SPECIAL REPAIRS TO BLDG NO MES 19 IN MES COMPLEX AT DFRL MYSURU UNDER GE I R D EAST BANGALORE

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down and removing to or from store chowkats or frames not exc 1.5 sq. m each but with shutters (without taking off shutters from the frames)

Taking down and removing to or from store chowkats or frames exc 1.5 sq. m and not exc 4 sqm each but with shutters (without taking off shutters from the frames)

Taking down steel window shutters of any description,any size by cutting out hinges and making good the surface along with removing steel frame.

M&L Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipes in 15 mm

M&L Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipes in 20 mm

M&L Dismantling water tanks and removing to store exc 250 and n exc 500 litres in capacity

Taking down existing water proofing treatment on roof such as tar felt etc and removal of rubbish complete all as directed. Note : Bedding and PCC of any thickness shall be measured under appropriate item

Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of Concrete of any description and in any position not otherwise specifically provided for

Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided for

Dismantling boarding, any description, fixed in any position with screws

M&L Rendering 15 mm thick in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even and smooth (without using extra cement)

M&L Rendering 15 mm thick in CM 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even and smooth (without using extra cement) mixed with WPC 3% by weight of cement. (Note: WPC will be measured and paid seperately )

M&L rendering 5 mm thick in CM 1:3 on ceiling, surfaces to be finished even and smooth without using extra cement.

S&F Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs ,hinges ,lock strike plate etc, complete, as specified, supplird and fixed

S&F Pressed steel frames 105x60 mm for doors with one or more rebates including necessary fixing lugs ,hinges ,lock strike plate etc, complete, as specified, supplird and fixed

M&L Providing precast cement concrete 1:3:6, type C1, set in CM 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),bed plates, pintle blocks, filling back of steel door frames etc complete.

S&F 18/19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F II nd class HW Plain framed, panelled factory made shutter of 35 mm thick (two panel) with lock rail and and panel of 12 mm veneered particle board with commercial veneering on both faces.

M&L Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a); supplied and fitted to chowkats 1st class hard wood 30mm

S&F Solid PVC door frame of size 50mm x 47mm made ot of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' chnnel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Aluminium powder coated of any colour (Thickness or powder coating not less than 50 micron.) window and ventilator shutters, side hung type /sliding type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2 No) suitable handle (1 No.) , rollers, locking arrangements etc complete all as specified.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane thickness in 4 mm

S&F figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane thickness in 4 mm

S&F auto concealed hydraulic steel spider/butterfly hinges suitable for cupboards complete all as directed.

S&F 100mm size handles of stainless steel fixed with screws complete all as specified.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F 100 mm Hasp and staple, safety type,steel with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed size of hinges in 100 mm

S&F aluminium alloy, anodised, sliding door but with hasp, staple (boly type) and fixing clips of sheet, cast or extruded sections sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed length of bolt in 300mm

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed length of bolt in 150 mm

S&F Aluminium handles, cast type, anodised size of handle in 150mm

S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete

M&L Cement concrete 1:5:10, type E2 as in filling in sunken floor, foundations, filling and mass concrete

S&F in repair PVC (SWR) pipes of 75mm bore single socketed, in any length with rubber ring joints, fixed to wall

S&F in repair PVC (SWR) pipes of 110mm bore single socketed, in any length with rubber ring joints, fixed to wall

S&F 75 bore PVC (SWR) vent cowl

S&F 110 bore PVC (SWR) vent cowl

S&F 75mm dia PVC (SWR) bends any radius

S&F 110 mm dia PVC (SWR) bends any radius

S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S&F PVC(SWR) multi floor trap plain with gratting 75 mm dia

S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

S&F Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S&F Ball valves of 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210 gms)

M&L Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe in 20mm dia and fixed

M&L for cutting chases in walls, floors, etc.and making good for concealed pipe work

M&L Unplasticised PVC pipes of pressure rating 10 Kgf/cm fixed complete to walls, ceilings or in floors etc, any types of pipe outer dia of pipe in 16 mm. (Concealed type)

M&L Unplasticised PVC pipes of pressure rating 10 Kgf/cm fixed complete to walls, ceilings or in floors etc, any types of pipe outer dia of pipe in 20 mm.

S&F long body Bib taps, fancy type chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore dia

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed 15 mm bore dia

S&F Angel cock 15 mm bore, fancy type, chromium plated with long shank and cup, cast copper alloy, screwed down, high presure, and fixed

S&F stop cock cock 15 mm bore, fancy type, chromium plated with long shank and cup (Concealed type) cast copper alloy, screwed down, high presure, screwed both ends for iron pipe or for unions and fixed

Providing and fixing C.P. brass health faucet with all accessaries as per the direction of Engineer-in-charge.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe.(minimum weight 40gms)

S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm

S&F in repairs wash basins, vetreous china (flat back ) size 550x400 mm including cutting for and pinning in ends of brackets or erecting stand supply and fixing of coupling and waste pipe including brackets

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white fixing, with flshing cistern and flush pipe with fixing with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mmx420 mm bowl size 410 mm x 330mm x 160mm

S&F Stainless steel plate rack of 0.63mm thick sheet, size 600mm x 750mm complete all as specified and directed. Make: Blue star,NIRALI / ANJALI / JAYNA / DIAMOND.

S&F PVC down pipe to basins and sink including CP nut fixed to waste coupling

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc

S&F wooden round block for fixing curtain rod brackets

S&F Aluminium anodised tubular towel rail 20 mm dia, D type, 60cm long between flanges

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

M&L PCC type C1, 1:3:6 using 20mm graded aggregate 75mm thick as in plinth protection by Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre

M&L PCC 75mm thick type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base.

M&L Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4.

M&L Rendering 15 mm thick for laying wall tiles in CM 1:4 on stone masonry surfaces or surface other than fair face of brickwork

M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specfied and directed.

M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting/dados etc. set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specfied and directed.

M&L granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement (1:2) using marble dist with admixture of pigment to match with shade of granite 20 mm thick including moulding of edges.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Glazed ceramic coloured tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

M&L Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment.

M&L Pre-cast cement concrete block masonry with solid blocks,in 1:3:6, Type C1, exc. 10 cm in width and setting in mortar 1:6,complete

M&L RCC type B-1, 1:2:4 (20 mm graded stone aggregate) for chajjas, slab etc complete

M&L TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to

M&L Formwork rough finished surface of concrete to chullah hoods, chajjas, shelf, troughs and similar items incldung edges

S&F Hand rails, half round or other stock section ,balusters, nosing to steps including embeding in concrete and screwing etc. including all necessary drilling, bolting or riveting, etc.,and similar work

M&L Brushing neat cement slurry with 3.0kg of cement per sq. metre

M&L for PCC 1:2:4 type B0 (Using 12.5mm graded crushed stone aggregate) as in padding concrete for levelling and coving etc complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:4 on concrete surfaces of roof/wall mixed with WPC 3% by weight of cement.(WPC will be measured and paid seperately) surface to be even and smooth with out using extra cement.

Supply only integral water proofing compound.

M & L for applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm as binding material and provide modified polymeric five layered APP (Atactic Polypropylene modified Polymeric) membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) complete all as specified and directed by Engr-in-Charge. Make - M/s Sika India Pvt Ltd( Sika WP Shield 103/104, M/s Fosroc Chemicals ( Proofex Tochseal 3 PI), M/s STP Ltd ( Super Thermolay APP PL/MT), M/S IWL India Ltd ( Hyperplas Brand Fibreglass, M/s Tiki Tar Danosa (India) Pvt Ltd ( ''HUDROSTOP' ). Make of Primer - M/S STP Ltd ( Shali Tex Primer), M/S Tiki tar Ltd( WB & OB & Tiki Flash.

M&L painting to steel and iron surface applying two coats of sythetic enmal paint over one coat of primer including peparation of surface

M&L painting to wood or wood based surface applying two coats of sythetic enmal paint over one coat of primer including peparation of surface

M&L applying two coats of Exterior emulsion paint over a coat of primer on wall surfaces including preparation of surfaces all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima).

M&L two coat of oil bound distemper over one coat of primer over chalk whiting on plaster surface of wall including prepration of surfaces.

M&L two coat of oil bound distemper over one coat of primer over chalk whiting on plaster surface of ceiling including prepration of surfaces.

Removing debries exc. 1.50 km but n exc. 5 km and depositing where directed

M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors.

M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area.

Taking down carefully existing copper / aluminium point wiring (Concealed / surface) light/fan, socket or power complete including fittings and fixtures such as switches sockets ceiling roses pendants regulators light fittings etc removing to store for safe custody or for taking credit and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring complete with FRLS PVC insulated unsheathed cable 1100 volt grade confirming to IS694-1990, 1.5 Sqmm ( Nominal Area) multistranded copper conductor drawn through and including non metallic rigid PVC condiut medium gradeof min 20 mm dia (ISI Marked) and conduit accessories concealed in wall / ceiling /roofs /floors etc with modular terminal box and modular white cover plate with frame for mounting switches, regulators , socketsout lets bell push etc including provision of 1.5 sqmm single core multistranded copper condutors as earth continuity conductor connected to earth dollycomplete all as specified and directed for

(a) One light point controlled by one switch.

(b) One light point controlled by Two Nos of 2 way switch

(c) One fan / exhaust fan point controlled by one switch.

(d) One bell point controlled by one bell push

(e) One three pin 5amps sockets outlet on the same board

(f) One three pin 5amps socket outlet on the independent board

All as per item No 104 here in before but for one socket out let 2 in 1, 5 and 15 Amps with 4 Sqmm PVC copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

Supply and fixing Modular switch 6 Amps 230 volts single pole one way complete all as specified and as directed.

Supply and fix modular switch 6 Amps two way complete all as specified and as directed.

Supply and fix modular switch 16 Amps two way complete all as specified and as directed.

Supply and fix ceiling rose 2 to 3 terminal bakelite compelte all as specified and as directed.

Supply and fix angle holder PVC with PVC square box complete all as specified and as directed.

Supply and fix modularbell push 6 A ,230V complete all as specified and as directed.

Supply and fixing modulars sockets outlet 6 Amps, 2/3 pin 230 volts fluse type complete all as specified and as directed.

Supply and fix switch socket combination 2 in one, 5 and 15 Amps flush type complete all as specified and as directed.

Supply and fix call bell ding dong type complete all as specified and as directed.

Supply and fixing moudler stepped type electronic fan regulator flush type 100 watts 230 voltas

Taking down / removing of unsericeable main switches /MCB DB / MCB's and supply and fixing of following including making good the disturbed surface to match the existing wall and making necessary connection with suitable size copper wire complete all as specified and as directed.

(a) MCB DB single door type single phase with common earth and neutral bus and 100 amps copper bus bars complete, 240 volts, 08 way

(b) All as per item No. 123 above but 6 way, 3 phase, 415 volts

Supply and fix in replacement MCB SP 10 KA 250V, 'C' series of capacity 6-32 amps

Supply and fix in replacement MCB DP 10 KA 250V,'C' series of capacity 10-32 amps

Supply and fix in replacement MCB TPN 10 KA 415V, 'C' series of capacity 100 amps

Taking down submain wiring any type complete, Material and labour for sub main wiring complete with 2 runs of 6 sqmm PVC insulated and unsheathed FRLS cable with multi stranded copper conductor, including 2 1 run of 6 sqmm PVC insulated un-sheathed copper conductor cable green colour as continuous earth continuity conductor.

Supply and fix surface and wall mounted LED Light fitting of cap 20 Wattsbattern extruded alumiinium housing provided for efficient heat dissipation with poly carbonate diffuser integrated electronic driver ENDURA linear NEOBS20W LED 830 SPCWH as specfied and directed Make havells/CG/Philips

Supply and fixing angle holder PVC with PVC Square box complete all as specified and as directed

Supply and fixingLED bulb 9 Watts make CG, Havells, Bajaj and Philips

Supply and fixing of LED building security light 30 Watts Make CG Modle Cat No LSTS - 30 CDL or Equivalent in Haveels, Bajaj, Philips

Taking down ceiling fan/Exhaust fan of any size and refixing the the same after painting and writing MES No inculding provision of flexiable copper wire from celing rose to fan connectore complete all as specified and as directed.

Earthing complete with GI earth plate electrode 60x60x6mm size buried directly in ground with bottom edge of the plate not less than 2.25 meter below normal ground level and connected to GI earth lead of size 4mm dia as earth lead by means of nuts bolts etc with and including earth lead up to 7.5 RM including necessaey exacavation earth chamber with plain cement concrete 1:3:6 type C-1 necssary reinfofced cement concrete chamber cover in cement concrete 1;2;4 with normal reinforcement, funnel etc all as shown in electrical plate No 3 of SSR part 1 including excavation in any type os strafta and connected to earthing test point including testing on completion all as specified and as directed.

SREE BUILDERS

SAPTHAGIRI CONSTRUCTIONS

Power and Telecom Systems

M/S Sneha Enterprises

Moulya Builders

ARATHEERTHA CONCEPTS

Meghana and Gowda Enterprises

RAHUL ENTERPRISES