REPAIR TO ROADS, ROAD BERMS, PAINTING AND ROAD FURNITURE TO EAST AND WEST SOLAPUR HIGHWAY AT MIC AND S UNDER GE (S) AHMEDNAGAR

Amount

M&L Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sq.m, putting in pre mix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with sand seal coat (6.8 kg of binder with 0.60 cum of sand) again well rammed (including supply of pre mix binder and sand) depth of pot holes not exc 30mm and using paving bitumen VG-10 all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surface in area n exc 400 sqm exc 50 mm and n exc 100 mm thick.

M&L for 75 mm thick (compated thickness) Wet Mix Mecadam grading (WMM) grading as per table 400-13 of MORT&H specification,for road and bridge works 2013manufactured in WMM Plant material comprising of clean,crushed, graded aggr. and granular material premixed with water to a dense mass , sreading with sensor paver and rolling with vaibrator roller of capacity 80 to 100kn static waight and consolidatiating to required gradient and and camber complete all as specified and as directed by Engineer-in-Charge

M&L for preparing WBM/WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @7.50 Kg per 10 Sqm complete all as specified and directed.

M&L for premix bituminous macadam( consolidated thicknes 75mm or less) with 4 % binder content using paving bitumen of VG-30 grade by weight of total mix laid/rolled and compacted to required camber and gradient complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @2.50 Kg per 10 Sqm complete all as specified and directed.

M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.00% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen of penetration VG-30, layed to required camber and gradient with mechanical paver and rolled to a uniform smooth surface all as specified and directed

M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.0% binder content of which (paving butimen VG-30 grade @ 92% and 8% plstic waste) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. NOTE: Premix bituminous ashalitic dense concrete shall be obtained from hot mix plant and spreading shall be done with mechanical paver.The shraded plastic plastic will be mixed with aggregates before before transfereing into hot cylinder.Aggregates will be coated with plastic firstly and lateron with bitumen.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.0 mm thick single coat as a centre line or edge line etc, road marking n exc100 mm width using thermo plastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturer's instructions and complete as all specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20 mm with PAMA strplens relector of model No DA 972.0 fixed with and incl MS stud of of suitable size as per manufacturers instructions. Make 3M/Green lite

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite

S&Fretro reflective direction/sign board 900mm made pot of aluminium coposite material (ACM) of 3mm thick mounted on 65mm x 65mm x 4mm hollow section and height of 1.8m upto top of the board above GL and inserted in PCC 1:2:4 type B-1 using 20mm graded coarse stone aggregates of size 0.3 x 0.3 m x 0.45m below GL whole board covered with 3mm ACP sheet and digitally approved of board from Engr-in-Charge before planing of order all as specification and as directed by Engr-in-Charge

S&F Unbreakable (2Nos 18 Inch dia) convex mirror / security mirror/ traffic mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts) ISO Certified 9001:2015, mounted on 65mm x 65mm x 4mm hollow section and height of 1.8m upto top of the board above GL and inserted in PCC 1:2:4 type B-1 using 20mm graded coarse stone aggregates of size 0.3 x 0.3 m x 0.45m below GL , complete all as specified and directed by the Engr-in-chagre..

Galaxy Construction

M/S Anil Enterprises

M/s S. R. Constructions

SANJAY B SHARMA