REPAIR, REPLACEMENT OF JOINERY, ALUMINIUM WINDOW, AND ALUMINIUM PARTITION, FALSE CEILING, FLOOR TILES AND WALL TILES ETC IN CERTAIN BUILDING INSIDE TECHNICAL AREA DMSRDE, KANPUR UNDER GE (I) R and D KANPUR.

Amount

Taking down wooden cupboards/aluminium partition wall any description n exc 1 sqm each panel complete all as specified and directed of frame with shutters (without taking off from the frame) area etc 1.5 sqm but not exc 4.00 sqm complete all as specified and directed.

M&L fully glazed cupboard with openable shutter having powder coated aluminium section of size 50x44.45x2mm thick for frame and section for shutter 40x25x1.5mm thick 4.8mm thick plain/figured glass sheet with necessary jointing cleats, glazing clips, rubber packing, aluminium and rubber beading, mortice lock of brass of size 65mm, vertical type four levers, aluminium hinges of size 75mm, 125mm long aluminium handle fabricated type including proper fixing aluminium frame with screw and PVC gully of adequate size as per requirement of site complete all as specified and directed(Note : colour of powder coating and glass will be approved by GE(I))

M&L for 15 micron natural colour having powder coated aluminium section partition partially panelled area of each panel not n exc one sqm with section 38mmx63.5mmx1.50mm including necessary joints cleats, glazed clips rubber packing screw 4.8mm thick plain/tinted glass two numbers upper panel and 12mm thick prelaminated particle board BWA type molamine finish (both side) on bottom panel (0.80mm height) including necessary fittings etc complete all as specified and directed (Colour of glass shall be approved by GE (I) R&D Kanpur)

Taking down chowkhats of frames (wooden/alumiunium) with out taking off shutters from the frames) area etc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed.

M&L for 15 micron natural colour having powder coated aluminium section door frame 101.60mmx44.50mmx3.0mm with top rail 100.60mmx44.45mmx2.9mm bottom and lock rail 150mmx44.45mmx2.9mm and stiles 85mmx44.45mmx2.9mm including aluminium snap beading of size 19.05mmx17.27mm necessary jointing cleats, glazing clips, rubber packing, screw and 4.8mm thick plain/figured glass on panels including necessary fittings such as round type handle 125mm size including floor spring (ISI mark) locking arrangement (mortice lock), 03hinges of size 125mm aluminium anodised medium grade in each complete all as specifed and directed (Colour of glass shall be approved by GE (I) R&D Kanpur)

S&F in repair door closer hydraulically regulated (aluminium dia cast) designation No 3 universal type suitable for door shutter of 851 to 1000mm width and of wt between 61to 80 kg complete all as specified and directed.

Dismantling of ceiling boards and wall (fibre, insulation etc or perforates/insulation boards any thickness, including cover fillets etc complete all as specified and directed.

S&F anodised aluminium snap grid 605x606mm frame work of angle 25mmx25mmx1.5mm and main tee 38mmx26mmx1.5mm for false ceiling complete all as specified and directed

M&L for providing and fixing 9mm thick PVC laminated gypum board in ceiling fixed and screws as per manufacturer instructions for any height upto and including complete all as specified and directed

S&F hanger 4mm GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

Taking down cement plaster / dado from brick wall or concerete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finish even and fair without using extra cement complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls including cornices plaster etc by complete removal of existing treatment and applying two coat of oil bound distermper complete all as specified and directed.

M&L for 1mm thick birla wall care white putty or JK wall care putty on new or old surfaces complete all as specified and directed.

M&L for 15mm thick base plaster in cement mortar (1:4) sunken portion/roof etc admixing "Dr Fixit Pidiproof" @ 200ml per bag of cement complete all as specified and paid seperately as supply only)

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

Taking down chowkhats of frames (wooden/alumiunium) with out taking off shutters from the frames) area etc n exc1.5 sqm complete all as specified and directed.

M&L for 15 micron natural colour anodised aluminium cum glazed side hung window shutter section 50.12mmx44.45mmx2.0mm and aluminium section 38.00mmx63.50mmx1.5mm including aluminium snap beading of size 19.05mmx17.27mm necessary jointing glazing clip rubber packing screws and 4.8mm thick plain/tinted/coloured glass etc and necessary fitting aluminium stay 300mm long complete all as specified and directed.

M&L for aluminium anodised grill for aluminium window the design size and spacing 65x75mm or directed by GE of aluminium member shall be as per DECO grill DG-916, 6mm thick complete all as specified and directed.

S&F for 15micron natural coloured aluminium section ventilator fully glazed with section 38mmx63.5mmx1.60mm including necessary joints cleats, glazing clips rubber packing screw 4.8mm thick colured/white/tined glass etc complete all as specified and directed.

M&L for extruded aluminium alloy handles125mm size, fabricated type, anodised complete all as specified and directed.

M&L for butt hinges in 100mm size, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed type C-21 complete all as specfied and directed.

M&L for aluminium in150mm in size, barrel tower bolts and extruded section and fixed complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floor, apron etc laid and pointed in any mortar, complete all as specified and directed.

Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillar, window cills and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marbles of any shade other than white and black complete all as specified and directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for sheet glass 3.0mm ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each panes complete all as specified and directed.

M&L for sheet glass 4.80mm ordinary quality and glazing with oil putty in square exc 0.5 sqm in each panes complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 300mmx450mmx7mm thick set and jointed in neat cement slurry over a 10mm thick rendering in CM 1:4 etc set and jointed in neat cement slurry and pointed in white and coloured cement to match complete all as specified and directed. (Colour, design and pattern shall be approved by GE (I) Make M/s Somany Pikington Limited (Haryana)/Orient/Johnson(India) Private Limited as approved by GE(I)

M&L vitrified ceramic tiles 10mm thick light shade (Square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor over 15mm thick screed bedding in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.(Colour, design and pattern shall be approved by GE (I) Make M/s Somany Pikington Limited (Haryana)/Orient/Johnson(India) Private Limited as approved by GE(I)

M&L vitrified ceramic tiles 10mm thick light shade (Square/rectangular) polished area of each tiles not exceeding 0.36 sqm for work on vertical surfaces such as skirtings, dados and risers to steps etc floor over 15mm thick screed bedding in CM 1:4 etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.(Colour, design and pattern shall be approved by GE (I) Make M/s Somany Pikington Limited (Haryana)/Orient/Johnson(India) Private Limited as approved by GE(I)

M&L for non skid ceramic coloured tiles printed 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm as in floors etc; set and jointed in neat cement slurry and pointed in white cement bed CM 1:6 complete all as specifed and directed.

U.R ASSOCIATES

M/S UNIQUE ENTERPRISES