Kikral village Estt for repair of water works Const of Boosting Station laying of DI pipe line and Providing Functional House Hold Tap Connection FHTC under JJM Category II

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear water pump set (For Boosting Station ) 400 LPM, 45 mtrs head (7.50 BHP)

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear water pump set (at WW for filling of B/stn) 400 LPM, 40 mtrs head (5.00 BHP)

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pump set 400LPM 45 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 400 LPM x 45 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pump set 400LPM 40 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB)b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T)c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T)d) CT 100/3 Nos. (AE/KAPPA/L&T)e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 400 LPM x 40 M Head Motor (L&T Siemens, ABB)h) Capacity KVAR as per site requirement) Indicating Lamp - One Set) change over switch 63 amp 1No.

Supply and fixing following CI D/F pipe and sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from in the collecting tank up-to the rising main laid by the deptt. as per plan shown from the foundation well of pump chamber for all raw water and clear water pumping set at w/w in position as per specification given in schedule No.II B) CI D/F pipes 150mm i/d

Supply erection testing of ISI marked copper wire for 3 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.

Providing and fixing of complete floating arm and floating drum fabricate of GI sheet of 16 gauge with M.S. bolts made of M.S. flat and C.I. flange welded on it with collar one side and other side wire mash welded to prevent foreign elements to enter in floating arm fixed with CI swell bend with C.I. base plate fixed with anchor bolts in water tank haudi 8" i/d Floating arm complete in all respect as per specification of Engineer-In-Charge

Supply erection, testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduct pipe & copper wire etc. as per approved specifications. (Water works & B/stn)

Providing & fixing ceiling fan 1400 mm 56" with speed adjuster make (make Crompton, usha, Bajaj) complete in respect.

Providing and fixing of ½" mm GI elbow complete in all respect and the entire satisfaction of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of ½" mm GI socket complete in all respect and the entire satisfaction of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Bidder Name

Amount

The Siwani Sadhbhawna Co op LC Society Ltd(GSTN-NA)

BALJIT SINGH CONTT(GSTN-NA)

The Siwani Sadhbhawna Co op LC Society Ltd

The Siwani Sadhbhawna Co op LC Society Ltd