Facelifting of 2.25 MGD New AND 1.50 MGD Army Units of Doodhganga WTP

Providing and fixing punched-tape G.I. concertina coil fencing, 600 mm dia with hot-dip galvanized wire of size 2.0–2.5 mm, having high tensile strength of 165 kg/sq. mm and weight 43.478 gm/metre including G.I binding/tie wire, clips, staples & other necessary fixtures, tools tackles etc. required at site: Complete Job

Providing & fixing 200 W LED Waterproof Flood Light (suitable for outdoor/IP65 or better) including all accessories (copper wire, flexible conduit, junction box, clamps, connectors, supports, earthing, termination), complete with necessary electrical works, testing, commissioning: Complete Job. The job involves dismantling and removing of existing non-functional light fixtures and stacking as directed by the Site incharge.

Providing and laying of Polymesh of standard make & quality during epoxy paint application including all sort of overlapping 10 cm, the item includes cost of chemicals viz acquacrete, three or more coats including cost of preparation of surface.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete: On concrete work

Repairs to brick-type clay/terracotta cladding tiles on inauguration stone structure including removal of old tiles/mortar, cleaning and re-fixing existing tiles with cement mortar (1:4), replacing missing tiles with similar ones and finishing as per directions of the Site in-charge: Complete Job.

Taking out existing wooden window shutter, repairing by cutting out damaged/decayed portions, providing and fixing new seasoned timber pieces of required section in place of removed portions, making good the joints with proper bonding/dowels/screws, and refixing the repaired window shutters in position to the existing frame, including replacement of hinges, tower bolts, screws and other fittings wherever required, complete in all respects as per the direction of the Engineer-in-Charge.

Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation & thickness without air pockets & shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6") as specified.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead: With cement mortar 1:4 (1 cement : 4 fine sand)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel/iron works having VOC content less than 250 grams/liter

Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead: of area of 3 sqm. and below.

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Kail wood.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing of exhaust fans of size not less than 200x200mm of approved brand and make like Bajaj/Orient including all fittings.

Manufacturing, providing and fixing of wall mounted Roll of Honour Board including the cost of supporting stiffners and all sorts of carraiges complete, with the following specifications: a) Type: Cut Vinyl on Acrylic Sheet b) Shape: Arched Rectangle c) Thickness: 5 mm d) Size: As per requirement e) Vinyl Colour: Golden Rod f) Background Colour: Black g) Sign Content: Alphabet & Logo

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply, Installation, testing and commissioning of split type (Hot & cold) 5 Star rating inverter technology, 1.5 ton AC including auto Stabilizer of required capacity, installation charges complete. The job includes cost of accessories viz wires, PVC channels, MCB's, T&P, installation charges all complete for all leads and lifts and all sorts of carriage.

Repainting of existing wall-painted signage including repainting of existing letters in matching colours and shades. The job includes preparation of surface, application of one coat of suitable primer and two coats of acrylic emulsion paint (approved shade and make), repainting of letters with masking for neat edges, touch-ups and finishing, including cost of all materials, labour, tools & plants: Complete Job.

Supply, fabrication and erection of a 4 x 4 ft outdoor-grade weather-proof site information display board complete in all respects, including fabrication of a supporting MS angle/pipe frame treated with anti-corrosive primer and finished with two coats of enamel paint, provision of a weather-proof backing panel, high-resolution digital printing on outdoor-grade laminated vinyl/sticker or UV printing covering all required logos, drawings, site plans, text, and color schemes as approved along with minor civil works for foundation/anchoring as directed by the Engineer-in-charge: Complete Job.