INTERNAL ELECTRIFICATION WORKS OF 4 (FOUR) NOS. OF COMMUNITY HALL AT ST. MARYS -TUNG SAMASTY, UNDER K.E.E.D., KURSEONG, GTA.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casing capping and Switch board both on surface]

b) Average run 6 mtr

c) Average run 8 mtr

(a) On Board

(d) Average Run 3 mtr.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

(c) 2 x 56/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

(d) 2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Legrand Make 2+8 way

S & F 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Legrand Make 6-32A SP

Legrand Make 40A DP

Supply & fixing sheet steel main switches on angle frame on wall 32A 240V (Havells Make)

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only bulk head ceiling fitting on wall/ceiling by screws etc.

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Fixing exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing 2 * 1/1. 40 P.V.C. insulated and sheathed wire and making connection for exhaust fan of dia:-

Fixing only cabin fan on wall/ceiling by S&F rag bolt, nuts & washer (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts.long and 1 x 19/8 stranded GI (Hot Dip) wire (4 Mts. long), 25mm dia x 150 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm diaGI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (ii) No.6 SWG

Supplying & fixing 50mm dia x 5.24 metre long (incl. bends) GI pipe vertical type service bracket on wall for carrying 2 wires and an earth wire complete with Galv. MS clamps for stay, insulators and earth wire, 7/14 SWG stranded GI (Hot Dip) Stay wire with 230x31 mm dia straining screws, 75x88 mm porcelain shackle insulators with Galv. (Hot Dip) strips, bolts, bush etc. incl. painting

Supplying and Installing Off-grid Solar PV street light 24 watt LED complete with suitable crystalline silicon solar |cells and must have a certificate of testing conforming to |IEC 61215 Edition |/ BIS 14286 from an NABL or IECQ accredited Laboratory power output of the module under STC should be a minimum of 120Wp, minimum 12.8V, 65 AH capacity Lithium Ferro Phosphate Battery providing minimum of 2 days backup as per MNRE specifications including all necessary wiring with 7 mtr. GI pole

Supply only 20W LED Tube Light (Make - Havells/Philips)

Supply only 9W LED Bulb (Make - Havells/Philips)

Supply only 50W LED flood light (Make - Havells/Philips)

Supply only decorative wall lamp (Make - Havells/Philips)

Supply only 50W LED street light (Make - Havells/Philips)

Supply only bulkhead light of (Make - Havells/Philips)

Supply only Chandilier (Make - Philips/Havells)

Supply only Ventilating fan (Havells - Ventil Air DX HS white)

Supply only wall fan (Havells make - 450 mm Tornado - Wall II)

Supply only 2 core 10 sqmm aluminium unarmoured cable

WBSEDCL charges for meter connection and Sign Board

Add GST @ 18%

Add Labour Cess @ 1%

Please Enable Macros to View BoQ information