Tender for the work APS to 3Ph 5 wire to LTI Service Connection of Sara Industries for load of 58.16KW at Plot No. 09, Phase-II, IDC Honda, Sattari Goa in the jurisdiction of SO Honda under SD-III, Valpoi-Goa

Cost of Material

HDGI X-arm clamp LA for 9.0 mtr. Pole.

HDGI stay clamps for RCC Pole 9 m L.A

Shackle insulator with HDG metal parts.

3-WAY RMU, 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker confirming to IS & complete with fault passage indicator.

Supply and laying 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable open Trench

11KV 3 phase indoor terminating kit to be used with cables - 300 sq.mm.

Supply and erection of straight through joint for 300 sq.mm cable (Considering length of the cable for one cable drum as 500m)

Supply and laying 11KV, 3 core 95 sq.mm A2XFY Aluminium Armoured XLPE Cable (RMU to DTC : Distance considered as 10m per every DTC tapping plus 10m raiser) = 20m per DTC

11KV 3 phase outdoor terminating kit to be used with cables - 95 sq.mm.

11KV 3 phase indoor terminating kit to be used with cables - 95 sq.mm.

Supply & Erection of HDGI flat of size 25mm x 5mm for earthing.

HDGI earthing pipe 8 ft. long 40 mm dia class-B, fabricated & perforated including alternate layers 30 cm thick of charcoal, salt & earth (Charcoal & salt - 10 Kg. each per pit) inclusive of excavation back filling & spreading of excavated earth evanly.

Enammeled Danger board 11 KV.

Supply and Laying of Underground Cable protective cover as per specification as given below: The concrete slab should be machine made using semi-dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-Press" machine with a high vibration frequency and a hydraulic pressure of 40 MT. The size of the slab shall be 480mm x 250mm x 50mm (+- 2mm) and the concrete grade shall be M30 adhering to IS 456 : 2000 and shall have a minimum crushing strength of 30N/mm2 (28 days strength) when tested. Calculation: (100/0.48)

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. Sand (0.2*0.4* 0 m)+(0.2*0.6* 100 m)

Supply & Erection of Warning tape.

RCC Cable route marker (400 x 900 x 100mm) (as per CEE approved drawing, copy enclosed) (one per every 100m for entire route length)

Bricks class design 75 kg/cm2 (1st class wire cut) (Dimensions 0.2*0.1*0.1) (Calc. 100 /0.1)

Single Core XLPE Cable Unarmoured 1.1 KV 300Sq.Mm

XLPE armoured cable 3 ½ core 120 sq.mm.

Compression Type Aluminium Lugs 300Sqmm

Compression Type Aluminium Lugs 120Sqmm

FRP Fencing complete with Gate as per specification for Distribution Transformer (Size x 4Mx3Mx2M) with Concreting for FRP fencing Supports with plinth (0.3x0.3x0.5) Cu.mx12nos.Each ratio 1:3:6

Distribution Transformer Metering unit with DLMS/COSEM protocol energy meter with modem

Cost of Erection

RCC pole 9 mtr long.

HDG LT 4 pin x - arm channel type.

HDG LT 2 pin x - arm channel type.

HDGI X-arm clamp LA for 9.0 mtr. Pole.

HDGI Nut & Bolts

HDGI stay clamps for RCC Pole 9 m L.A

G.I. Turn Buckle with eye bolt 11 KV

Shackle insulator with HDG metal parts.

AA'ANT Conductor

AA'GNAT Conductor

3-WAY RMU, 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker confirming to IS & complete with fault passage indicator.

Supply and laying 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable open Trench

11KV 3 phase indoor terminating kit to be used with cables - 300 sq.mm.

Supply and erection of straight through joint for 300 sq.mm cable (Considering length of the cable for one cable drum as 500m)

Supply and laying 11KV, 3 core 95 sq.mm A2XFY Aluminium Armoured XLPE Cable (RMU to DTC : Distance considered as 10m per every DTC tapping plus 10m raiser) = 20m per DTC

11KV 3 phase outdoor terminating kit to be used with cables - 95 sq.mm.

11KV 3 phase indoor terminating kit to be used with cables - 95 sq.mm.

Supply & Erection of HDGI flat of size 25mm x 5mm for earthing.

HDGI earthing pipe 8 ft. long 40 mm dia class-B, fabricated & perforated including alternate layers 30 cm thick of charcoal, salt & earth (Charcoal & salt - 10 Kg. each per pit) inclusive of excavation back filling & spreading of excavated earth evanly.

Enammeled Danger board 11 KV.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : b) All types of Ordinary rock including all types of laterite rock, blasting prohibited (1.1*0.60* 100 m)

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. Deduct for RCC Slab (0.9*0.4* 10 m)- (0.48*0.25*0.05*No. of Prot. covers 208 )

Supply and Laying of Underground Cable protective cover as per specification as given below: The concrete slab should be machine made using semi-dry concrete that is batched in a fully automatic PLC controlled concrete batching plant and cast in a fully automatic "Vibro-Press" machine with a high vibration frequency and a hydraulic pressure of 40 MT. The size of the slab shall be 480mm x 250mm x 50mm (+- 2mm) and the concrete grade shall be M30 adhering to IS 456 : 2000 and shall have a minimum crushing strength of 30N/mm2 (28 days strength) when tested. Calculation: (100/0.48)

RCC Cable route marker (400 x 900 x 100mm) (as per CEE approved drawing, copy enclosed) (one per every 100m for entire route length)

200 KVA 11kv/.4kv 3 phase outdoor type, oil immersed Aluminium wound Level II distribution Transformers, Energy Efficiency Level-II as per IS: 1180 (Part-I): 2014, suitable for outdoor use and for plinth mounting.

Single Core XLPE Cable Unarmoured 1.1 KV 300Sq.Mm

XLPE armoured cable 3 ½ core 120 sq.mm.

Compression Type Aluminium Lugs 300Sqmm

Compression Type Aluminium Lugs 120Sqmm

M.S. Distribution Box With 400Amps MCCB and Kit-Kat Fuse

FRP Fencing complete with Gate as per specification for Distribution Transformer (Size x 4Mx3Mx2M) with Concreting for FRP fencing Supports with plinth (0.3x0.3x0.5) Cu.mx12nos.Each ratio 1:3:6

Distribution Transformer Metering unit with DLMS/COSEM protocol energy meter with modem

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 min width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : All types of Ordinary rock including all types of laterite rock, blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Providing and laying in position (1:11/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand: 3 graded stone agg 20mm nominal size) All works upto plinth level

Providing TMT steel reinforcement bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.))(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in allthe floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Centering & shuttering including Strutting, Propping & removal of forms for: Foundations, Footings, Bases for columns

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Painting three or more coas of arcyllic exterior paints of approved brand and manufacture (such as weather shield, Apex) including applying one coat of cement primer and one coat of surface treatment etc. complete

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.