REPAIR/MAINT OF WATER SUPPLY PIPE LINES IN KWC AREA UNDER GE (I) RND DELHI

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out complete all as specified and as directed.

All as per item Ser No. 1.00 above but in hard/dense soil and like.

Returning, filling in and including spreading, levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing surplus soil to a distance exceeding 1.5Km but not exceeding 5.0 Km and depositing where directed at a level above the starting point complete all as specified and as directed.

M&L for Brick work in CM (1:4) with sub class 'B' bricks in CM 1:4 above ground level not exceeding 1.5mtr in height from ground level including demolition of old unserviceable brick work complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for rendering 10 mm thick on brick work/concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed .

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/ wall/ floor of size 15mm bore complete all as specified and directed.

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/ wall/ floor of size 20 mm bore complete all as specified and directed.

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/ wall/ floor of size 25 mm bore complete all as specified and directed.

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/ wall/ floor of size 40 mm bore complete all as specified and directed.

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/ wall/ floor of size 50 mm bore complete all as specified and directed.

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/ wall/ floor of size 80 mm bore complete all as specified and directed.

Supply and laying in repair GI pipe medium grade ISI marked including all new fittings in old position in trenches/wall/ floor as directed of size 100 mm bore complete all as specified and directed.

Supplying, Laying, jointing, testing and commisioning in replacement of old unserviceable DI Pipe of 150 mm bore size, with spigot and socketed ends centrifugally cast Class K-7, Push on joint confirming to IS 8329 laid in trenches complete all as specified and directed.

Supplying, Laying, jointing, testing and commisioning in replacement of old unseviceable DI Pipe of 100 mm bore size, with spigot and socketed ends centrifugally cast Class K-7, Push on joint confirming to IS 8329 laid in trenches complete all as specified and directed.

Supplying, Laying, jointing, testing and commisioning in replacement of old serviceable DI Pipe of 80 mm bore size, with spigot and socketed ends centrifugally cast Class K-7, Push on joint confirming to IS 8329 laid in trenches complete all as specified and directed.

M&L in replacement DI fittings of old unserviceable for spigot/socket pipes such as bends of any radius and angle, collars, tapers, tail pieces, Tee pieces, Caps and plugs suitable upto 150 mm bore dia all socketed or socket and spigot or side flanged complete all as specified and directed.

M&L in repair for burning out lead joint in any position including removing old lead joint and making new lead joint by using the retrived lead and adding minimum 700 gram new lead for CI pipe of 150mm bore pipes complete all as specified and directed.

M&L in repair for burning out lead joint in any position including removing old lead joint and making new lead joint by using the retrived lead and adding minimum 500 gram new lead for CI pipe of 100mm bore pipes complete all as specified and directed.

M&L in repair for burning out lead joint in any position including removing old lead joint and making new lead joint by using the retrived lead and adding minimum 400 gram new lea for CI pipe of 80mm bore pipes complete all as specified and directed.

M&L in replacement for Rubber Gasket Joint (tyton joint) including jointing material for DI/CI pipe of size 150 mm bore dia, complete as specified and directed.

Supplying, laying jointing testing in replacement MS pipe,of dia 80 mm Heavy duty class 'C' confirming to IS - 1239, laid in trenches or laying on floors for connections to centrifugal pump sets for suction, pump to header and to connected out-going water mains, complete all as specified and directed. Note : Welded flanges will be measured and paid seperately.

Supplying, laying jointing testing in replacement MS pipe,of dia 100 mm Heavy duty class 'C' confirming to IS - 1239, laid in trenches or laying on floors for connections to centrifugal pump sets for suction, pump to header and to connected out-going water mains, complete all as specified and directed. Note : Welded flanges will be measured and paid seperately.

Supplying, laying jointing testing in replacement MS pipe,of dia 150 mm Heavy duty class 'C' confirming to IS - 1239, laid in trenches or laying on floors for connections to centrifugal pump sets for suction, pump to header and to connected out-going water mains, complete all as specified and directed. Note : Welded flanges will be measured and paid seperately.

M&L for welding to flanges on ends for MS pipe of dia 80 mm, flange not less than 15 mm thick complete all as specified and directed.

M&L for welding to flanges on ends for MS pipe of dia 100 mm, flange not less than 15mm thick complete all as specified and directed.

M&L for welding to flanges on ends for MS pipe of dia 150 mm, flange not less than 15mm thick complete all as specified and directed.

M&L for Joints with rubber or fibre board gasket of size 80 mm complete with nut, bolt and double washers complete all as specified and directed.

M&L for Joints with rubber or fibre board gasket of sizes 100 mm complete with nut, bolt and double washers complete all as specified and directed.

Supply & Fixing ,in replacement of old unserviceable cast iron Sluice Valve PN -1.0 of dia 50 mm ISI marked confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and directed.

Supply & Fixing ,in replacement of old unserviceable cast iron Sluice Valve PN -1.0 of dia 80 mm ISI marked confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and directed.

Supply & Fixing in replacement of old unserviceable cast iron Sluice Valve PN -1.0 of dia 100 mm ISI marked confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and directed.

Supply & Fixing , in replacement of old unserviceable cast iron Sluice Valve PN -1.0 of dia 150 mm ISI marked confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and directed.

Supplying & Fixing , in replacement of old unserviceable cast iron Sluice Valve PN-1.0 of dia 200 mm ISI marked confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and directed.

Supply and fixing in replacement of old unserviceable CI Non Return Valve PN-1.0 of dia 50 mm with GM seat, ISI marked, including flange joints such as packing, nut and bolts etc complete all as specified and directed.

Supply and fixing in replacement of old unserviceable CI Non Return Valve PN-1.0 of dia 80 mm with GM seat, ISI marked, including flange joints such as packing, nut and bolts etc complete all as specified and directed.

Supply and fixing in replacement of old unserviceable CI Non Return Valve PN-1.0 of dia 100 mm with GM seat, ISI marked, including flange joints such as packing, nut and bolts etc complete all as specified and directed.

Supply and fixing in replacement of old unserviceable CI Non Return Valve PN-1.0 of dia 150 mm with GM seat, ISI marked, including flange joints such as packing, nut and bolts etc complete all as specified and directed.

Supply and fixing in replacement of old unserviceable CI Non Return Valve PN-1.0 of dia 200 mm with GM seat, ISI marked, including flange joints such as packing, nut and bolts etc complete all as specified and directed.

Supplying and fixing in replacement of old unserviceable foot valve, flanged type of dia 80 mm with strainer confirming to IS:4038 with flanged ends of following size complete all as specified and directed.

Supplying and fixing in replacement of old unserviceable foot valve, flanged type of dia 100 mm with strainer confirming to IS:4038 with flanged ends of following size complete all as specified and directed.

Supplying and fixing in replacement of old unserviceable foot valve, flanged type of dia 150 mm with strainer confirming to IS:4038 with flanged ends of following size complete all as specified and directed.

Labour only for cutting of existing CI / DI pipe of dia 80 mm for insertion of CI specials pipe/valves etc. all as required including dewatering of leakage water at same place complete all as specified and directed.

Labour only for cutting of existing CI / DI pipe of dia 100 mm for insertion of CI specials pipe/valves etc. all as required including dewatering of leakage water at same place complete all as specified and directed.

Labour only for cutting of existing CI / DI pipe of dia 150 mm for insertion of CI specials pipe/valves etc. all as required including dewatering of leakage water at same place complete all as specified and directed.

S&F in repair Float valve of size 15mm bore dia with epoxy coated aluminium rod and high density PVC ball complete all as specified and directed.

S&F in repair Float valve of size 20mm bore dia with epoxy coated aluminium rod and high density PVC ball complete all as specified and directed.

S&F in repair Float valve of size 25 mm bore dia with epoxy coated aluminium rod and high density PVC ball complete all as specified and directed.

S&F in repair Float valve of size 40mm bore dia with epoxy coated aluminium rod and high density PVC ball complete all as specified and directed.

S&F in repair Float valve of size 50 mm bore dia with epoxy coated aluminium rod and high density PVC ball complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of size 15 mm bore dia complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of size 20 mm bore dia complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of size 25 mm bore dia complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of size 40 mm bore dia complete all as specified and directed.

S&F in repair gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of size 50 mm bore dia complete all as specified and directed.

S&F in replacement flanged water meter woltman type of dia 50 mm including gasket, nut, bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed.

S&F in replacement flanged water meter woltman type of dia 80 mm including gasket, nut, bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed.

S&F in replacement flanged water meter woltman type of dia 100 mm including gasket, nut, bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed.

S&F in replacement flanged water meter woltman type of dia 150 mm including gasket, nut, bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed.

S&F in replacement Strainer Y type conforming to IS, size 80 mm (3”) dia complete all as specified and directed.

S&F in replacement Strainer Y type conforming to IS, size 100 mm (4”) dia complete all as specified and directed.

S&F in replacement Strainer Y type conforming to IS, size 150 mm (6”) dia complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for mild steel work MS as in sheet, angle iron, flat iron etc including cutting and welding etc and including dismantling old unserviceable mild steel work complete all as specified & directed

S&F in replacement of old unserviceable PVC rotational moulded polythelene water storage tank(cylindrical vertical with closed top) triple layered of capacity 2000 ltrs hoisted & fixed in position complete all as specified and directed.

All as per item No 67 but of capacity 3000 Ltrs.

All as per item No 67 but of capacity 5000 Ltrs.

All as per item No 67 but of capacity 10000 Ltrs

M&L for bocky system under path/road to pass the GI/CI/DI Pipes upto 150 mm dia manually as directed.

S&F in replacement 3 pole power contactor type ML-1.5, 415 Volts, 50 HZ range 25 Amps complete all as specified and directed.

S&F in replacement 3 pole power contactor type ML-2, 32 Amps, 415 Volts, 50 HZ complete all as specified and directed.

S&F in replacement 3 pole power contactor type ML-3, 40 Amps, 415 Volts, 50 HZ complete all as specified and directed.

S&F in replacement 3 pole power contactor type ML-4, 70 Amps, 415 Volts, 50 HZ complete all as specified and directed.

S&F in replacement 3 pole power contactor type ML-6, 110 Amps, 415 Volts, 50 HZ complete all as specified and directed.

S&F in replacement of Bimetal over load replay type ML 1.5, starter type MNX, relay range 14-23 Amp complete all as specified and directed.

S&F in replacement of Bimetal over load relay type ML 2, starter type MNX, relay range 20-32 Amps complete all as specified and directed.

S&F in replacement of Bimetal over load relay type ML 3, starter type MNX, relay range 28-42 Amps complete all as specified and directed.

S&F in replacement of Bimetal over load relay type ML 4/6, starter type MNX, relay range 45-75 Amps complete all as specified and directed.

S&F in replacement of Bimetal over load relay type ML 5, starter type MN, relay range 66-110 Amps CT operated complete all as specified and directed.

S&F in replacement of old unserviceable PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, single core, 1100 volts complete all as specified and as directed.

All as per item No 82 but size 4 Sqmm

All as per item No 82 but size 6 Sqmm

All as per item No 82 but size 10 Sqmm

All as per item No 82 but size 16 Sqmm

All as per item No 82 but size 25 Sqmm

S&F in replacement of 3 Pole MCCB, 250 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified & directed

S&F in replacement of 3 Pole MCCB, 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified & directed

S&F in replacement of 3 Pole MCCB, 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA complete all as specified & directed.

S&F in replacement of 4 Pole MCCB, 250 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified & directed.

S&F in replacement of 4 Pole MCCB, 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified & directed.

M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron wire 4mm dia by means of Copper nuts, bolts and washers. GI wire laid in 20mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion with following :- (a) GI wire 4 mm dia (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil, PCC, earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick plaster in cement mortar 1:6 including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bars 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for earthing complete with copper plate electrode 600mmx600mmx3.15mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. Copper plate connected with copper earth strip 20x3mm by means of nuts, bolts and washers. Copper strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) as shown in electrical plat No. 03 of SSR Part-I with following:- (a) Copper strip 20x3mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick re-inforced with 8mm dia mild steel TMT bars 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L copper strip 20mmx3mm buried in ground including necessary excavation & earth work in soft/loose soil and removal of excavated material to a distance n.exc 50 mtrs and deposited where directed including taking out old unserviceable copper strip complete all as specified & directed.

Supply and laying in replacement of old unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 core including suitable size Aluminium lugs properly crimpled with crimping tools including testing complete all as specified and directed

Supply and laying in replacement of old unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 core including suitable size Aluminium lugs properly crimpled with crimping tools including testing complete all as specified and directed

Supply and laying in replacement of old unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sqmm 3.5 core including suitable size Aluminium lugs properly crimpled with crimping tools including testing complete all as specified and directed

Supply & laying Clean dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and as directed. Note : Punned thickness shall be measured.

Supply and laying in trenches burnt brick sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable all as specified and directed.

M&L for Lead wool complete all as specified & directed.

M&L in repair of mild steel Nuts, Bolts and Washers 25 to 150 mm long of 6 to 20 mm dia complete all as specified & directed.

M& L in repair of Gland dori as per requirement & directed.

S&F in repair Digital ammeter of existing size 100mm (Square type) and connecting up complete all as specified and directed.

S&F in repair Digital Voltmeter of existing size 100 (Square type) and connecting up complete all as specified and directed.

S&F in repair Electronic timer type ET-100, 9 to 30 sec, 415V suitable for star-delta/DOL starter upto 20 HP capacity complete all as specified & directed.

S&F in repair Relay of current range 10 to 16 amps, 415 volts suitable for mounted on ML-1.5 and ML-3 Contactors complete all as specified & directed.

S&F in repair Relay of current range 28 to 42 amps, 415 volts suitable for mounted on ML-2 and ML-3 Contactors complete all as specified & directed.

S&F in repair 3 phase Sequencer complete all as specified & directed.

Supplying and laying in replacement of CPVC pipes of outer dia 16 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified..

Supplying and laying in replacement of CPVC pipes of outer dia 20 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified..

Supplying and laying in replacement of CPVC pipes of outer dia 25 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified..

Supplying and laying in replacement of CPVC pipes of outer dia 40 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified..

Supplying and laying in replacement of CPVC pipes of outer dia 50 mm, SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supplying and laying in replacement of Unplasticised PVC pipes of dia 15 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supplying and laying in replacement of Unplasticised PVC pipes of dia 20 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supplying and laying in replacement of Unplasticised PVC pipes of dia 25 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supplying and laying in replacement of Unplasticised PVC pipes of dia 40 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supplying and laying in replacement of Unplasticised PVC pipes of dia 50 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in replacement of CPVC Ball Valves, with brass threaded (two sided), 16 mm (1/2”)dia complete all as specified and directed.

S&F in replacement of CPVC Ball Valves, with brass threaded (two sided), 20 mm (3/4”)dia complete all as specified and directed.

S&F in replacement of CPVC Ball Valves, with brass threaded (two sided), 25 mm (1”)dia complete all as specified and directed.

S&F in replacement of CPVC Ball Valves, with brass threaded (two sided), 40 mm (3/2”)dia complete all as specified and directed.

S&F in replacement of CPVC Ball Valves, with brass threaded (two sided), 50 mm (2”)dia complete all as specified and directed.

S&F in replacement of UPVC Ball Valves, of size 16 mm (1/2”)dia complete all as specified and directed.

S&F in replacement of UPVC Ball Valves, of size 20 mm (3/4”)dia complete all as specified and directed.

S&F in replacement of UPVC Ball Valves, of size 25 mm (1”)dia complete all as specified and directed.

S&F in replacement of UPVC Ball Valves, of size 40 mm (3/2”)dia complete all as specified and directed.

S&F in replacement of UPVC Ball Valves, of size 50 mm (2”)dia complete all as specified and directed.

S&F in replacement of motor of domestic RO of capacity 100 GPD complete all as specified and directed.

S&F in replacement of SV-SLX- of domestic RO complete all as specified and directed.

S&F in replacement of Membrane ECO of domestic RO complete all as specified and directed.

S&F in replacement of Inline of domestic RO complete all as specified and directed.

S&F in replacement of UV LED of domestic RO complete all as specified and directed.

S&F in replacement of UV barrel of domestic RO complete all as specified and directed.

S&F in replacement of SMPS 24 of domestic RO complete all as specified and directed.

S&F in replacement of Float Valve of domestic RO complete all as specified and directed.

S&F in replacement of SPUN Filter of domestic RO complete all as specified and directed.

S&F in replacement of Outer Bowl of domestic RO complete all as specified and directed.

S&F in replacement of Water TAP of domestic RO complete all as specified and directed.

S&F in replacement of elbow of domestic RO complete all as specified and directed.

S&F in replacement of PVC Pipe (90 mtr) of domestic RO complete all as specified and directed.

S&F in replacement of Membrane Houseing of domestic RO complete all as specified and directed.

S&F in replacement of Motor 150 GDP of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of HPS of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of NRV of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of SvSLX 02 (Qty) of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of Membrane 02 No of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of Spun10" filter of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of CTO 10" of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of GAC 10" of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of elbow 3/8'' (6Qty) of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of SMPS 24 V (3 amp) of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of Inline of Industrial RO of capacity 25 ltr complete all as specified and directed.

S&F in replacement of Bowl (03 Qty) of Industrial RO of capacity 25 ltr complete all as specified and directed.

S& F in replacement of Motor 150 GDP (02 Qty) of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of SPUN 20" of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of CTO 20" of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of GAC 20" of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of 20" Bowl (03 Qty) of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of SV SLX (04) of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of Membrane ECO (04 Qty) of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of 3/8'' elbow (10 Qty) of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of SMPS (03 AMP) of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&Fin replacement of HPS of Industrial RO of capacity 50 ltr complete all as specified and directed.

S&F in replacement of NRV of Industrial RO of capacity 50 ltr complete all as specified and directed.

M/s Wazer Enterprises

Pradeep Bros

SAWARIYA ENGINEERS AND CONTRACTORS

AARYANS GLOBAL INDIA