Providing barricading and other arrangements to the counting centre for No.10 Dharmapuri Parliamentary Constituency, General Election to Lok Sabha 2024 in Dharmapuri District.

Amount

Dismantling, clearing away and carefully stacking materials for reuse for any thickness of walls etc., complete

Brick stone masonry in cement mortar walls under 3m height

For RCC items

Doors & windows including removal of frames, hinges and fastenings

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specifications and as directed by the departmental officers.

Brick work in following Cement Mortar 1:5 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification.

For Ground Floor

For First Floor

For Second Floor

Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification

For Ground floor

For First floor

For Second Floor

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Charges for removing of Glass writing board in class rooms during dismantling of walls and refixing the same board after constructing the wall after the work is Completed including of wood plug , Screws and labour charges etc., as per standard specification and as directed by the departmental officers.

Hire charges for Supplying and fixing of Termite Proof / Water Proof Plywood 19mm thick of best quality with Outer frame using Country Wood Reepers (50 x 25mm) for strong room windows closing including cost of conveyance, screws and fixing charges and removing the same after work is Completed without damages to the Building as per standard specification and as directed by the departmental officers. etc., Complete.

Hire charges for Supplying and fixing of Termite Proof / Water Proof Plywood (12mm thick) for strong room windows closing including cost of L Clamps and Screws and Nuts including cost of fixing charges etc., and removing the same after work is Completed without damages to the Building complete compling with standard specification and as directed by the departmental officers.

Hire charges for Supplying and fixing of Weldmesh of size (1" x 1" ) 10 Gauge including cost of Cutting, fixing over 12mm thick Ply wood using Clamps, Screws (For Strong room Window Closing) including cost of fixing charges etc., and removing the same after work is Completed without damages to the Building complete compling with standard specification and as directed by the departmental officers.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Engaging Labour for Transporting the desks, benches, tables, Librarury rackis and other materials from the existing class rooms to the College Storage rooms/ workshops and to a distance of 300-400 mtrs from the counting centre/ Storage halls and refixing the same in the previous locations after the work is completed as directed by the departmental officers etc., complete

For Carpender I Class

For Mazdoor I-class

For Mazdoor II Class

Hire charges for providing Supporting arrangements for inner barricading using vertical post of GI pipe 2" dia (Jockey) for fixing weldmesh safety arrangements at an interval of 1m c/c upto roof height including diagonal bracings and 5 to 8cm dia casurina props for horizontal ties and tying with coir, nails etc., including labour charges for removing the same after work is completed without damages to the building etc., as directed by the departmental officers etc., Complete.

Hire charges for Providing Inner Barricading arrangements with Weld mesh panel of size 1.20 m x 2.40 m using available (Old) weld mesh material by replacing the damaged MS angles and Weld mesh including loading from section store and conveyance to the Counting Centre and unloading and fixing with necessary screws, bolts and nuts including Painting one coat for synthetic enamel paint etc., and removing the same after work is Completed without damages to the Building etc.,as per the standard specification and as directed by the departmental officers etc., Complete.

Hire charges for Providing waiting shed using GI roof sheet of thickness 2 mm for the height of 12'to 15' sides M.S. supported by M.S. pipes, purlins tie beams, supporting beams and fixing the pre fabricated ready to use members with bolt and nuts zinc washers including conveyance of materials to the site and removing the same after work is completed without damages to the Building etc.,as per the standard specification and as directed by the departmental officers. etc., complete.

Supplying and fixing of Rain Proof padutha Polythene of size (20' x 40') in corridor openings including cost of fixing and labour charges and as directed by the departmental officers

Supplying and fixing in position of class Room stage of size (5.10m x 2.40m) for a height of 0.30m using 19mm thick ply wood including cost of ply wood, nails, etc., Labour for fixing in position and top finishing with Vinyl matt flooring etc.,as per standard specification and as directed by the departemental officers

Hire charges for supplying of Cushion sofa Set (3seater 1 no, single seater 2 no's) with resin cloth and wooden hand rest with wood finishing including cost of transporting charges etc., as directed by the departmental officers etc., complete.

Supplying and fixing of Furniture fittings including cost of fixing charges etc., complete compling with standard specification and as directed by the departmental officers. -300mm Long and 16mm dia Aldrop

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Hire charges for Supplying and fixing of MS Sheet (18 gauge) for Closing Door tops and window openings including cost of cutting, welding and fixing charges etc.and removing the same after work is Completed without damages to the Building complete as per standard specification and as directed by the departmental officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Supplying and fixing CP Two Way Bib Cock with Health Faucet including cost of fixing charges etc., complete

Supplying and fixing of glass pans 4mm thick including cost of fixing charges etc., complete

Hire charges for Plastic chairs with arms including cost of conveyance charges etc., and as directed by the departmental officers etc., complete

Hire Charges for SS Dinning Table of size (6' x 1 1/2' x 2 1/2') including cost of Conveyance charges etc., and as directed by the departmental officers etc., complete.

Supply of steel S Type chairs made up of steel pipe with wooden arm rest. This seat and backrest made of polythene plastic wire including cost of conveyance etc., complete compling with standard specification and as directed by the departmental officers. (As per quotation rate )

Painting two coats of old wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing of Plywood partition wall to a minimum thickness of 110mm thick using 19mm thick plywood on both sides fixed on the Country wood scantling of size 100 x 75mm for Vertical & Horizondal frames including cost of Labour charges wrought and putups, nails, poch screws and with all necessary fittings and fixing charges as per standard specification and as directed by the departmental officers etc., complete

Supplying and fixing of Black tar felt sheet / water proofing sealing tar sheet/membrane of 1 mm thickness in the expansion joint including thorough scrapping and cleaning of the surface cost of conveyance and fixing charges etc., complete compling with standard specification and as directed by the departmental officers. (As per quotation rate )

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Hire charges for Supplying and fixing of Weldmesh of size (1" x 1") 10 Gauge for inner barricading top for safety arrangments to a height of 0.90m for fixing the jockey including cost of 8 to 10cm casurina poles and binding wire etc., and removing the same after work is Completed as per standard specification and as directed by the departmental officers.

Hire charges for JCB machineries for front and side ground levelling etc., and as directed by the departmental officers etc., complete

Supply of locks with 3 keys 7 Levers of heavy quality use for office/ home door lock of anti corrosion, durable, rust resistant etc., complete compling with standard specification and as directed by the departmental officers. (As per quotation rate )

Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run. Hire charges for saffolding charges using 40mm dia MS pipe for vertical and horizontal including cost of Conveyance, fixing and dismantling etc., complete

Supply of Postal Balat Counting tray of size 2' x 1' 6" for a depth of 6" and 12 small compartments using 12mm thick ply wood including cost of Wrought and Putup etc., complete compling with standard specification and as directed by the departmental officers.

Hire charges for Sign board of size 2' x 1' 6" using 12mm thick & 20mm thick ply wood including cost of Wrought and Putup and removing the same after the work is completed as per standard specification and as directed by the departmental officers etc., complete.

Supplying and fixing of 300 Liter capacity of PVC drinking water tank of Food grade with stand using MS angles and flats for a height of 0.90m with tap arrangements for Drinking purpose etc., as per standard specification and as directed by the departmental officers.

Hire charges for Stainless steel Wash hand basin arrangements consisting of 5 taps including inlet and outlet connections from the existing tank etc.,and removing the same after the work is completed as per standard specification and as directed by the departmental officers.

Supply of 120 liter capacity of PVC Dustbin arrangements etc., complete compling with standard specification and as directed by the departmental officers.

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing.

All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. a) Double Leaf

Hire charges for providing outer barrigading arrangements using Metal barricading units of size 10'x4' made up of Steel Pipes of dia not less than 50 mm dia removing the same after the work is completed as per standard specification and as directed by the departmental officers etc., Complete.

Charges for cleaning the septic tank by using High pressure air compressor vehicle specially manufatured for removing the sludge from septic tanks. Including conveyance of sludge to a safetty distance for disposal at spefcific points approved by the municipal and local authorities etc.,complete. The rate also inclusive of making arrangement for removing and refixing the cover slab etc., complete as directed by the departmental officers

Thorough scrapping ,cleaning and preparing the surface such as unstable paint,algai,fungai dust, oil, grease etc, on the wall or floor to be removed by using fungicidal chemical solution with brush including cost of all materials etc,complete and as directed by the departmental officers.

pointing the joints to full depth of tiles with cement morter 1:3 mixed with red oxide and water proofing compound including curing ect complete with complying with standard specification .

Supplying and painting three coats with ready mixed UV resistant fibre reinforce elastrometric rubberized water proof coating over water proofing priming fibre reinforced elastrometric coat of damp seal of approved quality and colour which shall resist 10 bars of water pressure as per DIN 1048 Standards with elongation of 350% as per ASTMD412 and crack bridging of upto 2.5mm conforming to ASNZ standards including cost of all materials etc. complete and as directed by the departmental officers (As Quotation rate)

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.-75mm thick slab (using 20mm HBGS Jelly)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC soil / waste pipe

110mm dia PVC soil / waste pipe

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..ect complete.

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.Internal water supply - Above Ground level

For laying UPVC pipes of dia 32 mm

For laying UPVC pipes of dia 40 mm

SRI SAKTHI CONSTRUCTIONS

MARIAPPAN RAJENDRAN CONTRACTORS