Certain repair to boundary wall, fencing, path, garbage bin, drain and MES installation under AGE B/R-I at Tibri Mil Stn.

Amount

Dismantling posts or struts embedded in natural graund (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

All as per Ser item No 02 above but embedded in concrete foundation.

Excavation in post holes (or similar holes) each not exc. 0.5 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus spoil to a distance not exc. 50 m and making good surface in soft / loose soil complete all as specified and directed.

Demolition concrete of any description and in any position not otherwise specifically provided for and disposal of the rubbish complete all as specified and directed.

M & L for PCC (1:4:8) type C-2 with using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed

S&F in repair galvanised 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any standard rails straining bolts including securing or tying at crossings with provision of Galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

Restraining and resecuring including making good staples of old serviceable barbed wire in position.

M&L for mild steel angles ,flat iron as in post and struts in fencing as directed incl drilling holes, notching for wire etc conforming to Fe-290 Gde E-165) etc complete all as specified and directed by Engr-in-charge.

M&L for mild steel bolt factory made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square nut exc 5cm and not exc 10cm long end dia neck 16 to 20mm etc complete all specified and directed by Engr-in-charge.

S&F Mild steel round bars (Fe-410-0 or Fe-310-0), 10 mm dia and over as in chain link fencing, fixed to concrete post with mild steel nuts, bolts and washers and tying to GI chain link fencing with 2mm dia GI wire complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description exc. 10 cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

All as per Srl item No 12 above but n. ece 10cm width

S&F galvanised mid steel wire chain link fencing mesh of size 75x75x4 mm dia including line wires fixed with angle iron fencing post including binding wire complete all as specified and directed.

M&L for pre-cast RCC (1 : 1½ : 3) type A-1 with using 20mm graded stone aggregates as in fencing post / struts of average sectional area exc. 100 Sqcm but not exc. 250 Sqcm including necessary form work and erecting the post in position complete all as specified and directed

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Taking down cement plaster of any description on brick wall or concrete surfaces including raking out joints in brick work, hacking for key, srubbing down with water etc complete all as specified and directed.

Demolition of brick work, in any position built in cement mortar, complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' brick straight curved on plan exc 6m mean radius built in CM 1:4 as in manholes etc complete all as specified and directed.

All as per Srl item No 19 above but except bricks.

M&L 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick cement plastering in CM 1:6 on other than fair faces brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick, on concrete surfaces in ceiling, chaja, parapet , fasia etc at any height in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M & L for two coats of cement based paint on new plastered wall surfaces over one coat of white wash including preparation of surfaces complete all as specified and directed.

M&L for three coats white wash on newly plastered ceiling surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade) on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M& L for one coat of white wash on old treated ceiling surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces on wall and applying two coats of oil bound distemper complete all as specified and directed.

M & L two coats of cement based paint on old plastered wall / concrete surface height up to and including 25.0mt in any shape or size including complete removing existing treatment on surfacse complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate as in coping, bands etc like incl weathering, slightly rounded or chamfered throating as directed incl form work (straight or curved) and finish all exposed surface facing of concrete complete all as specified and directed.

M&L PCC 1:2:4 type B-2 using 40 mm graded stone aggregates as in surface channels and drains complete all as specified and directed.

M&L for 60 mm thick PCC (M-35) factory made coloured interlocking tiles/ paver block of shape/ size as IS marked, laid , complete all as specified and as directed by Engr-in-Charge. Note :- Sand will be paid under relavent item.

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors, including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for 75 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floorcomplete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor & paving n.exc 15cm ground level complete all as specified and directed.

S&F welded steel wire fabric supplied and fixed complete to wood or steel members weight n. exc 4.0 kg per sqm complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable files to store yard and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M& L non skid dark coloured ceramic tiles 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic dark colour tiles of sizes 300x200x7mm thick on vertical surface over 10mm rendring in CM 1:4 complete all as specified and directed.

M&L prepartion of old painted surface of wood & wood based surfces of any decsription not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new painted wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair WC water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap (excluding flush pipe and flushing cistern) all as spd but fixed in repair complete all as specified and directed.

M&L PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repair complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in reapir 20 mm ball valve high pressure of PTMT with eposy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 20mm 210 gms) as spd

S&F in repair wash hand basin of size 450 x 300 mm with 32 mm dia waste coupling and waste pipe including 15 mm CP pillar tap CI bracks complete all as specified and directed.

S&F in repair 15 mm stop cock screwed to iron pipe CP concealed type with long shank and capstan head for (Bath shower) in repair complete all as specified and directed.

S&F in repair 15mm dia bib taps, cast iron, screwed for iron pipe and fixed screwed,for iron pipe complete all as specified and directed.

S&F in repair stop valve 15mm bore PTMT any colour high pressure screwed ffir firon pipe and fixed. etc complete all as specified and directed.

S&F rotational moulded polytheylene triple layer white water storage tanks of capacity 500 ltrs(cylindrical vertical with closed top) hoisted and fixed in position including dimolition of existing water tank complete all as specified and directed.

S&F rotational moulded polytheylene triple layer white water storage tanks of capacity 1000 Litters(cylindrical vertical with closed top) hoisted and fixed in position including dimolition of existing water tank complete all as specified and directed.

Taking up and down GI pipe 15mm bore including fittings, connection, including cleaning for reuse or removal to store complete all as specified and directed.

All as per srl item No 55 above but 20mm bore of pipe.

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and directed.

All as per item No 57 above but 20mm bore of pipe ISI marked complete all as specified and directed.

S&F in repair steel window 1.25mm thick box type(primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises guaged skelton & glazed shutter including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1(four Nos for each window) including following fitting welded to frame shutter:- (i)Hold fast,150mm long of 12mmX3mm made to shape-04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-o1Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/06 (vii) M S guard bar 12mm square bars @ 60mm C/C fixed horizontlly.

M&L for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 incuding cutting holes and taking down old steel ventilator complete all as specified. NOTE : Sheet glass and painting shall be measured and paid Separately.

S&F sheet glass 3mm thick ordinary quality , fixed with oil putty metal frame complete all as specified and directed.

All as per Srl item No 61 above but pin headed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats and removing to store as spd

All as per Srl item No 65 above but exc 1.50sqm but n.exc 4 Sqm

Taking down shutter of any description exc 1 sqm and n exc 1.5 sqm each complete all as specified and directed.

S&F pressed steel frames 1.25 mm thick for door size of frame 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) and for filling of hold fast and tarring to inner surface in contact with concrete/brick surface of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer and preparation of surfaces complete all as specified and directed.

All as per Srl item No 68 above but 125 x 60 mm.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing on page 160 of SSR Part-II and as per manufacturer's instructions.

S&F factory made solid PVC panneled door shutter 28 to 30 mm thick (stiles) with 2 raised panel design with 2mm thick moulded prelim PVC sheet on the fron faces and 2mm thick plain colour PVC sheet on back face all as spd and shown as drg with wood free EPS complete all as specified and directed.

S&F flush shutters 30 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30mm thick glazed & skelton shutter of 2nd class hard wood (Hollock) open rebated and prepare to receive the glass, gauge etc (without sash bar) edges plain chamfered or rounded fitted with cut and mitred beeds for securing gauge etc complete all as specified and directed.

S&F aluminium anodized barel; tower bolt of extrud sec 150mm long ISI marked complete all as specified and directed.

S&F aluminium alloyed handle fabricated type anodized of size 125mm long ISI marked complete all as specified and directed.

S&F but hinges med weight cold rolled mild steel 100mm size complete all as specified and directed.

M&L for aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast cover slab of drains'cover slabs of manholes and similar article and setting in CM 1:6 including necessary form work etc complete all as specified and directed.

M&L for cement concrete type C-2 (1:3:6) (40mm graded aggregate) as in plinth protection as thickness of 50mm even and smooth surface without using extra cement complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed,110 mm bore in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) bends fixed to PVC (SWR) pipe with rubber ring complete all as specified and directed.

M&L for 100 mm thick, PCC (1:2:4), type B-2 (using 40 mm graded stone aggregate), as in floor complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and Labour for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1 : 2 : 4) using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of Finishes to match with the existing surfaces in at any height complete all as specified. Note: - Cost of formwork and welded mesh, bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor.

Demolition of cement concrete in any position not otherwise specifically provided for above ground floor complete all as specified and directed.

M&L cement conctete 1:2:4 type B-0 using 12mm graded stone aggregate as in roof padding avg 50mm thick complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerb complete all as specified and directed.

M&L for applying evenly bitumen primer for use in water proofing and damp proofing treatments complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L for 10mm thick cement plaster in CM (1:4) using WPC on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 3mm thick reinforced with polyster non wove favric APP polymeric membrance of weight not less than 3.0 kg/sqm torch shield using gas burner including 150mm side/ laps over bitumen primer @ 0.3 kg/ sqm complete all as specified and directed by Engineer-in-Charge. Note :- (i) Bitumen primer shall be measured and paid separately. (ii) Roof treatment and sunken portion.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type thickness of lathe 1.25 mm complete all as specified and directed.

S&F Ball bearing for rolling shutter complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed.

M&L one coat of cement based paint on old decorated wall surfaces including preparation complete all as specified and directed.

M&L for half brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for kayed pointing to brick walls in CM 1:4 complete all as specified and directed.

M&L for raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels , roof etc in CM 1:4 complete all as specified and directed.

KAILASH CONSTRUCTION CO