Providing Additional amenities and Elevation arrangements for the Construction of District Fire Office building and Fire and Rescue Service Station building at Shevapet in Salem City.

Providing Aluminium partition wall top with 1/3 5.5mm thick plain glass and bottom with 2/3 Novapan sheet 12mm tk. The outer frame top and bottom using rectangular box section No.9221 of size 101.50x44.450x2.0mm at weight of 1.975 kg/m and section vertical as well as horizontal using rectangular box section No.9222 of size 63.50x38.10x2.0mm at weight of 1.174 kg/m with accessories and furniture fittings including cost of materials required brass screws

Providing and filling the tile joint with epoxy grout withfollowing specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc., complete.

Manufacturing, supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304l grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. the vertical pipe has to be welded to the 100 x 100 x 6mm ms base plate encased in the base concrete.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade.

Supplying and fixing of Tamil Brass Letters of 25CM including charges for fixing, conveyace charges etc., and as directed by the departmental officers.,

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 500 Litres

Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table E, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers.

Supplying and fixing of follwing Parpapet Glass Railing arrangements including cost of materials, Labour charges for fixing without damaging the existing Structure, Loading and Unloading etc., (The materials should got approved by the Executive Engineer before use) a) 12mm Clear Toughened Glass

b) Bottom Figuard with wooden finish

c) 40mm slot pipe top & vertical with wooden finish

Supplying and fixing of Structural Glazing arrangements of 5mm Tinted annealed glass,1.75” x 1.75” curtain wall aluminium section with black powder coated,L angle, silicone ,abro tape including cost of materials, Labour charges for fixing without damaging the existing Structure, Loading and Unloading etc., (The materials should got approved by the Executive Engineer before use)

Transportation and conveyance charges for shifting Elevation arrangements materials for Parapet Glass Railing and Structural Glazing from Store to site etc., and as directed by the departmental officers.

Supplying and applying wall patty of approved make (ISI) for smooth finishing the old cement plastered walls for roller painting including cost, labour charges for applying, patty blade, scaffolding etc., all complete and as directed by the departmental officers. (The wall patty should be got approved from the EE before use)

Core cutting in concrete slab 100mm to 200mm for pipe rooting for suitable dia 100mm to 300mm using electrically operated core cutting machine for the slab, beams as per the standards including electric charges for core cutting machine and cost of core cutting but labour charges etc., all complete and as directed by the departmental officers.

Removing hard rock by wedging chiseling and Trimming to proper shape where blasting is prohibited including cost of tools, plants, equipments and materials required for the process and clearing the debris away from the site labour charges etc., all complete as per relevant standard specification and as directed by the departmental officers.

Supplying and fixing of Laser Cutting M.S. Plate with M.S. Frame with One coat of Red Oxide Primer includign charges for Cutting, welding etc., and as directed by the departmental officers

Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete.

Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

Please Enable Macros to View BoQ information