Construction of Outdoor Badminton Courts at resident Welfare Association (RWA) CGERC, Mohammadpur, New Delhi .

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil

Excavating holes more than 0.10 cum & upto 0.5 cum including gettingout the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.

Providing and laying interlocking tiles on smooth CC Base, Size 30.48 x 30.48 x 1.58 cm 10.75 Pcs = 1Sqm; material weather resistance PP, weight 320G/PC (+/- 3%), surface shape HEXAGONAL Grid, Double layer provide space for water Drain and dust through floor, staple 6 locker each side to interlock the flooring around , fire rating Ul94Hb UV resistance : (Colours combination as approved by Engineer in charge) (Badmointon, Vollyball, Basket ball & Skating etc. )

Supply of multipurpose M.S pole for badminton/volleyball duly painted in a pair (two in one type) made out 50mm. dia heavy duty pipe along with base socket in a pair heavy duty type of size 450 X 450x3.0mm including all necessary fixtures fittings.easy moving on 2 Double PU Wheels which are non marking braned wheels to help protect floors

Supply of cotton base badminton net of size 0.75 X 6.10mtr in required color and standard shape with all necessary fixtures.

Providing and fixing Fully Retro Reflective type informatory stainless steel (304 Grade) sign board of size 1200x900mm with back support frame made of 32mm x 1.6mm S.S Square tube attached with 1 no. S.S vertical post of 50mm dia, 1.6mm thick & 3.0mtr long. The face of S.S Frame fully covered with 4mm thick ACP Sheet pasted with approved reflective base, matter and logo etc., complete board to be fixed in ground /surface in C:C block (1:2:4) of size 500x500x500mm (Deep) after necessary excavation holes work at site. All complete as per the direction of engineer in charge.

Supplying and providing chain link fencing 2.60 M height : Fabrication supply and fixing 50mm NB GI pipe at an interval of 2.00m c/c in foundation of 45x45x50 cm in cement concrete 1:4:8 using 40mm broken stone stone fabrication supply and fixing frame of over all size 2.00m x 2.60m made out of M.S. Angles 40x40x5mm, with one vertical support at middle of M.S. T-section (40x40x5mm) and a horizontal support at middle and all innner sides of frame are supported (20 x 6 mm ms Flat ), fixing GI chain liink fabric fencing of 2.00M width and 2.60m Height in mesh size 50x50mm made of GI wire of 4mm, PVC coated to achive outer dia not less than 5mm in required colour and shade drilling holes on the angle and M.S. Flat @ 30Cm intervals fixing chain link to the frame using bolts, nut, washers at all sides including fixing of frame into GI posts, cost inclusive of all material, cutting angles and flats to required lenght, welding, drilling necessary holes on the angle iron and flat , labour and all other charges fabrication and fixing, applying coats os synthetic enamel paint of approval quality and colour after applying a coat of zich rich primer etc. complete ae per direction of engineer in charge and drawing,( earth work and concrete will be measured saparetely

Fabrication supplying and erection of flange mounted hot dip Galvanized octaqgonal Poles of 5 Mtr. Height made from 3mm thick steel plate having bottom Dia of 130 mm & top Dia of 70mm complete base plate of size 200mm x 200mm x12mm thick on existing cement concrete pedestal as required including suppling and welded at suitable height as per direction of Enginer-in-charge. 2 Nos. washer, nuts and locking arrangement completed as required (Make Bajaj/Crompton/Phillips/Wipro/havells)

Supplying and fixing of 4 Nos. 20mm x 700mm long GI foundation bolt (EN 8 grade) with nuts washer including 2 Nos. template of 3mm thick size 200mmx200mmx12mm thick with 4 Nos. 16mm Dia holes to match with PCD of poles base plate as required (Make Bajaj/ Crompton/ Phillips/ Wipro/ havells)

Fabrication supplying and fixing of Galvanized single arm bracket 500mm long galvanized top tube with 1000mm long 48.30x3.20mm thick each side galvanized single over hang with tighting bolt etc. as required ( ordinary) (Make Bajaj/ Crompton/ Phillips/ Wipro/ havells)

Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Supplying installation testing and commissioning of 100 watt LED 6000K asymmetric new generation energy saving and environment long life versatile pressure die cast aluminum IP66 roadway luminaries with high power LED light source complete etc. as required housing reflector and enclosed with toughened glass complete with all accessories, Philips/Bajaj/Crompton/Halonix/Havells (Model HSLD-15-100-CWDL-R01). (A/R)

Please Enable Macros to View BoQ information