Replacement of Old street light into new LED street light into new LED Street light and High mast in Civil Hospital at Mandikhera in Distt Nuh

Amount

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work 4 pole MCCB 6 amp to 100 amp , 25 K

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole

40 amp to 63 amp. MCB's FOUR POLE

Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work: M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in 1 :2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level.

EARTHING AND LIGHTENING ARRESTOR Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

Extra for using salt and char coal/coke for pipe earth electrode as required

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

LT CABLE Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core

25 sqmm to 50 sqmm Cable 2 to 4 Core

Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work 16 sqmm

STREET LIGHT Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm

B.S.E.N.10025 High Mast Supply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm & 4mm (minimum) Top Dia= 150 mm and Bottom Dia= 410mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)

RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 16m high mast pole

MISCELLANEOUS ITEMS S/E mark double walled corrugated (DWC) HOPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HOPE pipe 63/50 mm outer dialinner dia

Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm).

Supply and erection of ard. Aluminium Cable in existing pipe trench with necessary connection. 16 Sq. mm 4 Core Ard. Cable .

25 Sq. mm 4 Core Ard. Cable .

35 Sq. mm 4 Core Ard. Cable .

Supply and erection of ard. Aluminium Cable on surface / cable tray etc. as required 16 Sq. mm 4 Core Ard. Cable .

25 Sq. mm 4 Core Ard. Cable .

35 Sq. mm 4 Core Ard. Cable .

Supply of 200W Flood light required to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work.

Supply & erection of 70/72W Street light on 7 mtr pole required to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work.

Supply & erection of Single bracket 1500mm long bracket made from 48.3 OD ERW pipe for octagonal pole required to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work.

Supply & erection of Double bracket 1500mm long bracket made from 48.3 OD ERW pipe for octagonal pole required to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work.

Supply and erection of Double door sheet steel superline/ Powerline Vertical distribution boards suitable for TP/ FP veritcal MCCBs upto 125 amp as incomer (but without cost of MCCB) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (load line) Make Indoasian or equivalent model of Havells/ standard 4 way load line

Supply and erection of 32 amp. 3 pole/ 230 volt - digital time switch for controlling the street light with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.

Charges of boaring upto 2.5 mtr. below the gound level treanchless horizental by HDD machine (for laying the cable & pipe) with cost of plain 50mm dia HDPE pipe and cost of laying including all labour and material required to complete the job in al respect complete up to entire satisfaction of Engineer in Charge with cost of laying & 50 mm plane HDPE peipe

Digging of pucca road for laying of Cable/pipe (Depth 9" width 4") in Pucca road with filling of trench including repair of road as per satisfaction of Engineer-in-charge of work.

KKM Engineering Solutions Pvt. Ltd.

Highlight Associates and Contractors

SUNGLOW ELECTRIC POWER PVT. LTD.