Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹20.8 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹36.5 L+₹2.3 L (6.74%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹38.4 L+₹4.2 L (12.4%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹39.5 L+₹5.3 L (15.6%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹42.7 L+₹8.5 L (24.9%)Rejected-Finance | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
IMPROVEMENT OF BATHROOM, TOILET AND KITCHEN AT SUNJUWAN UNDER GE JAMMU
2023_MES_600070_1
GEJC-27/2023-24
Open Tender
Civil Works
Item Rate
200 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
4 Aug 2023
1 Jun 2023
29 Jun 2023
1 Jun 2023
27 Jun 2023
15 Jun 2023
Amount
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminuous primer conforming to IS : 3384-1986 @ 0.25 Iitres/Sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for applying two coats of aluminium paint on membrane surface all as specified and directed.
Supply only liquid water proofing compound complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished fair and even without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 5 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement including and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of oil bound distemper over and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for preparing new plastered surfaces and applying two coats of cement based paint over and including one coat of primer complete all as specified and as directed.
Material and labour for preparing new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of steel over 10cm width or girth including rubbing down by sand paper and applying two coats of synthetic enamel paint over and including one shop coat of red oxide zinc chrome of steel surface over 10cm width or girth complete all as specified and as directed.
Material and labour for cleaning of water storage tank 500 litres completely by removing all scale dirt / dust of any description with chlorine complete all as specified and as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost.
Material and labour for cleaning of water storage tank 1000 litres completely by removing all scale dirt / dust of any description with chlorine complete all as specified and as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost.
Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.
Description all as per Ser item No. 14.00 here-in-before but figured glass, pin head type complete all as specified and as directed.
Demolition of lean / cinder concrete filled in sunken slab, wire brushing the surface, cleaning all loose dirt by dusting / watering sunken portion of water closet, Toilet etc and applying cement slurry @1.5 kg per Sqm complete all as specified and as directed.
Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.
Material and labour for any coloured non skid jointless ceramic tiles 6 to 7 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge complete all as specified and as directed.
Description all as per Ser item no 19.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in cemnt mortar (1:4) complete all as specified and as directed.
Material and labour for colored vitrified ceramic tiles 10 mm thick, area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc of tiles, over and including 15 mm thick screed bed or bedding layers of cement mortar (1:6) complete all as specified and as directed at site.
Material and labour for coloured glazed ceramic tiles glossy finish of size 450 x 300 x 5-6mm thick in dado’s / skirting etc (1st quality) set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge including 10 mm thick cement mortar (1:4) complete all as specified and as directed.
Material and labour for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) and taking down old one complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 18-20 mm thick over and including 20 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC all as specified and directed.
Material and labour for providing water proofing treatment to sunken floors all as given below: - (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in cement mortar (1:4) mixed with CICO super @ 100ml per 50 Kg cement on treated surface. (f) PCC (1:5:10) type E-2 in sunken area.
Supply and fixing galvanised iron tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI Marked.
Supply and fixing galvanised iron tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI Marked.
Supply and fixing in repairs bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed including cutting walls and making good surfaces. Note: - Including making good of surface as existing including tiling, color wash, distempering, plastering etc.
Supply and fixing in repairs chromium plated pillar taps, with capstan heads, chromium plated, screwed down high pressure of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repair looking mirror with PVC moulded frame and hard board back white colour of size 450 x 600mm complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.
Supply and fixing in repairs PVC valveless syphon action type low level flushing cistern 8 - 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed.
Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed.
Supply and fixing in repairs chromium plated shower rose with arm and not.less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.
Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and as directed.
Supply and fixing in repair 125 mm dia steel grating with or without hole complete all as specified and as directed.
Supply and fixing in repairs bib tap standard of PTMT any colour screwed for iron pipe and fixed of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 32mm ISI marked complete all as specified and as directed.
Supply and fixing in repairs PVC seat cover for EWC, white colour including chromium plated hinges complete all as specified and directed at site.
Supply and fixing in repairs chromium plated jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed.
Supply and fixing in repairs PVC over head tank cover / Lid of size suitable for capacity of above 500 litres and upto 1000 litres capacity complete all as specified and directed.
Supply and fixing in repair of aluminum (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
Supply and fixing in repair 1000 litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 500 litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
Supply and fixing in repair stainless steel kitchen plate rack made out of not less than 1mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, countersunk oval type of size 550 x 400 mm excluding tap but including fixing to RCC slab and chromium plated waste coupling complete all as specified and as directed.
Supply and fixing in repairs Vitreous China urinals, Vitreous China urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
Supply and fixing in repairs gun metal globe or gate valve with iron wheel head 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends 110 mm radius complete all as specified and as directed.
Supply and fixing in repair 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and as directed.
Supply and fixing in repairs brass chromium plated mixer of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws / nails to timber frame work as in shelves, cup board shutters, book case etc including plain fillets square or rectangular of second class hard wood not exceeding 3 Sqcm in leaping to shutters / shelves complete all as specified and as directed.
Supply and fixing in repair 30mm wide flap (when open) stainless steel continuous (piano) hinges, bright finish or electro galvanised fixed to Kitchen cupboard complete all as specified and directed.
Material and labour for non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
M/S RAVINDER SINGH
M/S ELECTROMATICS
M/S Sukhmani Construction Co.
M/S TRIKUTA BUILDERS
Bidder Name
M/S VED PAUL MAHAJAN
M/S TRIKUTA BUILDERS
M/S RAVINDER SINGH
M/S Sukhmani Construction Co.
M/S ELECTROMATICS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .