Repair, Renovation and Modernisation of District Library at Dibrugarh under CIDF

Amount

Doing patch work in roof slab / raft slab necessary by laying small portions of' Polymer modifled mortar sand mortar (in Prop 1 : 4) mixed with 100% acrylic polymer master crete M - 81 of Choksey Chemicals / Dr. Sealkit Sealcrete (Asian Chemical)

Plain cement concrete apron in prop 1 : 4 : 8 with 20 mm down graded coarse agg. Over soling including neat cement f nish using cement slurry 2.75 Kg. of cement per Sq. m of floor ( Soling to be measured separately) a) 35 mm thick

Repairing of spallcd concrete in columns by the following processes as specified and directed by the department complete at all levels: F) Plastering with high rich polymer modified mortar 10 mm thick with cement sand mortar in prop 1: 4 mixed with 100 % acrylic polymer Master Crete M - 81 / Dr. Sealkit Sealcrete (Asian Chemicals) / RHEOMIX 131 of BASF @ 15 % by weight of cement followed by ....

18 mm thick Marble stone slab flooring risers and including treads and risers of steps, skirting, dado, walls, pillar laid over 10 mm thick base of cement plaster 1 : 3 laid and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels 18 mm thick marble stone tiles in flooring including risers and treads of steps, skirting, dado, walls, pillars laid with 10mm thick base of cement plaster in prop 1 : 3 jointed with grey cement slurry including rubbing and polishing comp with marble tiles of specified quality and shade at all levels. (A) With 18mm thick marble stone Liles of size 600 mm X 600 mm (ii) Marwat Slab

Providing VITRIFIED floor tiles of approved quality of specified size shape and thickness not less than 15mm on floors, skirting risers and treads of steps over l5mm thick base of cement mortar in prop 1: 3 including cutting ... completed as directed. A) ON FLOOR (a) Normal Range Somany /Orient / Nitco / Varmora / VITA / Marbito make. ii) Of size 600 mm X 600 mm and above

Providing fitting and fixing powder coated pressed steel door frame made of 1.25mm /1.60mm thick sheet of various size with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly ... completed as directed. a) 1.25mm thick sheet i) Size 90mm X 60mm (Single Sheet)

Providing and fixing flush door shutter solid core construction frame of 1st Class Hard Wood with cross band and face veneered ply wood face panels conforming to relevant I.S Code including oxidized iron butt hinges (100mm X 75mm X 3.50mm) 6 nos. with necessary wood screws b) Non Decorative Type Face Panel and Block Board Core (ii) 35mm thick

Providing Ceramic wall Tiles of approved quality, size) shape and thickness not less than 8 mm thick in prop 1 : 3 including cutting where necessary finis ..... completed as directed. c) Deluxe Range Somany / Orient / Nicto / Asian lake ii) Of size 300 mm X 450mm and above

Demolishing CC Floors of various thickness including top layer and base course and disposal of debris as directed for all levels

: Distempering two .coat with oil bound distemper of approved brand and manufacture and of required shade on new wail surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after thoroughly broming the surface free from mortar droping and other foreign matter and also including preparing the surface even and sand papered smooth. (ii) Top Coat

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian Paint / Berger Paint / ICI Paint / J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust etc. completed as directed. (i) Surfaces over 100mrn in width or girth . . (b) High Gloss (Asian Paint/Berger Paint/ICI Paint/J & N Paint/Nerolac)

Providing fitting and fixing anodized aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars, Joints mitred and welded (manufactured to relevant I.S specifications) and fitted with 6 min X 3.15 mm lugs 100mm.. (b) Fixed windows and ventilators i) 6 mm clear glass

Providing fitting and fixing anodized aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant LS specifications) and providing and fixing handles angle completed as directed. (a) 2 Track Sliding Window iv) 5mm clear glass

Providing fitting and fixing anodized aluminium framed double leaf glazed doors with partition walls partly glazed and partly prelaminated boards with anodized aluminium frame made of 100 m x43mm x 2mm sections of approved brand with door styles of size ... i) 6mm thick glass panes and 12mm prelaminated board

Providing fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodized aluminium section of approved brand of size 101 mm x 44.50 mm by providing ... i) Partly 6 mm thick coloured refectory glass and partly with prelaminated board

65mm thick cc floor consisting of 50mm under layer of cc in prop. 1:3:6 and 15mm thick wearing layer in cc in prop. 1:1:2 ....... Complted as directed.

Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement including rounding of junctions with floor b) 20mm thick

Applying one coat of cement primer approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth.

Cement concrete works in tipping 1 : 1 : 2 on RCC floor, tread and rise of steps finished with a floating coat of nee: cement using cement slurry for bond @ 2.75 Kg. of cement per Sq. m 0: floor to be laid in panels including curing complete as directed (b) 20mm thick

Finishing Old /New wall with water proofing weather coat smooth anti- fungal exterior painting of approved make of Berger Paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Providing and fixing stainless steel (Grade 304) railing made of Hollow Tubes, Channels, Plates etc. including welding, buffing polishing and making curvature (wherever reqd.) and fitting the same with necessary stainless steel dash fasteners, stainless steel bolts etc. of reqd. size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer I-Charge (For payment, only wt. of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts bolts, fasteners etc. will be considered)

Providing pre painted galvanized Iron sheet (PPGI) at all levels including fitting? and fixing self drilling, self tapping screws complete (Roof Trusses Purlines etc. to be measured and paid separately) TATA Blue Scope/Dyna Roof / Durakolor/Wonder Roof or equivalent as directed by the department

Providing Plinth protection with brick flat laid in cement mortar 1 : 4 and finished with 15mm thick cement plaster in prop 1 :2 with a floating coat of neat cement finish.

Providing drain with cement concrete (1 : 3 : 6) 10cm thick sides 10cm thick bed over brick flat soling including 15 mm thick cement plastering in prop 1 : 3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth. ii) 300mm wide and average 250 mm deep with bed slope 1 in 150mm with initial depth of 100mm

Supplying fitting and fixing anodized aluminium decorated grill with anodized aluminium rectangular frame of 'F' and ‘H’ section fitted with walls, columns or stiffeners by special type of screws us per specification by the department for all levels.

Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm X 600mm of 13 mm / 15 111m thickness to be placed in E - Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600mm long, Cross Tee 1200mm / 600mm long and Wall Angle. The Wall Angle. (A) Everest Designer Ceilings or Equivalent as directed by the department (Primered) a) Using 13mm thick ceiling tiles.

Supplying, fitting and fixing Sound Smooth MB (NSS Primer) with glass wool of Anutone Acoustic Ltd. Including Primer all fixtures and fittings. a) 20mm

Providing dressed wood work in post walls post plate bressumers etc. including supplying and fitting fixing with spikes and nails, bolt and nuts of 12mm dia (M.S) and required length etc. complete with kiricide oiling two coats to faces in contact…………completed as directed. c) With Bonsum / BolaTimber

Earth work in excavation for foundation trenches or walls, retaining walls, footings or column steps septic tank etc. including refilling (return filling) the quantity as necessary after completion of work breaking clods in return filling dressing watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level (a) In Ordinary Soil

Earth sand filling in plinth in layers not more than 250mm thick necessary carriage watering ramming etc. complete as directed as specified including payment of land compensation forest Royalty Sales Tax and other duties and taxes as may be necessary (C) With river sand or silt (Predominantly non Plastic) by truck carriage including loading and unloading.

Providing brick soling in foundation and under floor with stone / best quality picked Jhama Brick, sand packed and laid to level and in panel after preparing the sub grade HS directed including all labour and materials and all necessary dewatering complete. (a) Brick on flat soling

Plain cement concrete works with coarse aggregate of sizes 13mm in foundation bed for footing steps walls brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately) (a) In prop. 1:3:6

Supplying fitting and fixing in position reinforcement Bars conforming to relevant I S code for R C C work / R.B walling including straightening cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20 G annealed black wire, and placing in position with proper blocks supports chairs spacers etc. complete (up to 1st floor level) details design complete . a ) From Primary Producer : TATA / SAI/Esser Steel/Jindal / Shyam Steel/RINL iii) Super Ductil (SD) TMT Reinforcement Bars

(c) ISI approved M.S. Rod

Extra over above item for each subsequent floor or part thereof above 1st floor

Providing form work of ordinary timber planking so as to give a Rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ-reinforced concrete and plain concrete work in . Foundation footing, base of columns pile cap raft and mass concrete works etc. i) Using 25mm thick plank

Sides of tie beams grade beams etc. at or below ground level (ii) Using 25mm thick plank

Collumns, piller, posts & strut a) Square, rectangular, polygon, in plan or any shape like Tee/L etc. Having plan vertical face. ii) Using 25mm thick plank

Sides and soffits of beams beam hunching an bressumers lintels and horizontal ties. (a) for depth not exceeding 1.0 m (ii) Using 25mm thick plank

Flat surfaces such as soffits of suspended floors landing canilever slabs sajjas balconies and the like. (a) Floors etc. Upto 200mm in thickness (ii) Using 25mm thick plank

Providing form work of 12mm thick plywood board so as to give a Rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ-reinforced concrete and plain concrete work in Columns, pillars, posts & strut of square / rectangular/polygon or any shape like T/L etc. Having plane vertical face.

Sides and soffits of beams beam hunching an bressumers lintels and horizontal ties. (a) for depth not exceeding 1.0 m

Flat surfaces such as sophist of suspended floors, roofs landing cantilever slabs, chajjas balconies and the like. Floors etc. Upto 200mm in thickness

Vertical surface such as walls (any thickness) Parapet walls partitions and the like including attached pilasters, buttresses, plinth and string courses and the like

Extra over above item for each subsequent floor or part thereof above 1st floor

Providing and laying Plain / Reinforced Cement concrete works cement with coarse sand & 20 mm downgraded stone aggregate including dewatering if necessary and curing complete but c. eluding cost of form work and reinforcement for reinforced cement concrete work ... completed as directed. i) Using mixture machine A ) In Sub - Structure up to Plinth Level Foundation footing columns with base tie and plinth beam pile cap base lab retaining walls of septic tank inspection pit and the like and other works not less than 100mm thick up to plinth level (N) Without using admixture plasticiser ( b) M20 or Pro p 1 : 11/2: 3

(B) Super Structure from Plinth Level Up to 1st Floor Leve1 ii) Columns, Pillars, Posts, Struts, Suspended Floor, Roof, Landing, Shelf and Support Balcony, Lintel, Silt Band, Beam, Girder, Bressumer, Cantilever, Staircase (Except Spiral Staircase and Landing) including preparing the Top Surface and Finishing of Nosing (N) Without using admixture plasticiser

Extra over above item for each subsequent floor or part thereof above 1st floor

Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirting’s, risers and treads of steps over 15 mm thick base of cement mortar in prop 1 : 3 including cutting ……completed as directed. (i) With Fix - A - Tile (Choksey / Sike / Pedelite / Roug)

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. A) In sub-structure up to plinth level including dwaatering if necessary b) In prop 1:4

1 st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1 st floor level (Protruding M.S. Rod / Tor Steel of column to be embedded in cement mortar and will be measured and paid separately) (A) 1121nm thick brick wall a) In cement mortar in Prop 1 : 4

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level (a) 112 mm thick brick wall.

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections i) Square Section (ii) Rectangular hollow Section of specification RHS/SHS and (iii) M.S. Circular Hollow Section of Gard. a ) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. Code 4923 : 1997.

Providing pre painted galvanized Iron sheet (PPGI) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof Trusses Purlines etc. to be measured and paid separately) TATA Blue Scope / Dyna Roof / Durakolor / Wonder Roof or equivalent as directed by the department. iii) 0.50mm thick

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) On rough side ( b) In Cement Mortar 1 : 4

Extra over above item for each subsequent floor or part thereof above 1st floor level including curing complete as directed a) On single coat plaster

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (B) On fair side ( b) In Cement Mortar 1 : 4

Providing fitting and fixing M.S. Grill of required pattern for windows / clerestory windows opening with M.S flats at required in frame all round square or round M. S. bars with round beaded bolts and nuts or screws. i) Ornamental Grill b) Fixed to brick work PCC/RCC 25mm x25mm

Finishing Old/New wall with water proofing weather coat smooth anti- fungal exterior painting of approved make of Berg rain cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Providing two coats of Birla White Wall Care Putty water Resistant White Cement based putty for concrete / mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, etc. Completed as directed. a) 1.5mm thick

Applying primary coat over new steel and other metal surface up to 100mm in width or girth after preparing the surface by thoroughly tease dirt and other foreign matter and scoured with wire steels wood scrapers and sand paper. a) with ready mixed "red lead/red oxide" primer

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger Paint / ICI Paint / J & N Paint / Nerolac) to give an even ding cleaning the surface of all dirt dust .... Completed as directed. a) Surface over 100mm in width or girth b) High Gloss

Supplying fitting fixing and painting where necessary (one coat primer and two coats of paint) M / F suspended ceiling which includes G.I. Perimeter channels of size 0.55 mm thick (having one flange of 20 mm and another flange of 30 mm and a web of 27 mm) ..... Ceiling section of 0.55 mm thickness having knurled with of 51.5 mm and two equal flanges of 26lnnl each with lips of 10.50 mm are then fixed to the intermediate channel with the help of connecting. clip and in direction perpendicular to the intermediate channel. (i) 9.50mm thick

Providing fitting and fixing vitreous China flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions etc. completed including painting of fittings and brackets cutting and making good the walls & floors wherever required. (B) Hindware Make (a) White (ii) FB 610x410x380 (Cat no. 6002)

Providing fitting and fixing vitreous China squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader and brass unions etc. complete including painting of fitting and brackets cutting and making good the walls & floors wherever required (A) Parryware Make (i) White (Cat No. C0503)

Providing fitting and fixing vitreous China Pedestal Type water closet (European Type W.C. Pan 400 mm high) with seat and lead, CP brass hinges and rubber buffers; CI / MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryeare make a) White i) Universal closet S Trap (c. N C027I) (Anglo Indian, Inclusive of seat cover)

Supplying, fitting and fixing- PVC flushing cistern with all internal fittings with CI brackets including", fitting and fixing standard size CP f1ush pipe union clamps etc. complete as directed and specified (Pipes will be measured separately) II) Deluxe Single Flush.

Providing vitreous China Wash Basin with CI / MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets cutting and making good the wall wherever required (Pillar cock stop cocks waste coupling are to be paid separately) 1.13.2: Basin (Without Pedestal)

Supplying, fitting and fixing PVC pipes of 6 Kg. / Cm2 (Supreme / Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 110mm dia

(ii) 63 mm dia

Supplying fitting and fixing approved PVC pipes of different sizes with all necessary 'R' brand or similar approved PVC fitting such as bend tee elbow reducer nipple plug long screw fitting clamps etc. complete at all levels including below G f) Exposed or in trenches . SUPREME / PRINCE / SFMC BRAND or other equivalent approved brand (high pressure pipe sch - 40) b) 40mm dia

c) 25mm dia

c) 15mm dia

Supplying fitting and fixing C.P. bib cock 15 mm dia directed and specified (I) Essco make (delux / Sumthing spl / Tropical) a) Bib cock short body

Supplying fitting and fixing Chrome plated (CP) stop Cock of approved brand of size as mentioned below and directed and specified (GI & CP pipes will be measured and paid separately) Agm. Brand

Supplying fitting and fixing of floor mat.

Labour for test boring with 40 mm dia G.I. pipes including' keeping surplus of earth and every 2.00m after 3.00 m depth

Supplying fitting and fixing suction pipes plain / bevel ended conforming to relevant IS codes of practice including supplying and fitting of accessories' lowering of assembly pipes concentrically in the casing pipes complete as directed. (A) GI pipe a) TATA/SAIL (medium) (iii) 40mm

Supplying fitting and fixing brass tez filter 2.00 mtr. long

Supplying fitting and fixing Hand Pump for 40mm dia Tube Well with all accessories complete as directed. ii) Mayur

Providing and fixing in position suspended false ceiling using E.- Grid (Exposed Ceiling Suspension 2430 System) of Gird size 600 mm X 600 mm / 1200 mm -X 600mm with main runner 38 X 24 mm cross tee 29 mm x 24 mm & wall angle 24 mm X 24 mm. Using 4mm / 6mm thick High P …… . Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade /make over a coat of cement primer before installing it on the Girt.. (A) Standard Ceiling of Everest Make or Equivalent as directed by the department. i) Using 4 mm thick F.C. Board.

Supplying fitting and fixing double leaf heavy duty ate frame made from 50mm X 6mm MS Flat Iron with another Hal flat at the middle 201nm dia MS bars at 200mm apart dia MS 200 mm apart from bottom flat to middle flat including drilling etc. complete all vertical bars are to be protruded at least above the middle and top flat is be flattened and pointed as directed. Necessary locking arrangement closing the gate and 2 nos. (minimum) strong iron hinges of M S bars and flat of same sizes on each leaf be embedded in CC brick pillars as necessary including a red oxide painting to all iron works as directed and specified (separate payment will be made for posts)

Providing drain with cement concrete (1 : :3 : 6) 10cm thick sides 10 cm thick bed over brick flat soling including 15 mm thick cement plastering in prop 1: 3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth. i) 300mm wide and average 250 mm deep with bed slope 1 in 150 mm with initial depth of 100mm

Construction of Granular sub - base by providing close graded materials spreading in uniform layers with motor grader on surface, mixing by roller to achieve the desired……. a) Using Grading 1 material

b) Extra lead beyond initial lead of 5.00 km

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 5658 – 2006 thickness 80 mm and 28 days compressive strength not less than 30N/M over a layer of bedding sand of compacted thickness 30 mm

Auditorium chair (Full Executive) Brand

Auditorium chair (Mid Semi Executive) Brand

Installation Charge

Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Short point upto 3.00metre length.

Medium point upto 6.00 length.

Long point upto 10.00metre length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in existing surface conduit wiring system including connection as required. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. copper conductor cable

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. copper conductor cable

Supplying fitting and fixing of ceiling fan regulator including connections etc. complete as required. Electronic Type type

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Premium model 1400 mm Sweep. (ORIENT PSPO make) /Premium model 1400 mm Sweep SS-390 Deco. Havells make)

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Long point up to 10.00 metre. Length.

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 63A

Supplying with fitting and fixing panel mounting open execution 50KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.5-1, neutral adjustable with earth fault protection and with rotary handle Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 50 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make) 400 A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 40A

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 4.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe

6.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe

Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured, extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3.5 A2XY 35 Sq.mm 3 and 1/2 core unarmoured cable

Core - 4 A2XY 16 Sq.mm four core unarmoured cable

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in existing recessed conduit wiring system including connection as required. With 3 x 16 sq. mm. + earth continuity with 2x6 sq. mm. cable

Supplying including installation, testing and commissioning of different type of LED LUMINARIES as directed an specified by the department. SM440L I 6xLED-HB/3000/ 4000/ 5000/ 2700K 24V CQC, CE SM440L I 6xLED-HB/3000/ 4000/ 5000/ 2700K 24V CQC, CE VAYA COVE WHITE, 3000/ 4000/ 5000/ 2700K, 0.3 M, CQC, APR

Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying , fitting & fixing of LED Bulb non-dimmable in the existing batten/angle holder as required and as directed by the deptt. 12 watt. Bulb.( Accepted rate of CE PWD BLD )

Supply fitting & fixing of LED Kubic batten Tube light fitting 300 mm lenth as required and as directed by the deptt. 20 watt ( Accepted rate of CE PWD BLD )

Supplying installation, testing and commissioning of 10 passenger (680 Kg.)/ lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators 1 No. 2. Type Passenger Elevator 3. Capacity Passenger -10 Persons - 680 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Type of Drive Variable Voltage ,Variable Frequency Drive with Microprocessor based Simplex Full Collective Control. 6. Location of Machine Room Top 7. Available Travel 10.8 Metres. ()maximum) 8. Serving , Ground Floor to 3rd Floor, 4 Stops 4 Levels 4 Openings 9. Well Size (Required) , 1950 mm Wide x 2050 Deep over the finished surface 10. Power Supply , 415 V three-phase 50 cycles AC 11. Auxiliary Required , Single-phase 220 V 50 cycles AC 12. Car Size (Clear Inside) 1300 mm Wide x 1350 mm Deep approx. 13. Required Pit Depth 1600 mm ()mandatory) 14. Required Head Room 4800 mm. 15. Car Enclosure Stainless Steel Car hairline finish 16. Flooring PVC Flooring 17. Electric Light Fluorescent Light Fittings 18. Fan 300 mm sweep 1 No. 19. No. of Entrances One Location - Front. 20. Car Entrance Centre opening stainless steel power door with vision panel 21. Landing Entrance , Centre opening stainless steel power door with vision panel 22. Clear Opening , 800 mm Wide x 2000 mm High 23. Indicators: Car & Landings ,Direction & Position Indicator 24. Other Features Battery Operated Emergency Alarm and Light. Call registration LEDS . OSG Electronic Switch. Fire drive. 2 Intercom System Full length Infra-red Door Safety. Auto Rescue Device.

Supplying ,installation ,testing and commissioning of the following intregal flood lighting luminaries conforming to IP-65/IP-66 suitable for vertical and horizental mounting applications pressure die cast powder coated alluminium alloy housing with corrosion resistence powder coating nano technology transparrent injection moulded poly carbonate UV stabilizer diffuser having high impact strength to wistand min IK09 with high power LED and unique flood optics to ensure uniformlight distribution and maintainance free system ideal for area lighting ,high mast lighting ,sports lighting and billboard.The luminaries should be equipede with external surge protection device to wistand 10 KV/5KV including connection with 2.5 sq.mm 3core PVC insulated round copper conductor as required and as directed by the department . BVP120 LED 35 CW FG SI PSU GR

BVP120 LED 70 CW FG SI PSU GR

Supply ing ,installation ,testing and commissioning of pressure diecast powder coated aluminium alloy housing frosted PC diffuser, IP65/IP66 protection with built in LED of the following Post Top luminaries suitable for 38mm dia post top mounting application including connection with 2.5 sq.mm 3 core PVC insulated round copper conductor as required and as directed by the department . a. Cropton NEBULA CAT LPTM-40-CDL

ace consortium