Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹49.4 L+₹2.2 L (4.77%)Rejected-Finance 94A APR COLONY BILHARI JABALPUR MP | JABALPUR | MADHYA PRADESH | 482020 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹49.5 L+₹2.3 L (4.97%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹49.9 L+₹2.8 L (5.89%)Rejected-Finance PB NO 809 ABERDEEN BAZAR PO ATLANTA POINT NEAR POLICE WIRELESS PORT BLAIR 744104 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744104 | L4 | Rejected-Finance Not being lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical residucal work load not submitted |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
Junlgighat PO Port Blair
PROVN OF WOODEN CUPBOARDS IN OTM ACCN AT INS UTKROSH AND PROVN OF LIGHTENING ARRESTOR FOR CERTAIN MD ACCN AT AJAY BAUGH AND UNDER GE MINNIEBAY, PORT BLAIR
2022_MES_549612_1
8173/E8
Open Tender
Civil Works
Item Rate
120 days
GE Minniebay
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE Minniebay
₹90,000
Yes
26 Oct 2022
3 Sept 2022
28 Sept 2022
3 Sept 2022
26 Sept 2022
19 Sept 2022
60 days
Amount
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed by Engr-in-Charge.
Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed by Engr-in-Charge
M&L for rendering 10 mm thick plaster in CM (1:6) on brick/block wall or concrete surfaces finished even & fair without using extra cement complete all as specified and as directed by Engr-in-Charge
M & L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge
S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm, Main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab, roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid including preparation of new surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge
M & L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge
S&F 18 to 20mm thick HDF board including decorative laminations on both sides , one side plain and another side decorative fixed to frame work complete all as specified and as directed by Engr-in-Charge
M&L for first class hard wood for wooden beading , cupboards / shelves / wardrobe / wall panallling of sectional area exceeding 6 Sqcm & not exceeding 13 Sqcm complete all as specified and as directed by Engr-in-Charge
S&F 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-Charge
S&F 100 mm size hasp and stable, safty type , brass with mild steel hinges pin incuding bolt to hinge plate with scrows complete all as specified and as directed by Engr-in-Charge
S&F 30mm contInous piano hinges (width of flaps, when open) ,mild steel, bright finish or electrogalvanished complete all as specified and as directed by Engr-in-Charge
S&F teak wood lipping frame 6.0mm thick for 18/ 19mm width fixed with nails/ screws complete all as specified and as directed by Engr-in-Charge
S&F 2nd class hard wood for plain, solid, straight, chowkats and frames, wrought, framed reabeated the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge
S&F Magnet catch for cup boards of brass body and striking plate complete all as specified and as directed by Engr-in-Charge
S&F in repairs curtain rod / harrison rails mild steel chromium plated with fixed brackets , stops, rollers etc, 25 mm dia with fixed brackets , stops rollers etc complete all as specified and as directed by Engr-in-Charge
S&F in repairs brackets mild steel chromium plated suitable for curtain rod 25.0mm dia complete all as specified and as directed by Engr-in-Charge
S&F 25x3mm aluminium earth continuity conductor or main earthing lead fixed to wall / roof top of bldg of any height for lightening arrester / fixed to poles or any other indicated situation for loop earthing etc. as required with screws, nuts and bolts including scaffolding at any height and safey arragements complete all as specified and as directed by Engr-in-Charge
Supply and fix 50mm bore light grade ISI marked galvanized iron tubing fixing on roof top / wall with necessary GI clamps of size 32X6mm & other accessories at regular intervals including welding work for fixing Air terminal complete all as specified and as directed by Engr-in-Charge
M&L for earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32x6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for galvanised steel plate electrode required, as specified and as directed. (v) If the desired earth registance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. (vi) Earth test report shall be submitted to Accepting Officer for the payment of RAR / FB
Supply and fix 32x6mm Galvanised Iron earth continuity conductor or main earthing lead fixed to wall / roof top/buried under ground/fixed to pole for loop earthing etc as required using Porcelain clit/post insulators with screws, nuts and bolts including necessary scaffolding and safety arragements complete all as specified and as directed by Engr-in-Charge
Material and labour for test point terminal block made of gun metal or phosphorous bronze, size 75mm x 75mm x 25 mm thick, drilled and screwed including 3 Nos of 8 mm dia,25 mm long hexagonal head screws, including polycarbonate box of size 130X130X77mm for protection of test point terminal complete all as specified and as directed by Engr-in-Charge
Supply and fix air termination, single pointed, copper rod 12mm dia and 300mm long (99.9% molecularly copper) fixed on roof top of building at height not less than 4th floor with aluminium strip for conductivity to ground complete all as specified and as directed by Engr-in-Charge
M & L for PVC sleeve suitable for protection of lightening conductor of size 32 X6mm GI Strip on ground / wall from corrosion/rusting complete all as specified and directed by Engineer-in-Charge.
M&L for earth pit indicator for existing earthing pit made out of 16 mm dia and 60 cm long MS square bar embedded in plain cement concrete (1:3:6) Nominal mix type C-1 using 20 mm graded stone aggregate in PCC block of size 30 X30 30cm including CI plate of size 30X30X 3mm thick fixed on side of PCC block complete al as directed by Engr -in - Charge.
M&L for Plain cement concrete 1:2:4 (nominal mix) type B1 using 20mm graded stone aggregate in foundations filling and mass concrete including formwork complete all as specified and as directed by Engr-in-Charge
M&L for Plain cement concrete 1:3:6(nominal mix) type C-2 using 40mm graded stone aggregate as in coping/collar of poles including necessary form work complete all as specified and as directed by Engr-in-Charge
S&F leakage repair waterproof adhesive tape of size 5cmx5m for pipe leakage/ Roof Water Leakage Solution made up from Aluminium Foil Tape Waterproof heat resistant Adhesive Tape/Butyl Rubber Tape for sealing Surface Crack as per manufacturer's instructions complete all as directed by Engineer-in-Charge.
Material and labour Instant Leak Plug (Fast setting powder) to immediately arrest water leakage from cracks in concrete and masonry surfaces and to seal the leaking / dripping water which applied under continuous wet conditions as per manufacturer's instructions complete all as directed by Engineer-in-Charge.
M&L for removing,cutting vegetation, trees, plants and shrubs of height not exceeding 90cm each etc in any position of (G+4) building by cutting hole into brick/Block masonry / concrete surfaces (for removing the roots of trees/plants) and injecting Chemical glyphosate herbicide (4% concentration) to kill unwanted plants,shrubs & weeds growth and making good of the disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and finsihing the surfaces to match with existing complete all as specified and as directed by Engineer-in-Charge. Note:(i) The unit quoted rate shall deemed to include cost of WPC & necessary scaffolding. (ii) Contractor shall held responsible for providing safety gears and deploying safety equipments for smooth operation of item of work.
Ravi Enterprises
M/s Karbhagam Sales Agency
Chandra Construction Enterprises
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .