Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC A 1504 UNIVERSAL CUBICAL CTS NO 288A AND 292 BANDIVALI VILLAGE AMRUT NAGAR JOGESHWARI WEST MUMBAI 400102 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400102 | ₹16.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹17.8 LRejected-Finance B2 302 SAHYOG TOWER KAUSA TALAV PALI ROAD KAUSA THANE MAHARASHTRA 400612 | THANE | THANE | MAHARASHTRA | 400612 | ₹17.8 L | L2 | Rejected-Finance Not L1 |
| 3 | L3₹19.4 LRejected-Finance | ₹19.4 L | L3 | Rejected-Finance Not L1 |
| Sl No | Description | Qty | Unit | S.S. Enterprises L2 | IK CONSTRUCTION COMPANY L1 | Radhe Krushna Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | Civil Works | 1 | LS | 15,09,400 ₹17.8 L | 13,55,300 ₹16.0 L | 16,47,725 ₹19.4 L |
| 2.00 | SITC of 4Nos concealed Split AC | 1 | LS | - | - | - |
| 3.00 | Electrical & Shifting Works | 1 | LS | - | - | - |
Tender Value
Refer Docs
EMD Value
₹65,800
Closing Date
20 Mar 2026, 2:00 pmClosed
Dy GM PPMM
OLD AIRPORT SANTACRUZ EAST MUMBAI 400029
Shifting of COD to Hanger 1 west ancillary building at AIESL Engineering premises OAP Santacruz East Mumbai 400029
2026_AIESL_268999_1
AIESL/BOM/MMD/EFD/PFD/008
Open Tender
Civil Works - Others
90 days
AIESL Engineering Premises
As per tender document
7 documents required · 7 mandatory
₹0
₹65,800
Yes
As per tender document
5 May 2026
27 Feb 2026
23 Mar 2026
27 Feb 2026
20 Mar 2026
7 Mar 2026
27 Feb 2026 - 20 Mar 2026
6 Mar 2026
Civil Works
SITC of 4Nos concealed Split AC
Electrical & Shifting Works
Item Wise BoQ
BoQ_Ver3.0
Tender No: AIESL/BOM/MMD/EFD/PFD/008 Dated 27.02.2026
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Excavtion
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,All kinds of soil.
Soling
Random rubble masonry with hard stone in foundation and plinth incuding levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand).
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix).
Breaking brick wall
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
Flooring Breaking
Dismantling tile work in floors and roofs laid in cement mortar including stacking material.
Removing Door
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below.
Carrying out repairs to RCC structure.
Providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. Providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. Providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'BASF" (MASTER EMACO 348 S) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of AIESL/Airport premises.
Providing & Laying PCC 1:2:4
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level: 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%).
Breaking plaster
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing 'Brick wall
providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks.
Providing Lintel work
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing Reinforcement
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade more. Fe-500D.
Providing Plastering
Providind and applying 15-18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
Providing & Laying flooring
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand) :25 mm thick.
Providing and applying Painting
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : Two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.
Providing and applying POP
Providing and applying plaster of paris putty of 2-6 mm thickness over plastered surface to prepare the surface even and smooth complete including scaffolding as and where required.
Providing and applying synthetic enamel paint (SEP) Providing and applying synthetic enamel paint (SEP) of Asian paints or ICI Dulux make paint with primer as described below of approved make and of first quality and of required colour and shade to give a smooth and even finish to any surfaces at any location and at all levels, including scaffolding, preparation of surface all as directed etc. complete.
Two or more coats of 1st quality SEP of Asian or ICI Dulux paints over painted surfaces or new surface.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) Door thickness: 30 mm thick
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm
Providing Hinges
Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm
Providing Aldrop
Providing and fixing aluminium sliding door bolts , ISI marked anodised ( anodic coating not less than grade AC 10 as per IS 1868 ) , transparent or dyed to required colour or shade , with nuts and screws etc. complete
Providing Door Closer
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
Providing Tower bolt
Providing and fixing aluminium tower bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade , with necessary screws etc. complète.
Providing Handle
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
Providing False ceiling
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings, including erecting scaffolding as and where required and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.
Providing Anodized Alumiuium
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
Providing Glass for window 5mm including
Providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shal be measured) Glass film fix on window glass as an require.etc and as directed by Engineer-in-charge.With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Providing and laying granite
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent.
Carting away Debris
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Carefully removing the existing wooden/aluminum/aluminium-glazed partition, Glazed-windows with wooden frames and work stations /cubicles from offices at NEC premises/ OAP Non engneering area and refixing the same with necessary alteration/addition at various sections at AIESL engineering premises OAP. This job includes cutting the exisiting wooden/aluminum partition with or without glass, loading the removedpartitions and shifting to OAP and re-fixing available partitionsand wooden/aluminum doors of any size, section and type etc.at all levels including erecting and fixing in position, providing /replacing anodized aluminum/wooden sections with necessary hardware like locks, door closers, hinges,gasket rubber, screws, nails etc., making the surface good with smooth finish, all complete at designated location as per given drawings,This also incudes providing and fixing available pre-laminatedparticle board as and where required. The rates shall include transport, engaging skilled & unskilled labour, tools, machine,equipement etc as instructed by EIC. (Including of cutting of glass with wooden framing)
Dismantling Old false ceiling
Dismantling false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Removal of the existing rolling shutter from NEC, Sahar, and its relocation to the OAP premises. The work includes setting and alignment of the shutter mechanism, adjustment of wheels, worm, and spring tension, dismantling the shutter for proper realignment, and refixing it at the designated location at designated location after all necessary adjustments. In addition, complete greasing and lubrication of all moving parts shall be carried out to ensure smooth and efficient operation. The scope also includes the removal and proper stacking of the existing wooden door at the designated location. All work shall be executed as per the instructions of the Engineer-In-Charge (EIC).
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing expansion fastener of approved make and quality in concrete or rubble masonry including drilling hole of required depth., including labour, tools, plants, scaffolding etc., complete.
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Supply of 2 TR DX Concealed Split AC Unit (Indoor unit and Outdoor unit) Acceptable Make - Voltas/Blue Star/Daikin/Mitsubishi/LG
Installation of indoor unit with all necessery support including hardware, installation of outdoor unit, wall cutting to fit indoor concealed AC unit, refrigerant gas pipe connection, pressurizing, leak testing, vacuumizing, refrigerant gas charging, testing, commissioning, etc. all complete of 2 TR DX Concealed Split AC Unit
Supply and installation of COPPER Refrigerant Piping of make : Mandev / Nissan / Rajco
Supply and installation of 4 core x 2.5 Sq mm flexible cu.cable of Make -Polycab/CCI, ISI certified, Control cabling from Indoor to outdoor unit for all the units with the necessary fittings.Control Wiring thru pvc conduit.
Supply and installation of PVC Drain pipe
Supply and installation of 24 G GI Rectangular Ducting with all necessery hardware
Supply and installation of 10 mm Open cell Class 1 accostic Rubber
Supply and return air grilles
Supply and installation of Canvas connection
Supply and installation of MS Stand and Support works
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Paint Booth Area - 1) Removal of 3 existing Electric panel coming from substation to Central Compressor House of substation side corner with removal of Incoming and outgoing cables. 2) SITC of 3.5 core 240 SQMM., Aluminum Armoured xlpe cable of approximate length 120 M (double run) from LT panel to main switch sub panel, with compatible terminations/ lugs at both end and laying underground. 3) SITC of floor mounted panel with 800 A incommer switch. 4) SITC of 25 sqmm, 4 Core armoured copper cable for electrical supply for paint booth blower motors (Qty.2), Water pump motors (Qty.2), approximate length 20 M with terminations to both end and SITC of fire proof dual starter. 5) SITC of 4 sqmm, 3 core, Copper armoured cable with terminations to both end for 2 Ton AC (Qty.2), approximate length 20 M. 6) SITC of Flame proof panel lights, Qty.6 of 36 Watt, with flame proof switches, 12 Model backbox with necessary wiring. Approved Make 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Legrand / Schneider
Sanding Area -SITC of 3 core, 10 sqmm, copper armoured cable, approximate length 30 M with proper terminations from main switch sub panel to sanding room with powder coated box with 4 pole, 63 A MCB, job includes fixing of mcb box with bracket. Aprooved Make - 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Legrand / Schneider
Heat Treatment Area - SITC of Main Supply cable from Main switch sub panel to heat treatment area, of 25 sqmm, 4 core, Aluminum armoured, approximate length 120 M with termination to both ends. SITC of 6 way, SPNDB with bracket, with 3 core, 6 sqmm copper cable with terminations (Qty.6), approximate total length 30 M (for 3 sepearte machines) and SITC of 200 A FN type switch with enclosure (Qty.3) and bracket (Qty.3) individually for Wild Barfield furnace, Airpit furnace and Therelac oven. Aprooved Make - 1) Electrical Cable - Polycab 2) Switchgear - Legrand / Schneider
Welding & Grinding Machine - SITC of 12 way, SPNDB, 4 pole, 100 A with bracket and SITC of 4 core, 16 sqmm , Copper armoured cable with terminations to both ends, approximate total length 50 M for main supply in room. 63 A, 4 pole,MCB, Qty.1, sp mcb 20-23 A Qty. 4 for welding machine and grinder (RR Plug/ socket) with associated wiring and hardwares to complete the job in all respect. Aprooved Make - 1) Electrical Cable - Polycab 2) Switchgear - Legrand / Schneider
Earthing - Supply and laying of 8 SWG GI Wire bare conductor for grounding.
Removal of Electrical cables (300 sqmm) quantity 5, approximate length 20 M.
Shifting of starter (32 Amp), Main switch (63 Amp) from existing location to nearby compressor area, in the same room with bracket and SITC of 4 core, 25 sqmm aluminium armoured cable, approximate length 60 M. Removal of unused power switch. Aprooved Make - 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Legrand / Schneider
Removal of old compressor lines of 4 inch diameter from Central Compressor House and shift to scrap yard.
Removal of wall mounted angle shed (Qty.2) and shift to scrap yard.
Removal of old cooling tower water line of 2 inch diameter & shifting to scrap yard.
Removal of new paint booth side old rolling shutter & shifting to scrap yard.
Removal of all unwanted cable laid on walls / trenches/ ceiling of CCH.
Supply & Installation of 40 Watt, 4 feet LED tube lights with switch boards & necessary wiring, MS conduit and all required hardwares. Approved Make - 1) Tube light - PHILIPS/ Wipro 2) Electrical Cable - Polycab/ Anchor/ Finolex 3) Switchgear - Anchor/ GM/ Roma
SITC of 6 moduler 2 switch/ 2 socket for general use at various locations with 2.5 sqmm wire and 20mm MS conduit. Job include point wiring for switch board. Approved Make - 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Anchor/ GM/ Roma
Removal, shifting, reinstallation and commissioning of sanding M/c, Welding M/c, Grinding M/c, Therelac Oven, Wild Barfield Furnace, Air Pit Furnace, water tank.
Shifting & Installation of Chain Pully block (500 KG) as advised by EIC
Shifting of lathe machines (Qty.3), Grinder Machines (Qty.3) and Saw Machine (Qty.1) from COD, existing Machine Shop, Ground Floor, Hangar No. 1 to proposed COD Machine Shop (Old Fan T/R Section), Ground Floor , Hangar 2. Conect the equipment with respective electrical source.
FAN TR Section - Supply, Installation, testing and commissioning of 8-Way VTPN DD MCCB DB: Factory-made, powder-coated, 6-way distribution board with MCCBs and MCBs. Incomer (Main Incoming ): 200A, 4P MCCB, 1 no.( for incoming power supply). Outgoing Circuits: 3P, 63A MCBs, 8 nos. (for various outgoing loads). Approved Makes: Legrand/ Schneider for the MCCB, MCB, and other associated components.
Cable Connections: Incomer - 4C X 50 sqmm, Aluminum, Armoured, length - 50 M. and outgoing cables -4C X 4 sqmm, Copper, Armoured, length - 100 M Approved Makes: Polycab/ Anchor/ Finolex Job includes: laying and termination of cables with required lugs, glads, screw.fixing of D.B with bracket and IN/OUT connection,ALL complete with hardware, and consumables to complete the job in its totality.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Tender_Document.pdf
Tender Documents • 5.16 MB
BOQ_313151.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid