SPECIAL REPAIR TO JOINERY IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Taking down shutters any description area exceeding 1.0 sqm but not exceeding 2.0 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) / steel window, area not exceeding 1.5 Sqm each complete all as specified.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165 (Fe-290), drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooken and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing in position complete all as specified and directed. Note : Cost of welding butt hinges to the door frame deemed to included in quoted rate and butt hinges shall be measured & paid for “Supply only” separately under relevant item of this schedule.

Factory made 35mm thick second class hard wood plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class hard wood rail and styles, fixed to chowkat, complete all as specified and as directed.

Factory made 30mm thick flush shutter, solid core construction, with block boards core and plywood face panels, commercial type on both sides (ISI Marked) fixed to chowkhats complete all as specified and directed.

Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I.complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

Powder coated Aluminium anodised grills for aluminum window and ventlater complete all as specified and as directed .

Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg complete all as specified and directed.

140mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door complete all as specified and directed.

Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to accommodate counter basin etc including dismantling of existing stone slab bedding complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations complete all as specified and as directed.

100mm Butt hinges extruded stainless steel hinge pin type complete all as specified and directed.

125mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Aluminium handle 150mm long , fabricated type anodized complete all as specified and directed.

140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door, fixed as in repair complete all as specified and directed.

Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg fixed as in repair complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, with & including replacement of floor tiles if any broken during repair work and making good surfaces matching to the existing surfaces fixed as in repair complete all as specified and directed.

Solid PVC wall panelling lining consisting of 5 mm thick prelaminated PVC sheet including 5 mm thick PVC sheet fillet of width 35 mm for wall panelling with solvent cement and screw fixing on PVC frame etc including taking down/dismentling of panelling complete all as specified and directed as directed. Make;-Rajshree or other equivalent approved make Note:- Rate shall be inclusive of refixing of taking down E/M fitting & fixturies etc

Anodised aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with including exposed metal frame ceiling with 9 to 12mm thick prelaminated design gypsum board , 600mmx 600mm in size, fixed with screw to aluminium work or with staples on snap grid in ceiling, flat or sloping including dismantling of existing false ceiling complete all as specified and directed.

18/19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber & iron frame-work as in cupbords shutters including suitable size of fillets to cover the edge of boards including hinges,fancy type handle, Magnet catcher, including dismantling of existing any type of board complete all as specified and directed.

Second class hard wood plain, solid straight door chowkats and frames, wrought including transoms or mullions, framed rebatted on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

3.0 mm thick figured glass pin head type and glazing with oil putty in squares/rectangle n.exc 0.50 sqm each complete all as specified and as directed

3mm thick sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 sqm in each pane and fixing with oil putty or wooden beads and leaving the pane clean , complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from old wooden or metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed

35 mm thick block boards , grade 1 quality ,exterior grade, decorative type with decorative face veneer on both face fixed with nail to wooden/steel work used in any type of work to wooden shelf /shutter work fixed as in repair complete all as specified and as directed.

Tubular towel rail, stainless steel, 20mm dia, 60cm long fixed with & incl chromium plated brass screws and wooden / plastic cleat fixed as in repair complete all as specified and directed.

Soap dish stainless steel any type, fixed to plugs with chromium plated brass screws of sample as approved complete all as specified and directed .

Chromium plated Peg set of eight, hat and coat hooks, solid body, not less than 450 mm long fixed as in repair complete all as specified and directed.

Corner glass shelf assembly with ABS bracket of size 300 mm 3 story complete all as specified and as directed.

Stainless steel kitchen plate rack 1.00mm thick of size not less than 900mmx750mm x300mm not less than 7.5kg weight for fixed with stainless steel screw on wall properly fixed as in repair complete all as specified & directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, supplied and fixed as in repairs complete all as specified and as directed . Note : - Cost of supplying wooden beads/ MS flat (as applicable) for fixing wire gauze in panels shall be deemed to be included in respective items of joinery /steel windows. However, fixing wire gauze with beads/ flat supplied with joinery/ steel window shall be deemed to be included in this item and nothing extra shall be admissible on this account.)

Steel windows with side hung shutters including projecting type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of red oxide Zinc-Chromate primer and also including taking down old steel windows and making good disturbed surfaces of cills and jambs to match with adjoining surfaces complete all as specified and as directed .

Ditto- all as per SI No 44.00 here-in-before but without glazing bars complete all as specified and as directed .

Steel window or ventilators ,fixed type with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-chromate primer including taking down existing complete all as specified and as directed .

Mild steel work in framed work such as grills, gratings, framed guard bars etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, railings, door frame and similar work confirming to Fe-290 Grade E-165 complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed .

Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat already primed) and finishing with two coats of synthetic enamel paint complete all as specified and as directed.

Rubber streps 50mm wide and exc 5mm but nexc 10mm thick for door fixed with nails, washers etc fixed as in repair complete all as specified and as directed.

Brickwork with fly ash bricks straight or curved on plan exc 6 metre mean radius built in cement & sand mortar 1:6 including demolition of existing any type of masonary complete all as specified and as directed

Rendering 15mm thick on brick or concrete services in CM 1:6 incl finishing the surfaces fair and evenwithout using extra cement including two coats of white wash /colour wash to match with the existing surface complete all as specified and as directed

12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door fixed as in repair complete all as specified and as directed.

PVC Frame of solid PVC foam of size 45mmx20mm of any colour0f PVC sheet complete all as specified and directed.

PVC shelves & sides made out of solid PVC form profile 20 mm thick made of three layer extruded sheet with top and bottom UPVC layer having density of 1450 gm/cc and middle layer form sheet having density 0.55 gm/cc with matching 0.5 mm thick PVC/melamine edge banding tape in shade as approved . the top layer of shelf &side shall be coverd with 1 mm thick laminated sheet. complete all as specified and as directed.

PVC Shutter made out of solid PVC form profile 18 mm thick homogeneous fine cellular structure panelled having styles and rails of size 45 mm x 20 mm joints mitred at corners. The panel shall be made of 3 mm thick HPL sheet cover with moulding of size 35 mm 15 mm in any colour both side including stainless steel modular hinges,magnet catchers, handles & Knobs complete all as specified and as directed.

Stainless steel basket of different pattern like plate rack,bottle rack etc,fixed with and including adjustable sliding steel channels to kitchen cabin,pattern and no of steel racks will be specified and directed

Cupboards/wardrobes, factory made, framed shell be of 1.25 mm thick pressed steel PBI sheet of size 90x70mm shutter shall made of 1mm thick pressed steel with 6 Nos of 100 mm lomg hinges 3.15mm thick steel hinges standard pattern rim lock with complete locking arrangement including 12 mm vertical rod shall be provided (brass mortice lock vertical type, size 65mm, 2 levers, ISI marked with escutcheon plate abd two key including two coats of spray painting with synthetic enamel paint of approved over a coat of primer including fixing with minimum 6 nos 12 mm dia mild steel bolts 150 mm long grouted in brick wall/ concrete including (Taking down old Cupboard) making good the disturbed surfaces as original with CM (1:4) or PCC (1;2:4) type B0 complete all as specified and as directed.. Note:- The measurement of cup board shall be taken of front elevation only and not girtwise

prem enterprises

S K TRADER

M/s Fateh Enterprises