PROVN OF YOGA ROOM, VIEW CUTTER, WIRE MESH DOOR, DESK NCO OFFICE WITH UNCLAIMED PROPERTY STORE, GARAGE, OFFICE COMPLEX AND REFRIGERATOR OF AGE B/R AND AGE E/M UNDER GE TENGA

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation of RCC post or struts complete all as specified and directed

M&L For framed work in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of black japan paint over a coat of red oxide complete all specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all specified and directed.

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M& L for cleansawn Second class hard-wood scantlings with framed work.complete all specified and directed

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

S&F 35 mm thick 2nd class hard wood factory made particle boards punched ply glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats. complete all as specified.

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed all as specified as directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-inCharge.

M&L for preparation of new wooden surface of plywood and wood based material of any description not otherwise describred over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

Surface dressing n exc 15 cm deep in soft/dense soil complete all as specified and directed by engr in charge

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth, for foundation and getting out in hard/dence soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick, in hard dence soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for cement concrete in foundations, filling and mass concrete D2, 1:4:8 (40 mm graded agg)

M&L for rein-forced cement concrete (Nominal Mix) 1:2:4 Type B1 (20 mm graded agg) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete

M&L reinforced cement concrete (Nominal Mix ) Type B1 1:2:4 (20 mm graded aggregate) for beams, cantilevers, bressummers, lintels over 1.5m span

M&L for rein-forced cement concrete (Nominal Mix) 1:2:4 Type B1 (20 mm graded agg) as in Columns, pillars, piers, posts and struts

M&L for rein-forced cement concrete (Nominal Mix) 1:2:4 Type B1 (20 mm graded agg) as in Chajjas

Use and waste form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions of Square, Circular rectangular on plan or polygonal

Nature of Work : PROVN OF YOGA ROOM, VIEW CUTTER, WIRE MESH DOOR, DESK NCO OFFICE WITH UNCLAIMED PROPERTY STORE, GARAGE, OFFICE COMPLEX AND REFRIGERATOR OF AGE B/R & AGE E/M UNDER GE TENGA.

Use and waste flat Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide

M & L for PCC 1:3:6 type C1 (20 mm graded agg) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cm 1:6 etc complete

M&L for 10 thick rendering in CM 1:6 on fair faces of brick wk or concrete surface finished even and smooth without using extra cement

(REVISED)

Supply only integrated water proofing compound

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Mild steel TMT bars 6 to 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for preparation of newly plastered internal surfaces of walls and applying two coats of oil bound distemper,over a coat of primer complete all as specified

Material & Labour for preparation of newly plasterd surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm screed bed of CM 1:4 as specified complete all specified and directed.

M & L for providing 4mm thick "E" Board in ceiling with galvanised iron snap frame of 'T' section 24 x 38 x 0.70 mm wall/ceiling angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction incl two coat of oil bound distemper anirected.d one coat of white wash complete all as specified and directed by engr in charge.

Supply and fix 30mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane

Supply and fix 100 mm long MS butt hinge medium weight cold rolled in panelled doors and flush doors

Supply and fix 75 mm long MS butt hinge medium weight cold rolled in PVC Doors

Supply and fix aluminium anodized barrel tower bolt 125 mm long extruded section.

Supply and fix aluminium anodized barrel tower bolt 100 mm long extruded section.

Supply and fix 125 mm size aluminium anodized handle fabricated type

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. complate all specified and directed

S&F Mild steel flat iron as in hold fasts, clamps,wall ties,bands,straps supports or stay for rain water etc.

S&F MS window guard bars, window frames etc articles confirming to Fe 290-0 or E-165.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290(Gde E-165)

M&L for two coats of synthetic enamel paint to steel surface over a coat of red oxide primer exc 10 cm width ot girth incl preparation of new surfaces

M& L for Hardcore of guage exc 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/ rammed to a true surface

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded agg ) as cement concrete in sub-base floors and pavings etc complete all as specified

M&L for 25 mm thick PCC 1:2:4 type B2 (using 40 mm graded agg ) as cement concrete in sub-base floors and pavings etc complete all as specified

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded agg ) as cement concrete in sub-base floors and pavings etc complete all as specified

M &L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and directed

M&L for chequed cement concrete tiles 20cm X 20cm X 25 mm/30 cmX30 cmX25 mm thick, set jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for 50 mm thick thick plain cement concrete type C-1 1:2:4 (40 mm graded stone aggregate) as in plinth protection, finishing the top surface even and smooth w/o using extra cement

M&L for Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane 4.8 mm complete all as specified and directed

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for PCC 100mm thick, type B-2, 1:2:4 (using 40mm graded sone agg) in sub-floors, sub-base, floors and pavings etc.complate all specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed by Engr -in-Charge

M&L for providing cement concrete type B1 (1:2:4) using 20 mm graded agg in roof kerbs or mud stops, rounded or chamfered on edges

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm

M & L for PCC 1:2:4 type B1 (20 mm graded agg) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cm 1:4 etc complete

M&L for preparation of newly plastered wall surface and applying two coats of cement base paint over one coat of primer

S&F of Formwork square or rectangular to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. complate all specified and directed

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm screed bed of CM 1:4 as specified complete all specified and directed.

M&L for Virified Ceramic tiles light Shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 Sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm rendering of CM 1:4 as specified complete all specified and directed.

M&L for Virified Ceramic tiles light Shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 Sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4) on brick or concrete walls surfaces as backing coat complete all as specified and directed.

Use and waste flat Formwork to chullah hoods, chajjas, troughs and similar items including edges

M&L rolled mild steel for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 290 (Gde E- 165).complate all specified and directed

M&L for 2nd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed

S&F 32mm dia waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms).

S & F fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

Supply and fix chromium

plated brass Bib taps,cast copper alloywith crutch or butterfly handle, screwed down for iron pipe for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. complate all specified and directed

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed

S&F PVC (SWR) bends any radius with access door, 110mm dia.complate all specified and directed

S&F PVC (SWR) bends any radius with access door, 75mm dia. complate all specified and directed

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.complate all specified and directed

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. complate all specified and directed

S&F for PVC Low density polyethylene (LDPE) flexible waste pipes 32mm dia of pressure rating 6 kgf/sq. cm for wash basin complete all specified and directed.

S&F in 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complate all specified and directed

S&F in 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complate all specified and directed

S&F PVC connection of 15 mm size with PTMT nuts of length 600 mm.complate all specified and directed

S&F Grating doom 100 mm dia with with waste hole of PTMT (mminium weight 25 gms)

Supply & Fix in vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified

S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complate all specified and directed

S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia complate all specified and directed

S&F of Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. coFe-410-W(Gde E-250) quality B

Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge.

M&L for PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lorpayment purpose.), area exceeding 2.00 sqm each

M&L for Flush shutters 30 mm, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 113 here in before One 3 pin socket outlet, 6 Amps on the same board with other switches, with cables 1.5sq. mm size

All as per item No. 113 here in before but for one 3 pin socket outlet 6 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 113 here in before but for one 5 pin socket outlet 16 Amp and 6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 6 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type

Supply & fixing switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S&F LED lamp 9/10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min).

Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.

Supply and fixing LED l

uminaire 600 mm x 600 mm, 35/36 watt, (warm/white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbers of clamps, all fixing arrangements such as fastners, bolts, nuts washers etc all as specified and directed.

S&F DB double door TPN 4 way sheet phospetised powder painted with 200 Amps rated bus bar 415 Volts neutral link, IP 43 protection double door type fixed on wall duly grouted in solid block or wooden board complete all as specified and as directed

S&F MCCB 4 pole 415 Volts, 50 Hz, 16 KA of capacity 100 Amps complete all as specified and as directed

S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V, 'C' curve complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V, 'C' curve complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

S&F for XLPE cable insulated PVC bedded 1100 Volts grade heavy duty cable with PVC solid insulated multistranded aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 16 sqmm 4 core section complete all as specified and directed.

S&F of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of size 16 Smm 2 core.

Supply and laying Double wall corrugated HDPE duct pipe 80mm outer dia confirming to IS: 14930 (Part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fix sheet metal enclosures for double door DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of following sizes.

Supply and Fixing Refrigerator, single phase AC 230 Volts, 50 Hz (BEE certified) with minimum 3 star rating single door, having nominal storage capacity of 180 ltrs complete all as specified and as directed by E-in-C.

Supply, Fixing, connecting and testing, automatic voltage stabilizer, wall mounted type, single phase, naturally air cooled, indoor type designed for input variation between 170 to 250 Volt and out put voltage stabilised at 230 Volts with accuracy of (+) 2.5% and capacity 0.5 KVA complete all as specified.

Supply & fixing Modular switch 1 way 6A,1 module, 240 Volts complete all as specified & directed.

Supply & fixing Modular switch 1 way 16A,1 module, 240 Volts complete all as specified & directed.

Supply & fixing Modular Socket, 6A - 5 pin combined 2 module, 240 Volts complete all as specified & directed.

Supply & fixing Modular Socket 6A/16A - 5 pin combined 2 module, 240 Volts complete all as specified & directed.

S&F modular White cover plate with frame 03 module

S&F modular White cover plate with frame 04 module

S&F modular Metal flush box 3 module

S&F modular Metal flush box 4 module