Civil work for Auditorium for Nagar Parishad, Dausa, Rajasthan

EARTH WORK

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

BRICK / STONE MASONERY WORK

Providing and fixing of Woven vinyl carpet floorings of VIBRANT FLOORS series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architech. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Vibrant Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding.As per approved shade and colour as per the satisfaction of the Architect.

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats)

Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision Trowel Finish av. thickness 1000 to 1200 microns.

Providing & Laying POP moulding & beading in ceiling including nailing & scafollding etc. complete of size :

25mm x 12mm

25mm x 25 mm

Providing & Laying POP Cornice of required design & pattern in ceiling including nailing & scafollding etc. complete with fine finishing of size 50mm x 50mm.

Providing and Fixing in position Armstrong/Gyptech/durlom acoustical Wall Panelling' with square edges made of fire glass substrate 25mm thick and wrapped on the front side with an acoustically transparenct and classified for Fire reaction class-A, as per ASTM E-84 fabric with an option of colour -Husk, copper, sangria, Sesame, Coffee, Charcoal, Titanium. Flame Peanut and Shell as per the choice of architect of sized 600X1200 mm providing a minimum sound absorption level of .85 NRC to be affixed to wall using Wall panel impellers supplied by Armstrong/Gyptech/Durlom Ceilling Solutions and construction adhesives as per instrutions laid done manufacturer. Insullation : In order to fix the panels to the wall, the impellers shall be fixed to the wall surface using self tapping screws & wall panel impellers to be used for the installation purpose. Silica based constuction adhesive to be dabbed on to the projecting elements (spikes) of the impellers. Armstrong Optra wall panels shall be pierced through the spikes of the impellers ensuring the line and level of the panels are maintained. Insulation to be carried out by Armstrong Trained Installaion team & Installation should be carried out as per Armstrong recommended procedure and pattern decided by Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing Hassian cloth of approved colour and texture over soft wood frame glass wool & fibre glass tissue paper

Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica.

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).

Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Powder coating aluminum ( minimum thickness of powder coating 50 micron)

Providing and fixing sun control film, thickness of film 1 Mil Visible Light Transmittance 4-24% & Solar Energy Transmittance 42-51% & Total solar Energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge.

Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm wide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom.

Providing and fixing Structural glazing work with toughened glass of 6mm thick and reflective colour as approved in dark shade like Blue/Dark Blue etc. with frame work of curtain section 65x60mm (Weight 1.64 kg/m min.) made of aluminium with chrome plating. Internal frame work will also be of curtain section 65x60mm of chrome plated aluminium section with20x20mm aluminium tube section and structural spacer made of rubber. The aluminium frame work size as per instruction of Engineer-in-charge and including openable panels with all necesary sections and fitting.The work include silicon structural adhesive for complete gripping of glass with framing members and silicon weather seal sealant to prevent moisture/water through joints. Glass will be fixed in plumb and with uniform spacing of 10-12mm wide duly filled with silicon weather seal sealant. The work includes all labour,scaffolding , structural aluminium work, toughened glasses,silicon weather seal sealant, silicon structural adhesive structrucal spacer, all accessoreis like handles, peg stays, M-15 grade cement concrete for fixing holdfast .(Face area of glass shall be measured)

Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and

laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg. NCR 0.55 light reflectance> 80% thermal conductiveity K = 0.052-0.057 w/m K colour white. Fire performance class 0/class I(BS 476) with warranty against sag)

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre tocentre one flange fixed to the ceiling with dash fastener 12.5mmdiax40mm long with 6mm dia bolts to the angle hangers of25x25x0.55mm of required length, and other end of angle hangerbeing fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I,

P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia.

P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.

Providing & fixing C.P.flange for 15mm dia taps.

Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge

Pillar Cock 15 mm nominal size

Swan neck pillar cock 15 mm nominal size

Bib Cock with long thread 15 mm nominal size

Long body Bib Cock 15 mm nominal size

Two way Bib Cock 15 mm nominal size

Angular stop cock with long thread 15 mm nominal size

Stop cock long thread

Stop cock with reduced body

Concealed stop cock 15 mm nominal size

Sink cock with swinging casted spout (table mounted ) 15 mm nominal size

Single lever wash basin mixer with 450 mm long copper connection pipe

Central hole basin mixer

Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe

600 mm long towel rail

Revolving type towel ring

Soap dish

Double coat hook

190 mm rain shower

Shower arm

Paper holder

Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete

Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. Diameter 900 mm

Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with 40 mm thickness Diameter 900 mm

Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc.

Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids

Size 9 to 12 mm

Size 3 to 5 mm

Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids.

Grand Total ( BUILDING H-SCHEDULE

Supplying and fixing of ISO Certified company made Krone module with base frame as per PWD specification for electrical Works, intherecess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangement sduly powder painted, including dressing, ferruling and punching of telephone cable with krone tool etc. asrequired. All as per pre approved by Engineer incharge. For additional technical parameters of products / work, refer Annexure"A"attached with this BSR .

10 Pairs

20 Pairs

50 Pairs

Design, Supply, Installation, Testing, Commissioning of Electrical Panel As per SLD and approved by Engineering Incharge.

Total (ELECTRICAL H-SCHEDULE)

Supply, Installation, Testing and Commissioning Active Repeater Panel for Fire Alarm System with UL/EN54 certification with inbuilt networking port (both RS485 & Ethernet),Serial port for printer,two supervisory inputs,two position key switch and USB port for programming. The Repeater Panel shall allow users to acknowledge, reset,silence, program, view hisory events.etc (All functions similar to main panel)The user interface of the repeater panel shall be same as the Main Controller with menu driven user interface with smart search.including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&P etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

SITC of UL 10th edition / EN54 VDS approved IP40 Analog addressable Multi criteria (two optical/Smoke sensor to reduce false alarm ) type Photo smoke detector with mounting base & LED etc including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&P etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . with inbuilt isolator or with isolator base

Supply installation testing and commisisioning of Addressable control (input/output) modules/ Relay Module for shutting down lifts, AHU's, Acknoledgement of Sprinkler system etc. with potential free contact monitoring Shall have EN54 /UL Certification. including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&P etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

with inbuilt isolator or with isolator module

2 Core 1.5 Sqmm 120 Min Fire Survival Armoud Cable

Supplying & fixing Short Branch Pipe with Nozzle ISI marked conforming to IS: 903, made of following material , fitted with 20mm (nominal internal diameter) bore nozzle, for projecting water in form of solid jet. The Branch shall have 63mm Male Instantaneous Inlet, suitable for use with 63 mm size Fire fighting hoses. H.P. tested to 21 kgf/cm² for 2.5 minutes complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Gun Metal material.

Supply and Fixing of Stainless Steel Flexible Hose Pipe, Made of Corrugated Stainless Steel, Rated Pressure 200psi –Assembly complete with: Inlet nipple with 1” NPT male thread, outlet reducer with 1/2" NPT female thread to sprinkler head, 700mm Square Bar, Centre Clamp & 2 Nos side brackets. complete as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1000 mm Long

Providing, installation, testing and commissioning of Brass ball valves (PN-16) duly ISI marked confirming to IS : 9890-1981 complete with flanges,Nuts, Bolts, washers, gaskets etc of following sizes as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

25 mm dia

32 mm dia

Supplying and Fixing of Y type strainer fabricated out of cast iron/ steel body, strainer shall have 1.6 mm. thick stainless steel sheet perforated screen with 3 mm. dia holes with flange at both ends complete with nuts, bolts, washers, gaskets etc of following sizes. complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

200 mm dia

150 mm dia

80 mm dia

Fire Extinguishers

Supply & Fixing of ABC Type (MAP 50) type powder Fire Extinguisher (Stored Pressure type) of following capacity duly current and valid BIS certification conforming to IS: 15683:2006, with Dry chemical powder used as extinguishing agent should be Mono Ammonium Phosphate 50% concentration conforming to IS 14609:1999. OEM will produce supplier certificate complete with squeeze grip release valve, locking arrangement, pressure gauge and bracket including initial fill and wall suspension complete in all respect. Serial no. and date of manufacturing should be embossed or printed on the body of the fire extinguisher. The firm should submit the product certificate from an EN notified body & product performance test report from NABL accredited Lab as per IS 15683. . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 4 kg

Providing, Fixing, Jointing, Testing & Commissioning of Heavy duty MS C class pipes conforming to IS 3589 / 1239 part-I for hydrent and sprinkler applications including cutting, screwing, welding etc & malleable iron fittings like elbows, tees, flanges, tapers, reducer, with compressed asbestos gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts as per approved spacing. complete with painting of one coats of Red Oxide and two or more coats of synthetic enamel paint of Post office red shade complete as required.Complete installtion shall be pressure tested at 14kg/sqcm for 24 hr as per practice complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

25 mm dia

Fabrication, Supplying, Installation, Testing & Commissioning of Fire Electrical Control Panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade Bus Bar : Aluminium busbars rated at 415V, 250 amps TPN , 50Hz Incoming : MCCB, 4 Pole, 250 A, 25 KA 1 No. Outgoing for Main Fire Pump MCCB 125 A TPN - 1 Set MCB 100 A TPN - 1 Set MCB 63 A TPN - 2 Set Suitable rating & type standard relays, contactors and other accessories for automatic operation of diesel engine

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured / Armoured copper cable of 1.1 KV grade as per PWD specification for electrical Works in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c), mentioned below:- (a) Copper conductor of electrlytic grade copper, purity >99.97 % ISI marked as per IS:1554 P-I / IS :7098 P - I (b) conductor shall made of copper rods confirming to IS 613-1964, IS 3975-1999 for armouring of cables in armoured cable items , IS 5831 for sheath, IS 10810 (Part 0 to 64 ) for testing procedures (c) OEM Must have ISO 9001 & 14001 certifications & its own in house NABL lab setup for all testing acilities for cables . Appropriate type test certificate OEM test report shall be submitted . All above as er pre approved by Engineer in charge. For dditional technical parameters of products/ wor , refer Annexure "A" attached with this BSR. Armoured Cable.

1.5 Sq. mm 6 core

10.0 Sq. mm 4 core

35 Sq. mm 4 core

1.5 Sq. mm 2 core

EQUIPMENTS

WATER COOLED SCREW CHILLING MACHINES

Supplying, installing, testing and commissioning of WATER CHILLING UNITS each complete with screw compressor, motor(s) starter(s), water cooled condenser, insulated chiller, flow switch at chiller and condenser, vibration isolators, integral refrigerant piping and wiring, accessories as required and called for automatic and safety controls mounted in central console on a steel frame complete as per specifications. Motor shall be suitable for 415+(-) 10%, 50 cycles, 3 phase AC supply. Refrigerant used shall be R-407.The chiller should be BMS compatible & with integration card & software as detailed in specifications.

Actual Capacity 134 TR

Chiller Water IN 12.2 Deg C

Chilled water OUT 6.67 Deg C

Fouling Factor 0.0001 FPS

Condenser

Condenser Water IN 29.4 Deg C

Condenser Water OUT 34.6 Deg C

Fouling Factor 0.00025 FPS

Chilling units as described above of following actual refrigeration capacities: IKW/ TR- 0.66 AND COP- 5.34 140 TR water cooled screw chiller Supply price

PUMPS

Supplying, installing, testing and commissioning of CENTRIFUGAL vertical inline / horizontal end suction type pumps. Factory mounted on a common base with electric motor for recirculation of water for the central Air conditioning system. All pumps motor shall be aligned properly as required. The pump motor shall be suitable for 415 +(-) 10% volts. 50 cycles, 3 phase power supply. The quoted price shall include cost of thermal insulation and cladding for chilled water pumps. Pumps with performance characteristics as given below:

Primary Chilled water pumps

Supply, installation, testing and commissioning of horizontal end suction type chilled water circulating pump sets complete with coupling, IP 55 T.E.F.C. motor with class 'F' insulation, base plate, priming pannel, cathodic electro deposit (C.E.D.) type anticorrosive coating inside & outside casing, SS shaft, base frame, bronze impeller, cast iron casing, mechanical seal, coupling guard, foundation bolts, cabinet suitable for indoor installations, corrosion resistant finish,with suction diffuser to connect the inlet of the pump & the incoming pipe etc. as per specifications and drawings.

Primary Chilled water pumps 144 usgpm at 12 M (1 no.W + 1 no.stand by)

Secondary Chilled water pumps

Supply, installation, testing and commissioning of vertical inline chilled water circulating pump sets complete with coupling, IP 55 T.E.F.C. motor with class 'F' insulation, base plate, priming pannel, cathodic electro deposit (C.E.D.) type anticorrosive coating inside & outside casing, SS shaft, base frame, bronze impeller, cast iron casing, mechanical seal, coupling guard, foundation bolts, cabinet suitable for indoor installations, corrosion resistant finish,with suction diffuser to connect the inlet of the pump & the incoming pipe etc. as per specifications and drawings. Secondary Chilled water pumps us 144 gpm at 18 M Condenser water pumps

Supply, installation, testing and commissioning of horizontal end suction type condenser water circulating pump sets complete with coupling, IP 55 T.E.F.C. motor with class 'F' insulation, base plate, priming pannel, cathodic electro deposit (C.E.D.) type anticorrosive coating inside & outside casing, SS shaft, base frame, bronze impeller, cast iron casing, mechanical seal, coupling guard, foundation bolts, cabinet suitable for indoor installations, corrosion resistant finish,with suction diffuser to connect the inlet of the pump & the incoming pipe etc. as per specifications and drawings.

Condenser water pumps 240 us gpm at 16 M (1 nos.W + 1 no.stand by)

AHU COIL DEPTH - 4 ROWS

A.H.U./FCU

AHU COIL DEPTH- 4 ROWS

12000CFM FLOOR STANDING

2500 CFM (Ceiling suspended type)

1200 CFM (Ceiling suspended type)

800CFM (Ceiling suspended type)

TEMPRATURE GAUGE

Providing and fixing in position dial type temprature gauges with isolating gate valves in both the scales (degree C & degree F).

PRESSURE GAUGE

Providing and fixing in position dial type pressure gauges with isolating valves in both the scales (meters & British units).

FLOW SWITCH

Providing and fixing in position threaded type digital flow switch.

COOLING TOWER

EXPANSION TANK

Supply, installation, testing and commissining of expansion tank of following capacity with inlet/ outlet valves, float valve and full way Gate Valve duly insulated with 50 mm thick EPS of 20 kg/cu.m density and plastered. Fabricated out of 6mm MS sheet . 1000 ltr.

PIPING

CHILLED WATER PIPING :

Supplying, laying, fixing, testing & commissioning MS 'C' class pipes cut to required length with necessary, clamps, supports, antivibration, hangers,fitings, such as bends, tees, reducers etc. and installed with all weided joints complete as per specification & drawings.

200 mm dia MS pipes 4.50 MM THICKNESS

65 mm dia MS pipes

50 mm dia MS pipes

32 mm dia MS pipes

CONDENSER WATER PIPING

Supplying, laying, fixing, testing & commissioning MS class 'C' pipes cut to required length with necessary clamps, supports, antivibration, hangers, fittings such as bends, tees, reducers etc. and installed with all welded joints complete as per specification & drawing.

250 mm dia MS pipes

DRAIN PIPE

Supply, laying, fixing, testing & commissioning of UPVC pipes with 9mm thick nitrile rubber tube insulation complete with all necessary fittings such as elbows, tees, reducers etc and supports such as clamps etc complete as per specification and drawings.

32 mm dia

25 mm dia

VALVES

Supply, fixing, testing and commissioning in position the following valves, strainer etc. in chilled Water line complete with flanges etc as per specifications & drawings.plant room valve and floor valve

AIR DISTRIBUTION

SITE FABRICATED DUCT

Supply, fabricating, installating, and testing of Site Fabricated ducts of following thickness including necessary supports flexible hangers with isolators, nut bolts, gasket splitter damper vanes, etc. complete as per specifications in accordance with the approved shop drawings and required by the specifications:

24 gauge galvanised sheet

22 gauge galvanised sheet

FLEXIBLE CONNECTION

Supply, fabricating, installing, and testing of double canvas flexible connection constructed of fire resistant material as per the drawings /specifications.

GRILLE / DIFFUSER/DAMPERS

Supply, installation, testing and commissioning of square supply / return aluminium air grille/diffusers as per approved shop drawings and colour. Each grille/diffuser will be equipped with removablecore and a aluminium volume control damper which will be key operated complete as per specifications and drawings.

Powder coated extruded aluminium air diffuser with aluminium damper of approved colour and shade.

Powder coated extruded aluminium air diffuser without damper of approved colour and shade.

Supply, installation, testing and balancing of linear grille as per approved drawings and specifications.

Powder coated Extruded Aluminium construction linear grill with aluminium damper of approved colour and shade.

ACOUSTIC LINING THERMAL INSULATION

ACOUSTIC LINING (DUCTS) :

Supply, installation & testing of acoustic duct lining with fiber glass wool rigid board (Density not less 32kg/m³) on supply air ducts as per specifications. 12.5 mm thick

Supply, installation & testing of acoustic lining of AHU Room with fiber glass wool (Density not less 32kg/m³) as per specifications. 50 mm thick

THERMAL INSULATION

Duct Insulation

Supply & installation on External surface of Duct Thermal insulation with protective coating on ducts as per the specifications.

9mm thick Nitrile Rubber insulation (Density 65kg/m³ ) for supply air ducts in return air path and return ducts.

CHILLED WATER PIPING INSULATION :

Suppling, installing & testing of 19mm thick Nitrile Rubber insulation (Density 65kg/m³ ) with protective coating on chilled water & fitting like valves, flanges union, etc. as per the approved shop drawings & specifications.

Supply, installation and testing of 25mm thick Nitrile Rubber insulation (Density 65kg/m³ ) with protective coating on chilled water pipes and fittings like valves, flanges & unions etc.as per approved shop drawing & specifications.

200mm dia pipes

65mm dia pipes

50mm dia pipes

40mm dia pipes

32mm dia pipes

providing & fixing Seat Auto tip up auditorium chairs with 560 mm center to center of armrest with soft P.U coated armrest of made of Soft Cushioned PU . Providing p.p cover for seat & back outer .using seat and back p.u mould of high density covered with approvedshade FR fabric.chair leg made of 2 mm thick MS sheet .all metal component powder coated with 40 -50 microns. embossed leg is providing for stability & strength of mounting. The pedastal legs shall be having mounting hole mounted by 100 mm length split hollow anchor ,in which we insert 3 mm dia m.s rod to split out the tails of anchor & griping hardly on the floor. Chair back is designed for extra ergonomicaly comfort & back support. Torsion Spring used in chair seat tip up. Side panels fully upholstreated with fabric of approved shade with inside m.s frame. base padestal made of 2mm(14 gauge) m.s sheet & leg pipe made of 2 mm thick m.s pipe of size 80mmx30mm capsul shape pipe. the sizes are specified below:- Seat size:- 460mm(w)x460mm(d) Back size:-500mm(w)x750mm(d) seat hight:-400 mm top to floor hight:-1040 mm handle to handle:-560 mm overall size:-690mm(w)x750mm(d) Approved make like Nilkamal, Hawort, Durian, Herman Miller, Rockworth

Surface Drains in Soil

Manual Means

Manual Means

Surface Drains in Ordinary Rock

Construction of unlined surface drain of average crosssectional area 0.4 sqm in ordinary rock to specified lines, grades, levels and dimensions as per approved design and MoRTH Specification Clause 309. Excavated material to be used in embankment at site.

Manual Means

Stage Lighting

SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9˚ / 25˚ / 45˚Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 420W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014

SITC of 100W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel LensCRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 110W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ Working Temperature - +40° ~ -30° Active Cooling with Low Noise Fan DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin/3pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s Total Power Consumption of 180W Sound Active Mode Control IP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD

SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems.

SITC of Fixed on stage Lighting bar/winch of 10Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures

SITC of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site conditions

SITC of Fixed FOH Lighting bar/winch of 11Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures

SITC of Power Distribution Electrical panel having a Individual MCB control for 18 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivery connectors for the internal terminations and external outgoing connecting points, Fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Custom built as per specification and project requirement.

SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing

SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing

SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.

SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing

SITC of Digital Lighting Console with 1024 DMX channels, 1024 Channels. 10 Programmable Executors Master Fader, Keypad entry, LCD Display, Encoder Wheels Time control of scenes: Fade in/out, LTP slope Channels for each fixture 40 primary + 40 fine tune Switchable Page Scenes/Playbacks 10 Scenes to run simultaneoulsy 600 Scene step Shape generators: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus, Master slider - Global, playback, fixture USB Memory - FAT32 supported

SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal.

Stage Drapery

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems.

SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size.

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:17Mtr x 7.5Mtr.

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 15.5Mtr x 7.5Mtr.

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 11Mtr x 1Mtr.

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 17Mtr x 1.2Mtr.

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 6.5Mtr x 1.5Mtr

SITC of On Stage Fixed Frill Bar 11 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

SITC of On Stage Fixed Valance Bar 17 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

SITC of Fixed Wing Structure designed as per site condition for a height approx 6.5 Mtr x 1.5Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable.

SITC of Motorized DMX operated Main Curtain 17 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated

SITC of Fixed Rear Curtain 15.5 Mtrs straight, Centre partting as per design. Made up of I Track for complete length Curtain holding trollies Providing ball bearing for smoother noiseless movement 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Suspension through Suspenders as per site conditions Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated

Supply of stage left and right clusters having 14" LF driver or better and multiple MF/HF drivers (More than 4), Biamplified 2 or 3 Way line array loudspeaker system, with Individual Module free field Frequency Range (-10dB) of 55Hz - 18kHz or better & Continuous Power Handling of >= 750W LF + 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 130 or better. It should have Horizontal near dispersion pattern of 90º or better, vertical dispersion of the array shall be 70 degrees or better. The Modules shall be of Baltic birch plywood construction with IP55 weather rating. Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply of OEM Couling plate for array modules, array frame pull back hardware for extreme pitch angles & array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings. Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply, installation, testing & Commissioning of a single 18" subwoofer. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 29Hz - 300Hz. It should have an ground stack position Sensitivity of > = 98dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=133 dB; Nominal impedance of 4ohm or higher and continuous Power Handling of 750W or more. The loudspeaker system shall be comprised of a Baltic birch plywood enclosure with standard array rigging hardware for Cardioid as well as stacked position. Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply of Low profile High SPL all weather Fill / Monitor loudspeakers with 5" LF Driver & 1.5" or better VC compression driver; Frequency Range of 90 Hz - 18 kHz or better; Nominal Dispersion : 90°H x 90°V with rotatable horn; Long term Power handling of 150 W or better; Sensitivity : 90 dB; Max SPL : 118dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 80W OEM Input transformer kit for Distributed system applications. Standard wall bracket shall be included. Shall be rated for IP55 outdoor installations as per IEC 529 specs. Approved Make: Bose / L-acoustics / d&b audiotechnik / EAW

Supply, installation, testing & Comissioning of passive coaxial two-way point source monitor loudspeaker with a single 8-12" LF driver and compression driver with 2" or better Voice coil. Frequency Range (-10dB) of 75Hz - 20kHz or better & long term Continuous Power Handling of 150W or better. The Loudspeaker module shall have a Max. SPL (Peak) of 128dB or better. It should have Horizontal dispersion pattern of 110º or better, vertical dispersion of the loudspeaker shall be 60 degrees or better. The loudspeaker shall be enclosed in a baltic birch plywood enclosure suitable for monitor placement with perforated steel grille. Approved Make: Bose / L-acoustics / d&b audiotechnik / EAW

Supply , installation , testing and commissioning of Compact Indoor/Outdoor type IP55 rated wall mount Music Loudspeaker: Free field Frequency range (-10dB) of 80Hz to 16kHz; Power handling of 64 Watt peak; Nominal dispersion of 150 H X 150 V; Free field Sensitivity of 84 dB SPL and Max SPL of 103 dB SPL peak; Nominal Impedance 8 Ohms; Integral multi-tap Transformer with tap settings of 2/4/8/16 W @ 100V. with Powder-coated steel grille; Brackets with pitch/yaw adjustment included. Approved Make: Bose / EAW / Martin Audio

Supply, installation, testing & Commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Dante based Digitial audio input card for offered multichannel amplifiers.; Port Modes : Switched (default), Redundant Legacy Hardware Isolated (for control only); Interface Data: Dante network audio and control data ; Format 48 kHz, 24 bit PCM; Shall support redundant connections compelte with standard accessories Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs. Approved Make: Bose / PowerSoft/ Ashly Audio

Supply, Installation, testing and commissioning of intregrated low impedence Class D, with Amplifier Power as 2 x 50 W @ 4 Ω, 2 x 25 W @ 8 Ω ; Frequency Response - 40 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) ; THD+N - ≤0.3 % (at full rated power) ; Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms - (any input to speaker output or aux output) ; Maximum Input Level : +10 dBV or better Approved Make: Bose / PowerSoft/ Ashly Audio

SITC of wireless handheld microphone with (UHF) Diversity receiver ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Cardioid , Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter , Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40 Mhz Or better. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of wireless Lapel microphone, with (UHF) Diversity receiver ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz, Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter, Receiver dynamic range 106dB (A-weighted) switching bandwidth Minimum 40Mhz Or better. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of wireless Headword microphone with (UHF) Diversity receiver,12 Channel Present or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Supercardioid, Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr, Should have Charging Contact in Transmitter, Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40mHz Mhz Or better. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of 4-way wideband antenna splitter operating in the frequency range of 470 to 1,810 MHz. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of Passive omnidirectional wideband antenna, for wireless systems with BNC connector, incl. stand adaptor Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of Wideband antenna amplifier for wireless systems with BNC connector, 5 dB/ 10 dB/ 15 dB switchable gain, feeding from antenna cable or external power supply Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of Mounting kit for Antenna Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of Antenna Cable 25m. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of Wired Vocal Microphone with On/Off switch, Transducer type: Dynamic, Polar pattern: Cardioid, Frequency response: 50 - 17,000 Hz, Open circuit voltage : 2.4 mV/Pa (-52.5 dBV) ±3 dB, Nominal impedance 600 Ω, Connection: XLR, 3-pin, male, etc. complete with installation as per the site requirement. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of Instrument Microphone with high-frequency reproduction Polar Pattern: Cardioid, Frequency response : 33-19,000 Hz, Open circuit voltage : 2.7 mV/Pa (-51.4 dBV), Nominal impedance : 600 Ω, Load impedance : ≥ 2 kΩ, Connection : XLR, 3-pin, male, etc. complete with installation as per the site requirement. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of drum microphone set consisting of 7 microphones, incl. microphone clamps and rugged softbag Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of headphone, closed systems, Transducer type: Dynamic, Nominal frequency response: .5-35,000Hz, Nominal impedance : 80Ω, straight single sided cable 3 m (9.8 ft.) with stereo mini-jack / 1/4" adapter Approved Makes: Beyerdynamic/Sennheiser/Shure

Supply, installation, testing and commissioning of Digital Audio Mixer with 32-40 input Digital Mixing Console and USB Interface and 32 programmable Preamps, 24 or better Motorized Faders, 40 DSP input channels (32 mono inputs and 4 stereo channels/returns), Channel LCD's, FireWire/USB Audio Interface and iPad/iPhone* Remote Control include I/O Box with 16 Remote-Controllable Preamps, Including Mini Stagebox 16 or 32 Channel combine high-quality components with a streamlined design, making it easy to add multiple channels of remote- controlled I/O toDigital mixing console. Complete in all respect as desired by the Engineer in charge of work at site. Complete in all respect as desired by the Engineer in charge of work at site. Make: Soundcraft/Yamaha. Approved Makes: Yamaha/Allen & Heath/ Digico

SITC of 1-chip DLP LASER Phosphor Multimedia Projection system having, 12500 ANSI Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 1200000:1 Contrast Ratio, inputs: HDBaseT, HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith medium throw lens complete with installation as per the site requirement. Approved Makes: Christie / NEC /Barco

Supply, Installation testing & commissioning of Mounting/hanging arrangement of above projector Approved Makes: Custom (EIC Approved)

Supply, Installation testing & commissioning of 300" diagonal Cyclorama screen with aspect ratio of 16:10. Approved Makes: Custom (EIC Approved)

Supply, Installation testing & commissioning of Wall Plate type transmitter with 1 x HDMI, 1 x VGA with audio; transmission range : 70 meter; Auto‑switching between inputs; Supports computer and video resolutions up to 4K; Analog stereo audio embedding. Approved Makes: Extron/Kramer/Lightware

Supply, Installation testing & commissioning of HDMI over twisted pair Receiver having 1 x HDMI output along with audio port; 1 x Twisted pair Input; Ccontrol port : RS-232 & IR; Supports computer and video resolutions up to 4K; Transmission range : 70 meter; HDCP 2.3 compliant. Approved Makes: Extron/Kramer/Lightware

Supply, Installation testing & commissioning of 8x4 Presentation Matrix Switcher having six HDMI input, two DTP twisted pair input; Four HDMI output, two Twisted pair output; Max resolution upto 4K; Max video data rate : 10.2 Gbps; 2 x bidirectional RS‑232 ports; 1 x bidirectional RS‑232/RS‑422/RS‑485 port; 2 x IR/Serial ports for one-way control; 4 x relays; 4 x Digital I/O ports. Approved Makes: Extron/Kramer/Lightware

SITC of Flexible 6 feet 10G HDMI CABLE Approved Makes: Extron/Kramer/Lightware

SITC of Flexible 3 feet 10G HDMI CABLE Approved Makes: Extron/Kramer/Lightware

SITC of Flexible 12 feet 10G HDMI CABLE Approved Makes: Extron/Kramer/Lightware

SITC of Flexible 24AWG SHIELDED Twisted pair CABLE for HDBT Video Approved Makes: Extron/Kramer/Lightware

SITC of 23 AWG 2 core shielded microphone cable Approved Makes: Extron/Kramer/Krystal

SITC of 14 AWG, 2 core Loudspeaker cable Approved Makes: Extron/Kramer/Krystal

SITC of 12 AWG, 2 Core Loudspeaker cable Approved Makes: Extron/Kramer/Krystal

SITC of 23-24 AWG, Cat6 UTP cable Approved Makes: Extron/Kramer/Krystal

SITC of 42U Equipment racks with Fans, PDUs and racks/shelfs as required. Approved Makes: Valrack/Rittal/Middle Atlantic