AGE I CGN 01 22 23 REPAIR AND REPLACEMENT TO INTERNAL ELECTRIC SUPPLY INCL ACCESSORIES LED LIGHTS ETC UNDER AGE I CG NOIDA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down carefully submain wiring with aluminum conductor cable of any size in PVC conduit/cashing caping complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. and taken as credit and making good the disturbed surface of wall / floor etc.

Taking down DBs any type, any way, TPN,SPN including MCBs SP/SPN/ MCCB complete all as specified and directed.

Material and labour of point wiring for one light/fan pont with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC conduit size not less than 20 mm including necessary accessories like bends, tees, PVC junction, square elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly complete all as specified and directed.

All as per item no. 5 above but for one light point controlled by two way switch complete all as specified and directed.

All as per above item No. 5 but One bell/ buzzer point controlled by one push button on the same board with other switches or independent

All as per above item No.5 but for one 3 pin, 2 in 1, socket outlet 6 Amps on same board complete all as specified and directed.

All as per above item No.5 but for one 3 pin, 2 in 1, socket outlet 6 Amps on independent board but below the switch board of light points in the same vertical plane complete all as specified and directed.

All as per srl item No 5 above but for power socket 15/16 Amp with cable 2.5 sqmm for phase, 1.5 sqmm for neutral and earth complete all as specified and directed.

Supply & Fixing in repair Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply & Fixing in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and Fixing in repair Switch piano, FLUSH TYPE, Single pole, One way, 5 Amp

Supply and Fixing in repair Switch piano, FLUSH TYPE, Single pole, One way, 15 Amp

Supply and Fixing in repair Socket outlet, 2 in 1, 3 pin, 5 Amp

Supply and fixing in repair Socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, Flush Type

Suppy and Fixing in repair Push Bell, Flush type, 5 Amps.

Supply and fixing in repair Stepped type Electronic Fan Regulator,1 Way Flush type on the existing pherolic laminated sheet etc.

Suppy and Fixing in repair bell, Ding Dong, AC, 230 volts, Single Pole

S & F in repair Distribution board sheet metal enclosure double door, factory made, fixed flush with wall inside the niches for mounting MCBs 415 volts with bus bars with front openable cover Triple pole and neutral 4 way consumer unit complete all as specified and directed.

S & F ir repair Distribution board sheet metal enclosure double door, factory made, fixed flush with wall inside the niches for mounting MCBs 230 volts with bus bars with front openable cover Single pole and neutral 8 way 200 Amp bus bar consumer unit complete all as specified and directed.

S & F in repair Distribution board sheet metal enclosure double door, factory made, fixed flush with wall inside the niches for mounting MCBs 230 volts with bus bars with front openable cover Single pole and neutral 4 way 200 Amp bus bar consumer unit complete all as specified and directed.

M & L in replacement for PVC rectangular block for mounting switches, socket, fan regulator etc. with 3 mm thick plastic laminted sheet cover of size 100mm x 100mm and 50mm deep, Make - Presto Plast

M & L in replacement for PVC rectangular block for mounting switches, socket, fan regulator etc. with 3mm thick plastic laminted sheet cover of size 175mm x 100mm and 50mm deep Make - Presto Plast

M & L in replacement for PVC rectangular block for mounting switches, socket, fan regulator etc. with 3mm thick plastic laminted sheet cover of size 200mm x 150mm and 50mm deep Make - Presto Plast

Supply and Fix in repair ceiling rose, surface bakelite, 65x50mm, two to three terminals, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing of MCB TPN 50-63 Amps 10 KA, B curve, 415 Volt, 50 Hz complete including taking down unservicable all as specified and directed.

Supply and fixing of MCB SPN 5-32 Amps, 10 KA B curve, 230 Volt, 50 Hz complete including taking down unservicable all as specified and directed.

Supply and fixing of MCB SP 6-32Amps 10 KA, B curve, 230 Volt, 50 Hz complete including taking down unservicable all as specified and directed.

Supply and fixing in repair of Sub main wiring for PVC insulated single core stranded copper cable FRLS of 2x2.5 sq. mm + 1x 2.5 sq. mm and drawing in existing conduit and make good distribured area same as existing with colour complete all as specified and directed.

Supply and fixing in repair of Sub main wiring for PVC insulated single core stranded copper cable FRLS of size 2 x 4 sq. mm +1x 4 sq. mm earth wire and drawing in existing conduit and make good distribured area same as existing with colour complete all as specified and directed.

Supply and fixing in repair of Sub main wiring for PVC insulated single core stranded copper cable FRLS of size 2 x 6.0 sq. mm and 1x6.0 sq. mm earth wire for earthing and drawing in existing conduit and make good distribured area same as existing with colour complete all as specified and directed.

Supply and fixing in repair of Sub main wiring for PVC insulated single core stranded copper cable FRLS of size 4 x 10.0 sq. mm and 2x6.0 sq. mm earth wire for earthing and drawing in existing conduit and make good distribured area same as existing with colour complete all as specified and directed.

M & L in replacement for rigid non-metallic PVC conduit excluding boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., Supplied & fixed External dia in 25 mm, complete all as specified and as directed by the Engineer-in-Charge

M & L in replacement for rigid non-metallic PVC conduit excluding boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., Supplied & fixed External dia in 20 mm, complete all as specified and as directed by the Engineer-in-Charge

Suppy and Fixing in replacement RCCBs Double pole 30mA, 16A for earth leakage, Overload & Short-Circuit protection

Supply only replacement for RCCBs Double pole 30mA, 32A for earth leakage, Overload & Short-Circuit protection

Suppy and Fixing in replacement MCBs Double pole 40A,10 KA C curve 230 volts Make -Havells,L&T,Legrand.

Suppy and Fixing in replacement MCBs Triple pole 25-63A,10 KA C curve 230 volts Make -Havells,L&T,Legrand.

Fixing only LED lights fitting of any size with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down unservicable all as specified and directed. Note: LED tube light will be provided by depatment as supply only.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old unservicable light all as specified and directed.

Supply and fixing in repair round/Square shape 6 watt 220 volts AC recessed type As per sire requirement) with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unservicable light all as specified and directed.

S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unservicable light all as specified and directed..

M & L in replacement of 6 Amps 3 pin plug Top 250V all as per directed by Engr in Charge

M & L in replacement 16 Amps 3 pin plug Top with indicator 250V all as per directed by Engr in Charge

M & L in replacement 20 Ams Earth plug Top (2P+E) 250V round shape all as per directed by Engr in Charge

Supply and fixing in repair LED building security fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down unservicable all asecified and directed.

Diconnecting and Taking down existing hung ceiling fan (1200/1400mm sweep) Exhasust Fan of any size and removing to a place where directed at sec 23/24/52/62 for repairs/painting/replacing of parts/rewinding etc and refixing the same in old position with provn of new connecting wire of size 1.5 sqmm (of copper conductor) from fan to ceiling rose complete directed by Engr -in- Charge.

M & L for cleaning of dust properly and servicing, greasing, oiling of bearings of ceiling /exhaust fan (Replacement of any item if specifically ordered by Engineer - in - charge shall be paid as Supply only/Supply and fixing as given hereinafter

M & L for rewinding of burnt fan motor of 1200mm sweep ceiling fan of any make, any type any model with super enamelled copper wire of suitable size / existing SWG including taking down, refixing in position after repair.rewinding etc complete all as specified and directed by Engineer-in-Charge.

All as per item no 50 above but exhaust fan of size 350 to 450 MM sweep

S & F in replacement ball bearing No 6201/6202 for all types of fans of any size complete all as specified and directed by Engineer-In-Charge. Make : SKF/NBC

S & F in replacement Hanges shackle assy with nuts, bolts, washers and split pins, rubber reel heavy duty complete all as directed by Engineer-In-Charge.

S & F in replacement of fan motor suitable for ventilation fan 230/300 mm suitable for existing frame or complete all as specified and directed by Engineer-in-charge.

Fixing only in replacement of capacitor 2.5 Mfd for ceiling fan complete all as specified and directed by Engr-in Charge.Make- Usha,Kiltron,Havells.

All as per Item No 55 here-in-before but 3.15 Mfd

Supply and fix PVC propeller type ventilating fan 300 MM dia.

S&F Modular Switch, 1 Way, 6A, 1 Module suitable for fixing in existing cover plate to replace existing modular switches

S&F Modular Switch, 2 Way, 6A, 1 Module suitable for fixing in existing cover plate to replace existing modular switches

S&F Modular Push Bell, 6 A, 1 Module suitable for fixing in existing cover plate to replace existing modular bell push

S&F Modular Switch, 1 Way, 16A, 1 Module suitable for fixing in existing cover plate to replace existing modular socket

S&F Modular Socket, 6A, 2/3 pin combined, 2 Module suitable for fixing in existing cover plate to replace existing modular sockets

S&F Modular Socket, 16A, 2/3 pin combined, 2 Module suitable for fixing in existing cover plate to replace existing modular sockets

S&F Fan step regulator, 120 W, 2 Module suitable for fixing in existing cover plate to replace existing modular regulator

S&F Modular White cover plate with frame, 2 Module suitable for fixing in existing flush box to replace existing modular cover plates

S&F Modular White cover plate with frame, 3 Module suitable for fixing in existing flush box to replace existing modular cover plates

S&F Modular White cover plate with frame, 4 Module suitable for fixing in existing flush box to replace existing modular cover plates

S&F Modular White cover plate with frame, 6 Module suitable for fixing in existing flush box to replace existing modular cover plates

S&F Modular White cover plate with frame, 8 Module suitable for fixing in existing flush box to replace existing modular cover plates

KRISHANA ELECTRIC WORKS

M/S GUPTA ENTERPRISES

MK Enterprises

Sanjay Associates

PARADISE INFRA POWER COMPANY

A.R.P. ENGINEERING SERVICES