERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT, QUALIFICATION CRITERIA, SCHEDULE OF REQUIREMENTS with respect to Tender Enquiry No: KPTCL/BGKT/CEE/TZ/2026-27/Insulator for TTender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
The following are the Commercial Deviations and Variations from and exceptions to the Tender documents of Tender Enquiry No: KPTCL/2025-26/IND0191 for Tender for Design, Manufacture, Testing and supply of total quantity of 771 Nos. of 66kV class Current Transformers of various ratios i.e., 1000-600/1-1-1A, 200-100/1-1-1A, 1600-1000/1-1-1A, 800-400/1-1-1A, 1000-800/1-1-1A, 1200-800/1-1-1A, along with 86Nos. of Marshalling Box conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading.
Note : Deviations specified elsewhere in the specification will not be considered.
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
A) Details to demonstrate Manufacturing experience of 5 years
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
SHEET FOR TECHNO-COMMERCIAL OPENING
Please don’t insert your Bid values here or else your bid will not be considered for evaluation.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate Manufacturing experience of 5 years Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/BGKT/CEE/TZ/2026-27/ACSRConductor
I) Details to demonstrate Manufacturing experience of 5 years
NOTE: Supporting documents to be uploaded
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(B) Details to demonstrate past supplies
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate past supply details Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No.KPTCL/BGKT/CEE/TZ/2026-27/Insulator
NOTE: Supporting documents to be uploaded
Orders placed by (Full address of Purchaser)
if any
As per contract
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(C) Details to demonstrate satisfactory Performance of equipment for 2 years
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate satisfactory performance of the equipment for 2 years Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
NOTE: Supporting documents to be uploaded
Orders placed by (Full address of Purchaser)
if any
As per contract
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(D) Details of Type test & additional type test reports
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of type test & additional type test reports of the equipment, which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/BGKT/CEE/TZ/2026-27/ACSRConductor
NOTE: Supporting documents to be uploaded
Name of the equipment
Place
SCHEDULE V ASSESSEMENT OF FINANCIAL CAPABILITY OF THE BIDDER
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Name of the Tenderer
Enquiry No
Details of Material to be supplied
Quantity tendered
Annual Turnover for the last Five years
Liquid Assets as per Financial Criteria
Capital assets for the last Five years
Current Ratio for the last year
Current Assets
Current Liabilities
Documents to be enclosed.
Banker's /Financial Institutions endorsement for limit of Financial leading.
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE - VI
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Name of the Firm
Place of Manufacture
Scope of the proposal
Power of Auttorney for signing the Documents
Bid Form
Bid Security/EMD
Bid Validity
Manufacturer /Supplier
Experience
Quantity Tendered / offered
Prices
Taxes & Levies
Payment Terms
Warranty/Guarantee
Penalty for delay in supplies
Delivery/Completion Schedule
Termination of contract
Performance Security
Guaranteed Technical Particulars
Place
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/Insulator
Tender for Design, Manufacture, Testing and Supply of 1000No.s of various class of Composite Polymer long rod Insulators ( 220kV-120KN, 110kV-90KN Tension type & 220KV-90KN, 110kV-90KN Suspension type) for various divisions coming under Transmission Operations Zone, KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
CHECK LIST FOR QUALIFYING REQUIREMENT
Please make sure that the following supporting document are uploaded without which the tender is liable for rejection.
QR regarding status of Tenderer/type of company
For details, refer Section-VII
QR regarding GST registration
For details, refer Section-VII
QR regarding manufacturing experience of 5 years.
For details, refer Section-VII
QR regarding past supply details
For details, refer Section-VII
QR regarding past performance of equipment
For details, refer Section-VII
QR regarding Guaranteed Technical Particulars of of each rating of material/equipment specified in Annexure-A of the present enquiry in the prescribed format to be uploaded in Techno-commercial sheet.
For details, refer Section-VII
QR regarding type test reports.
Type test reports and additional type test reports.
For details, refer Section-VII
QR regarding repetition of type tests and additional tests in case KPTCL insists.
Relevant undertaking adhering to this QR.
For details, refer Section-VII
QR regarding Annual Financial Turnover of the Tenderer
For details, refer Section-VII
QR regarding Liquid Assets
For details, refer Section-VII
Self-declaration in the prescribed format as per Section-XVI regarding “Eligibility clauses in respect of restrictions on procurement from a Tenderer/Bidder of a country which shares a land border with India”.
For details, refer Section-VII
Details of performance of past supplies of Tenderer
For details, refer Section-VII
Self-declaration in the prescribed format regarding DEFAULTED in supplies.
For details, refer Section-VII
Self-declaration in the prescribed format regarding debarment/Blacklisting.
For details, refer Section-VII
Litigation History: Self -declaration in the prescribed format regarding litigation history.
For details, refer Section-VII
Power of Attorney in the prescribed format Section VIII (Appendix C) on Rs.500/- non-judicial stamp paper and shall be sent in original to Chief General Manager (Tech), KPTCL, Bangalore so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids.
For details, refer Section-VII
No deviation certificate.
For details, refer Section-VII
Yes/No
Tender Form in the format prescribed at Section-VIII (Appendix A).
Details of Tenderer in the format prescribed at Section-VIII (Appendix B) along with supporting documents;
Power of Attorney for Signing of Proposal in the format prescribed at Section VIII (Appendix C)
Checklist of documents uploaded by the Tenderer along with the Tender prescribed at Section VIII (Appendix D)
Earnest Money Deposit in the manner and form at Section-IX as specified in Clause 13 of ITT
Technical Capacity of the Tenderer in the format prescribed at Section-XII, along with supporting documents
Equipment And Quality Control Employed By the Manufacturer in the format prescribed at Section-XIV
Techno–Commercial sheets duly filled in, Data requirement sheets/GTP.
All other relevant documents/ undertakings/declarations/details specified in the Tender document.
Place
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 317.pdf
Others - NIT • 0.75 MB
Technocommercial sheets Insulator.xlsx
Techno-Commercial Worksheet • 0.10 MB
Section 1 to 16.zip
Tender Document • 0.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].