REPAIR REPLACEMENT TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN MISC WORKS IN ZONE F OF AGE BR I AREA UNDER GE MIS MHOW

Amount

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM (1:4) mixed with Dr fixit pidiproof LW 200ml/50Kg of cement on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 mixed with Dr fixit pidiproof LW 200ml/50Kg of cement on ceiling concrete surface finished even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid separately .

Supply ony liquid water proofing compound

M&L for preparation of newly plastered surfaces of wall , pilesters,cornices etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for newly plastered wall surface and applying two coats of oil bound distempering over a coat of Chawlk whiting/cement based wall primer and all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M & L for vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 16 above but in skirting over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M& L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

All as per item no 19 above but in skirting including 10mm thick backing coat in CM (1:4 ) complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX30mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

Demolition of cement concrete exceeding 15cm in depth , of any description and in any position not otherwise specifically provided for ,including removal of concrete debries from site to a distance exceeding 500 metre all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection,finished the surface of concrete topping even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand , laid in alternate bays complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 25mm thick as in floor, finish the surfaces even and smooth with using extra cement complete as specified and directed.

M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

M & L for cutting holes in brick walls built in cement mortor Exc one one brick but not exc two bricks at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

M&L for provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old surface as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 using 12.5mm graded stone aggregate as in required slope, average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or other equivalent as approved by GE. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying first coats of Dr fixit fastflex with a stiff nylon brush and leave 4 to 6 hours for dry. (d) Applying second coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the first coat) and leave 4 to 6 hours for dry. (e) Applying third coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the second coat) and leave 4 to 6 hours for dry. Note: (a)WPT Shall be done through approved applicator certified by Manufacturer (b)Liquid WPC shall be measured & paid seperately under relevant item.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) and squatting pan and trap, including connection to trap, and to fushing pipe , anti syphonage pipe complete including making good to floor all as specified and directed.

Supply and fix in repair of wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S&F in repairs pedestal pattern vitreous china wash down water closet pan white colour including 110mm PVC (SWR) 'P' Trap including necessary jointing with run lead , front or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe , plastic water closet seat cover white closed pattern with flat bottom and cover complete as specified and directed.

S&F in repair vitreous china uninal bowl, half stall coloured, with PTMT urinal spreader for fixing with 15 mm dia pipe, union for discharge pipe , providing and fixing plugs, bedding urinals against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in white cement complete all as specified and directed.

S&F in repairs urinal spreader of PTMT any colour suitable for 15 mm dia pipe. (Minimum weight 60gms)

S&F in repairs mild steel chromium plated health fucet with 1m SS tube and hook all as complete specified and directed

S&F in repairs fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified .

S & F in repair CP brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified

S & F in repair of CP fancy type stop valve ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S& F in repairs CP Fancy type Angle coack one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified

S&F in repair CP fancy type Stop Valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S&F in repairs of CP brass fancy type shower rose 15mm dia with 125mm long CP nipple of approved quality complete all as specified

S&F in repairs vitreous china urinal half stall white coloured with automatic urinal spreader including providing and fixing plugs,securing urinal against wall in cement mortar 1:2 long brass screw pointing around urinal back in white cement with brackets, flush pipe,grating and union for discharge pipe all as specified and directed.

S&F in repair CP Toilet paper holder complete all as specified

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guilties embedded in cement mortar (1:3) with MS screws etc complete all as specified

S&F in repair LDPE pipe 32mm bore fixed to wall / ceiling with bends / elbow complete all as specified.

S&F in repair stainles steel grating round type of 150mm size (Minimum weight 100 gms) complete all as specified

S&Fin repair PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 litres complete all as specified and directed.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F PVC waste pipe 32mm dia n.exc 1.50 m length fixed to any type of coupling complete all as specified

S&F in repair rotational moulded polythylene water storage tank of 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 25mm bore complete

M&L for Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

All as per item no 55 above but tank exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified and directed.

All as per item no 55 above but tank exceeding 1000 litres but not exceeding 2000 litres capacity complete all as specified and directed.

S&F in repair of water storage tank Cover any size of Tank capacity complete all as specified and directed.

S&F in repair of gun metal gate valves 20 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

S& F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long complete all as specified & directed.

S&F in repair PVC (SWR) floor trap 75mm dia of outlet ,plain with grating including jointing with solvent cement complete all as specified

S&F in repair PVC (SWR) multi floor trap 75mm dia of outlet ,plain with grating including jointing with solvent cement complete all as specified

S&F in repair PVC body bath room cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete, Model No 555 of PRAYAG or other equivalent as approved by GE complete all as specified and directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified

S&F in repair of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified

S&F PVC (SWR) branch pice, single (Single Y) equal or unequal 110mm size

S&F PVC ( SWR) bends any radius bore of 110 mm

S&F PVC ( SWR) bends any radius bore of 75 mm

S&F in repairs 25mm dia stainless steel curtain rod as all as specified and directed.

S&F in repairs stainless steel decoarative brackets suitable for curtain rod of 25mm dia complete all specified and approved by GE .

Taking up or down steel tubing 15mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded, etc complete all as specified

S&F factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar dovetailed or welded complete all as specified.

S&F factory made steel ventilator fixed type with glazing bar complete all as specified and as directed

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed.

S&F second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F pressed steel frame of size 105X60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified and directed.

S&F pressed steel frame of size 125X60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

Haking out old brocken glass pan of any size ( upto G+3 Storied building) thickness,size,quality or description) from wooden frames or stone,concrete or brick ,glazed with putty or fixed with beads all as specified and directed.Note: Glass repairing work shall be carried out upto G+3 Storied building .

S & F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed by Engineer - in - Charge .

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan incl hacking out complete all as specified and directed.Note: Glass repairing work shall be carried out upto G+3 Storied building

Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed.

S&F Mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering all as specified

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 100mm long butt hinges aluminium alloy with galvanised mild steel hinge pin,anodised and fixed B-22

S&F in repairs 100mm long butt hinges aluminium alloy with galvanised mild steel hinge pin,anodised and fixed B-22

S&F in repair 100mm long butt hinges medium weight cold rolled mild steel

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F in repairs 150 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F 150 mm size aluminium anodized handle complete all as specified

S&F in repiars 150 mm size aluminium anodized handle complete all as specified

S&F in repairs mild steel ordinary rat tail rod pattern spring of 300mm size including roller & roller plate complete all as specified

S&F in repairs aluminium floor door stopper double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm in girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm in width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

S&F in repair 18/19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame work inculding 6 mm thick teak wood lipping edging on all sides complete all as specified and directed.

S&F in repair 19mm thick priliminated particle board both sides with decorative choice including necessary second class hard wood 6mm edging for cup board all as specified and directed

S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F Continuos ( piano) hinges mild steel, bright finish or electro galvanized 30mm width flap ( When open) type all as specified and directed.

S&F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with scrwes of 100mm size all as specified

S&F in repairs Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with scrwes of 100mm size all as specified

S&F 100 mm size aluminium anodized handle complete all as specified

S&F 100 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

M&L for welding in repairs not exceeding 2.5 cm in length to the thickness of metal to be welded 9mm but n.exc 20mm complete all as specified and as directed.

M&L for preparation of surfaces of bldg No plate / tab of any size and apply one coat of synthetic enamel paint and writing letters or figures (Block, Roamn, Italic or Indian) of not less than 50 mm height and not less than15mm width including stops, commas, lines etc complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete.

S&F false ceiling at all heights with integral densified calsium silicate reinforced with fibre and natural filler false ceilling tiles of size 595X595mm of approved texture, design and pattern pinhole 8mmthick semi perforated square edge tile having NRC ( noise reduction cogfficient ) of 0.50 (minimum) Light refluctance of 85% (minimum) Non combustable as per BS : 476 (PART-4) fire performance as per BS : 476 ( PART 6&7) humidity resistence of 100% thermal conductivity <0.043 W/m K as per ASTM 518:1991, intrue horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized iron section on proffile,stitched duoble webbed white with 1mm reveal proffile ( White/black) comprising of main-T runner of size 15X 32mm of lenght 3000mm, cross-T of size 15 X 32 mm of lengh 1200mm and secondary intermediate cross-T of size 15 X32mm of lengh 600mm to form grid module of size 600X600mm,from ceiling using galvanized mild steel item, 8mm outer daimeter M-6 dash fasteners, 6mm dia threaded hanger rod and L- shape leval adjuster of size 85X25X2mm Galvanized iron perimeter wall angle of size 19 X 19mm of lenght 3000mm to be fixed on periphery wall /Partition with the help of plastic rawl plugs at 450mm centre and 40mm long dry wall SS screws.NOTE: The work shall be carried out as per specifications and , drawing and all as per direction of Engineer-in-Charge.

Taking down aluminium frame with shutters of any size complete all as spd and directed

Taking down shutters of any description n exc 1.50 sqm each complete all as spd and directed

S&F anodised aluminium frame for doors, windows,ventilators with one or more rebates including cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repairs Double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs of Aluminium (extruded section) body Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Chitragupta Construction

M/s Himgiri construction