SPECIAL REPAIRS TO BLDG No. T-230 AND SPECIAL REPAIRS TO BLDG No. T-244 AT BDE CAMP OF RAYANG MIL STN UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) and Removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame), exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description exc. 1.00 Square Metre and not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down/out Unserviceable Rusted/Worn out Wire Cloth/Netting of any description, fixed with Beads, etc., complete all as specified and as directed.

Hacking out Old Broken Glass (any thickness, size, quality or description) from Wooden or Metal Frame or Stone, Concrete or Brick surrounds including hacking out old Putty or removing Beads, etc., punching or drilling out old Glazing Pins/ Spring Clips, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Segregating Serviceable Plain or Corrugated Steel Sheeting and Stacking properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed.

Dismantling Ceiling Frame (Snap Grid) with Hangers (but except Boards) of any descriptions, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Fittings, Segregating the Serviceable Pipes and Fittings, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Fittings, Segregating the Serviceable Pipes and Fittings, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and Setting in Cement Morter 1:6, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appro-priate Items.

M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks of Size 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed.

S&F Flush Shutter 30mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, fixed with Nails, complete all as specified and as directed.

S&F Flush Shutter 35mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, fixed with Nails, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & Gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement, complete all as specified and as directed. NOTE : Builders Hardware will be Measured and Paid seperately under appro-priate Items.

S&F Aluminium anodised Barrel Tower Bolt of Size 125mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt of Size 150mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt of Size 200mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 300mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 100mm, complete all as specified and as directed.

S&F Aluminium Handle of Size 125mm, anodised, Cast type, complete all as specified and as directed.

S&F Aluminium Handle of Size 150mm, anodised, Cast type, complete all as specified and as directed.

S&F Floor Door Stopper with Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue (as approved) anodised, with Hard Drawn Steel Spring, fixed in Floor, complete all as specified and as directed.

S&F Mild Steel Curtain Rails (Harrison Rails) 25mm Outer dia of approved Finished, Fancy type, Vista pattern, fixing with and including Brackets, Stops, Rollers, Side Holders, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel Framed Work as in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for hanging or sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and hanging; also fastening and fixing, conforming to Fe-410-W (Gde E-250), Quality A, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Pre-painted Galvalume Corrugated Steel Sheet, except Sheets (Serviceable Pre-painted Galvalume Corrugated Steel Sheet obtained from BOQ Item No. 1.09 here-in-before) in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Exposed Suspended False Ceiling System with Anodised Aluminium Snap Grid/ Frame Work of Size 605x605mm, all as per Specification and Drawing of MES Schedule (except Hangers), complete all as specified and as directed.

S&F Hangers 6.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 4.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to GI/ Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floors, etc., complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles (1st quality and/or as approved) 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm in Floors, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Virified Ceramic Coloured Tiles (1st quality and/or as approved) 10mm thick (Square/ Rectangular), Light Shade, Polished, Area of Each Tiles not exc. 0.36 Sqm in Floors, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Chequered Cement Concrete Coloured (Terracota Red or Yellow) Tiles 200x200x25mm/ 250x250x25mm thick, Set and Jointed in Neat Cement Slurry in Floors and Pointed in Grey Cement, laid over and including 15mm thick Cement Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Old Painted Asbestos Cement Building Boards/ Cement bonded Particle Boards Surfaces of any description in Walls, etc., over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Old Painted Asbestos Cement Building Boards/ Cement bonded Particle Boards Surfaces of any description in Ceiling, etc., over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Treated Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and Applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

Refixing Old Steel Tubing 15mm bore (dia) and Fittings (Serviceable Pipes and Fittings obtained from BOQ Item No. 1.14 here-in-before) in New/ Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes and Fittings by using Wire Brush including Provision of New GI Fittings (as required/ ordered at Sites), complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

Refixing Old Steel Tubing 20mm bore (dia) and Fittings (Serviceable Pipes and Fittings obtained from BOQ Item No. 1.15 here-in-before) in New/ Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes and Fittings by using Wire Brush including Provision of New GI Fittings (as required/ ordered at Sites), complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type, long Body with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with Long Screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, with Long Shank and Cup (Concealed type) screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing All Water Connections including Lowering/ Taking down Unserviceable Water Storage Tank 1000 Litre Capacity of any description after disconning of all Water Supply Connections, complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Gram, high pressure with Epoxy Coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with PVC (SWR) ‘P’ or ‘S’ Trap, and Fixing Bolts and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F White Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed.

S&F Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated (as approved) and suitable for Wash Down Water Closet Pan (Pedestal Pattern) and Fixed-in-repairs, complete all as specified and as directed.

S&F Toitet Paper Holder of size 150mm (as approved), Brass Chromoum Plated with Rod to hold Paper Roll and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin of size 550x400mm, White (Flat Back) including Brass Chromium plated Waste Fitting 32mm bore (dia), PVC Waste Pipe 32mm/40mm and a Pair of Cast Iron Brackets or Erecting Stand duly Painted (but excluding Taps, Chain, Plug & Porcelain Stopper), Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for connecting with Flushing Cistern, Wash Hand Basin, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium plated Shower Rose 125mm in Size with Arm and Flanges, with or without Swivel Joints including fixing to GI/ Steel Pipe 15mm bore (dia) or Union and Fixed-in-repairs, complete all as specified and as directed.

S&F Soap Dish not less than 150mm in Size (as approved), Chromium plated, Fancy type, fixed on Wall with Wooden/ PVC Cleats and Brass Chromoum Plated Screws and Fixed-in-repairs, complete all as specified and as directed.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixed to Wall with Brass Chromoum Plated Screws on Wooden/ PVC Cleats and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Grating 100mm in dia (as approved) with Waste Hole, setting and Fixing-in-repairs, complete all as specified and as directed.

M&L Cast Iron Floor Trap, Diameter of Outlet in 100mm, Plain with Grating including Jointing with Waste Pipe, Set in Cement Concrete 1:2:4 (20mm graded Aggregate) and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Taking down carefully Copper Point Wiring (Light, Fan, Socket or Power) complete from in any Position including Fixture and Fittings such as Switches, Sockets, Regulators, Pendants, Ceiling Roses, Buzzers but excluding Light Fitting of any type and description, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 and Providing Surface Treatment (White/Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down Unserviceable Sub-main Wiring from PVC Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 and Providing Surface Treatment (White/ Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down unserviceable Service Connection Cable/ Wire and connected Items of any description from any Situation, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable with 1.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded single core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated unsheathed multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3/5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable with 1.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable with 2.5 Sqmm (nominal area) FRLSH 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) FRLSH 1100 Volt PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) FRLSH 1100 Volt PVC insulated unsheathed multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wires required for Looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

S&F PVC Rectangular Board/Block of Size 175x100x50mm Deep, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Rectangular Board/Block of Size 200x150x50mm Deep, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 5 Pin 6 Amp, Multi-plug, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 5 Pin 6/16 Amp, Multi-plug, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Lamp/ Angle Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up, complete all as specified and as directed.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator 230 Volt AC, Rotary Stepped Electronic type 120/280 Volt and connecting up, complete all as specified and as directed.

S&F Bell Push 6 Amp, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Buzzer Ding Dong, Single Pole, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F LED Bulb 10 Watt (as approved), 230 Volt, suitable for fixing in Normal Pendent/ Batten Holder and Fixed-in-repairs, complete all as specified and as directed.

S&F LED Light Fitting 1x9 Watt/1x10 Watt Bulkhead Luminaires including LED Light, Driver, Holder, Connecting up with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length from Ceiling Rose upto Light Fitting and Fixed-in-repairs, complete all as specified and as directed.

S&F LED Light Fitting 12 Watt, Round Shape, 220 Volts AC, Recessed type with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Drivers, Holders, LED Lamp suitable for Roof Ceiling, Connecting up with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length from Ceiling Rose upto Light Fitting and Fixed-in-repairs, complete all as specified and as directed.

S&F LED Light Fitting 18 Watt/20 Watt, 4.0 Feet long, 220 Volt, AC Decorative Box type with Driver, Holder, LED Tube 18 Watt/20 Watt, Connecting up with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length from Ceiling Rose upto Light Fitting and Fixed-in-repairs, complete all as specified and as directed.

S&F LED Luminaire 300x300mm, 15 Watt/16 Watt, 220 Volt AC, Recessed type Unique Slim with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders & LED Lamps suitable for Roof Ceiling, Connecting up with and including Twisted Copper Conductor Flexible Cable, Twin Core of suitable Size and Length from Ceiling Rose upto Light Fitting inclduding Cutting to Existing Ceiling as required/ordered and Fixed-in-repairs, complete all as specified and as directed.

S&F LED Luminaire 600x600mm, 24 Watt/26 Watt, 220 Volt AC, Recessed type Unique Slim with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders & LED Lamps suitable for Roof Ceiling, Connecting up with and including Twisted Copper Conductor Flexible Cable, Twin Core of suitable Size and Length from Ceiling Rose upto Light Fitting inclduding Cutting to Existing Ceiling as required/ordered and Fixed-in-repairs, complete all as specified and as directed.

S&F LED Luminaire 600x600mm, 35 Watt/36 Watt, 220 Volt AC, Recessed type with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders & LED Lamps suitable for Roof Ceiling, Connecting up with and including Twisted Copper Conductor Flexible Cable, Twin Core of suitable Size and Length from Ceiling Rose upto Light Fitting inclduding Cutting to Existing Ceiling as required/ordered and Fixed-in-repairs, complete all as specified and as directed.

M&L Taking down Ceiling Fan, Exhaust Fan of any Make and Sweep from any Height after disconnecting Electric Connection and Keep in Safe Custody for Re-fixing / Re-hanging, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1200mm Sweep from the Site of Work at RAYANG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (not less than 350 Gram) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Re-hanging/Refixing only Ceiling Fan, Exhaust Fan (obtained from BOQ Item No. 2.27 here-in-before) and connecting with and including suitable Size Twisted Flexible Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed.

S&F Wall Fan 300mm Sweep, 1360 RPM, Single Phase, 45 Watt, 230/240 Volt with Fixing Arrangement using Fastener including Taking down Unserviceable Wall Fan of any description from any Situation and Removing to AGE E/M Store Yard at RAYANG, complete all as specified and as directed.

S&F Sheet Metal Enclosure with Socket Plug Top, Single Pole & Neutral with a 2-Pin and Earth Plug and Socket with and including 1 No. MCB Single Pole, 20 Amp, 240 Volt, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 6 Amp to 32 Amp, Single Pole with rating 240 Volt, 10 KA 'C' Curve, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 10 Amp to 32 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 40 Amp to 63 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt, providing Electric Connection and Fixed-in-repairs, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-Way, SPN, 240 Volt, Single Door, Epoxy Based Powder Coated Painted, suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going with 200 Amp rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and connecting up including Taking down/out unserviceable MCB DBs of any description, complete all as specified and as directed.

Supply & Laying or Passing through Pipe 1100 Volt grade heavy duty, Cross-sectional Area 16 Sqmm, 2 Core, Flat or Circular Cable with PVC insulated Aluminium Stranded Conductor served with an Inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed in Service Connection suspended by insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/ out Old Unserviceable Earthing of any description, complete all as specified and as directed.

M/S Abhi Traders

M/S D P BERLIA

SAHASRA CONSTRUCTION

D. D. Construction

M/S CHANDAN ENTERPRISE

jitendra narayan goswami

M/S. NOBIN RAJKHOWA

FREEZCON

M/S BORAH BROTHERS

MAZUMDAR ENTERPRISE