Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.2 L+₹4.4 L (11.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹47.4 L+₹9.7 L (25.5%)Rejected-Finance A 103 VEERA GARDEN AMBEDKAR NAGAR ALWAR 301001 RAJ | ALWAR | RAJASTHAN | 301001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹47.5 L+₹9.7 L (25.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹47.8 L+₹10.1 L (26.6%)Rejected-Finance PLOT NO 261 SHANTI KUNJ ALWAR 301415 RAJ | ALWAR | RAJASTHAN | 301415 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
DAY TO DAY MAINTENANCE, PETTY REPAIR TO MD/OTM ACCN AND PERIODICAL SERVICES FOR MD ACCN UNDER AGE B/R-II AT ITARANA CANTT ALWAR
2023_MES_594482_2
8153/E8
Open Tender
Civil Works
Item Rate
240 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
GE Alwar
₹90,000
Yes
7 Aug 2023
3 Jun 2023
12 Jun 2023
3 Jun 2023
10 Jun 2023
5 Jun 2023
3 Jun 2023 - 5 Jun 2023
Amount
Taking down cement plaster of any description on walls, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.
M&L demolition of concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M&L fly ash brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.
M&L rendering 15mm thick, plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L rendering 10mm thick, plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces fair and even complete all as specifed and directed.
M&L 5mm thick rendering in CM 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 25mm thick cement concrete type B-0, 1:2:4, (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.
M&L coloured non skid ceramic tiles (1st quality) 7 to 8mm thick area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm as in floors etc laid over and including 15mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L glazed ceramic tiles (1st quality) (coloured) 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L glazed ceramic coloured tiles (1st quality) in vertical surface 450mm x 300mm x 7-8mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L coloured vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc including 15mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 14.00 above but in skirting over and including 10mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed.
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.
M&L 16-18mm thick granite black colour (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, staircase treads and like jointed over and including 15mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.00 Sqm each.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) not exc 2.0 Sqm each.
S&F mild steel framed work using angle iron, flat iron, round bars as in security doors/gates with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors, walkways railing frame work amd similler work confiming to Fe 290, grade E-165 all as specified and directed.
M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of distemper oil emulsion over a layer of 2mm thick wall care putty complete all as specified & directed.
M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of cement base paint over primer with alkali-resistant primering paint complete all as specified & directed.
M&L preparing plastered or unplastered new surfaces of ceiling & applying three coats white wash complete all as specified & directed.
M&L prepararing old surfaces of ceilings and applying one coat of white wash complete all as specified & directed.
M&L preparation of old wall surfaces by washing rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion white or tined on walls including cornices etc complete all as specified and directed.
Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 4 mm thick ordinary sheet glass fixed with clips and oil putty/ wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.
All as per item No 26.00 above but 4 mm thick figured glass, pin head type.
Hacking out old broken glass from metal/aluminium frame incl punching or drilling out old glazing pins/springs/clips/ beading and providing & fixing new of any thickness/size of any description and S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing in square exc 0.5 sqm in each pane complete all as specified.
Hacking out old broken glass from metal/aluminium frame incl punching or drilling out old glazing pins/ springs/clips/ beading and providing & fixing new of any thickness/size of any description from aluminium / steel frame and M&L 5.5mm thick sheet glass, frosted on one side in square in each pane complete all as specified.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
S&F in repair 12mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified & directed.
S&F in repair MS drapery rod 19/20 mm dia fancy type with PVC coloured sleeves fixed with suitable brackets two Nos & PVC colour bowl two Nos at end for door/window complete all as directed.
S&F in repair CP mild steel conduit pipe 19/20mm dia as in curtain rod including suitable brackets and fittings complete all as specified.
S&F in repair door closer hydraulically regulated, designation No 3, aluminium (die cast) body, universal type (ISI marked) complete all as specified & as directed.
S&F in repair brass mortice lock, vertical type, size 65mm, 2 levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.
S&F in repair MS helical door spring 300mm size with roller & roller plate fixed to wooden or steel frames with screws/welding as required at site complete all as specified.
S&F in repair MS retractable hinge fixed to wooden or steel frames with Screws/welding as required at site complete all as specified.
S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as specified.
S&F in repair extruded aluminium alloy handle, fabricated type, anodised, 125mm size (ISI marked) complete all as specified.
S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
S&F in repair butt hinges 100mm long medium weight cold rolled MS, wooden or pressed steel/angle iron frames by welding all as specified.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed.
S&F in repair MS steel window stay 300 mm long for steel windows all as specified and directed.
S&F in repair handles left & right for steel windows all as specified and directed.
Running welding in repairs not exceeding 6mm thick all as specified and directed by Engineer-in-Charge.
Welding in repair not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed.
Taking down shutter of any description not exc 1 sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.
Taking down shutter of any description exc 1 sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.
Checking and attending to complaints of water leakage from bib taps, stop cock, pillar taps, flushing cisterns, wash hand basins, urinal, wall mixer/basin mixer, angle valve, concealed valve,shower rose, health faucet & jet, float valve of any type & size or any other water supply fittings/fixtures incorporated in plumbing works not mentioned here in before used any where in the bldgs which is causing obstruction to water supply in area & requires plumbing including carrying out minor repair such as replacement of washers, check nuts, tightening of fittings of flushing cistern or any other repair not mentioned herein before etc using petty materials like washers, thread (soot),Teflon tape, M-seal, screws(any size), nails (any size) or any other material not mentioned here in before to make water supply /plumbing lines & fittings/fixtures functional and leak proof to the satisfaction of the occupants/users. Note: i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from B/R-II complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints. (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail. [Quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding]
Checking of joinery (wooden/steel) iron/ aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door etc including petty repairs material like screws / nails, plug etc to make it functional. Note : (i) Contractor or his authorised representative collect such type of complaints from AGE B/R-II Complaint Cell at 8.30 AM on daily basis except sunday /holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made double the market rate to the Contractor. Note: Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. [Note: Quoted rate is deemed to be inclusive for work at height and location including cost of scaffolding]
Deployment of manpower with material as on requirement basis for carrying out different type of Masonry work such as plaster work (upto 5.0 sqmtr at one place), repair/replacement of broken tiles fixed in any position (upto 2.0 sqmtr at one place), repair of brick work (upto 0.5 cum at one place), repair of PCC/hard stand (upto 0.25 cum at one place), repair of manholes, valve pits, pointing of roofs, repairs to jambs of doors, windows, coping and benching of chajjas etc, of various Md/OTM accn to entire satisfaction of Engineer-in-Charge. Note:- 1. All the bldg materials which are required to carry out necessary repair work(s), cost of transportation /handling of bldg materialand the labour element is deemed to be inclusive in quoted rates. No claim(s) by contractor in this effect will be entertained at any stage. 2. All the repair works received /assigned on a particular day will be addressed and completed on that particular day only (upto 1800 hrs) or any stipulated time given by the Engineer-in-charge. If, contractor or his tradesmen fails to attend and complete repair wks on the same day or any stipulated time given by the Engineer-in-charge, recovery shall be made double the market rate to the contractor.
Taking down carefully anodized aluminium door frame incl glazed shutters & builder’s hardware complete of area exc 2 sqm and not exc 4 sqm each of any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable component/hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.
M&L for repair to damaged RCC surfaces of chajjas, soffits of slabs, beams, columns, cantilever slabs, beams, columns, fins, stair cases, railing, etc at any height and in any position including cutting / chipping the spalling concrete surfaces and applying epoxy treatment for bonding new or old concrete surfaces and providing welded steel wire fabric mesh 75 x 25mm of weight not less than 4.0 Kg/Sqm on prepared surface with suitable pins/clamps/ welding to the existing reinforcement and applying polymer modified cementous coating on concrete surfaces prepared for guniting and finished with 40mm thick (25mm thick average) pressure Guniting in Cement mortar 1:3, applied by pressure hoses finishing the plastered surfaces with two coats of cement base paint over a coat of primer complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for work at height and location including cost of scaffolding]
S&F in repair 15mm bore, GI socket, Hex nipple, GI nipple 75mm, nipple 100mm, nipple 150mm, GI tee, GI elbow, GI reducer (15mm x 20mm), (GI reducer (15mm x 25mm) complete.
S&F in repair 15mm bore, GI union, GI tank nipple complete.
S&F in repair 20mm bore, GI socket, Hex Nipple, GI nipple 75mm, nipple 100mm, nipple 150mm, GI tee, GI elbow, GI reducer (15mm x 20mm), GI reducer (15mm x 25mm) complete.
S&F in repair 20mm bore GI Union, GI tank nipple complete.
Disconnecting & dewatering of PVC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity not exc 500 ltrs each including marking the date of cleaning with white paint and stencil all as required & directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system. (ii) Completion of complaints shall be carried out within stipulated time period to the satisfaction of Engr-in-charge & users/occupants. (iii)The rate mentioned against the items incorporates use of any material for completing the complaints to the satisfaction of user/occupants. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.
All as per item No 58.00 above but exc 500 ltr and not exc 1000 ltrs capacity.
S&F in repair bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe 410 or Fe 310 all as specified and as directed.
S&F in repair screwable plastic lid cover frame fixed arrangement with screws for existing 500/1000/2000 Litre capacity rotational moulded polyethylene water storage tanks cylindrical vertical complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.
S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.
S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girth complete all as directed.
S&F in repair ball valves of 20mm dia, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed, minimum weight - 210 gms of including taking down existing ball valves any type all as directed.
S&F in repair jet spray PVC butterfly plated for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.
S&F in repair health fusset chromium plated suitable for 15 mm bore pipe including 1M long PVC tubes for EWC complete all as specified & directed.
S&F in repair PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, complete all as specified.
S&F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as directed.
S&F in repair PVC internal fittings (kit) complete for low level flushing cistern tank all as specified and directed by Engineer-in-Charge.
S&F in repair for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed.
S&F in repair towel ring, chromium plated, fixed with brass screws and wooden/plastic cleats complete all as directed.
S&F in repair CP toilet paper holder with cover complete all as specified and directed.
S&F in repair waste coupling 32mm of PTMT (half or full threaded) (minimum wt 45 gms complete all as specified & directed.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified an directed.
S&F in repair of brass spindles, phases of brass of any size required 3/4/5 for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.
S&F in repair MS grating CP 75/100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.
S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.
S&F in repair brass chromium plated shower rose with long arm 150mm size fixed to 15mm bore pipe all as directed.
S&F in repair waste coupling for sink as per sample approved comjplete all as directed.
S&F in repair bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe `(Min. wt 90 gms) complete all as specified and directed.
S&F in repair 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in repair 15mm bore, two way angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in reapir 15mm bore, stop valve external threaded, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.
S&F in repair PVC flexible waste pipe 32/40 mm dia & approx 900 mm long with PVC waste coupling suitable for WHB, sink & urinal complete all as specified & directed.
S&F in repair brass CP wall mixer for mixing hot & cold water suitable for 15mm bore dia pipe screwed down for iron pipe and fixed copmplete all as specified and directed.
Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia.
S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as directed.
S&F PVC(SWR) Vent cowl 75mm dia complete all as directed.
S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.
All as per item No 94.00 above but fixed to walls with clamps complete all as directed.
S&F PVC (SWR) bends 75mm dia any radius complete all as directed.
S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed.
M&L complete removal of existing surfaces of wall by brooming down/scrapping, rubbing/washing including cornices, pilasters etc and applying two coats of weather proof exterior paint (Apex paint) of approved shade/tint over a coat of 2mm thick cement base exterior grade wall care putty complete all as specified & as directed. Note : (a) Contractor should deposit 75% of materials at AGE B/R-II Stores before starting the work. (b) No extra payment will paid for height of G+2 Bldg. (c) The work has to be executed in following stages and each stage shall be passed by Engineer-in-Charge (i) Stage 1 : Complete removal of old existing suraces. (ii) Stage 2 : Applying a coat of cement base exterior grade wall care putty to make smooth base of paint. (iii) Stage 3 : Applying 1st coat of Apex paint. (iv) Stage 4 : Applying 2nd /Final coat of Apex paint only after passing the stage 3 (d) Contarator should provide 5 year gurantee certificate after completion of work.
M&L preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint complete all as specified and as directed.
Complete removal and preparation of old treated surfaces of walls, plastered or unplastered by rubbing, washing with wire brush and applying two coats of cement base paint of approved shade/tint complete all as specified and as directed.
M&L preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of distemper oil emulsion of approved shade/tint complete all as specified and as directed.
M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper (OBD) of approved shed/tint over and including a coat of white wall care putty 2mm thick complete over a coat of primer.
M&L old decorated surface of wall incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed.
Complete removal and brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying two coats of white wash complete all as specified and as directed.
All as per item No 104.00 above but one coat on ceiling surfaces.
Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace finished even and smooth with out using extra cement complete all as specified and directed.
M&L preparing newly plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and directed.
M&L rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.
M&L preparation of newly plastered surafce of wall and applying two coats of weather proof exterior paint (apex paint) of approved shade /tint over a coat of JK Birla wall putty complete all as specified & as directed. Note : The work has to be executed in following stages and each stage shall be passed by Engineer-in-Charge :- (i) Stage 1 : Applying a coat of JK Birla exterior wall putty. (ii) Stage 2 : Applying 1st coat of weather coat exterior paint (Apex paint). (iv) Stage 3 : Applying 2nd /final coat of Appex paint only after passing the stage. * Contarator should provide 5 years gurantee certificate after completion of work.
M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster and cleaning all loose dust washing with water and applying bonding coat nito bond AR or equivlent of modified styrene butadiene emulsion (SBR bonding agent by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface etc complete.
M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50kg cement with 13 litre water addition finished surface to match with existing adjoining surface of ceiling, beams and alike complete.
M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete. Note : Qty of zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.
M&L writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with thick synthetic enamel paint complete all as specified.
M&L preparation of old painted wooden surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M/s S Amarjit Singh
Hitesh Construction
J.J.ENGINEERING
Radha Enterprises
M/s ASK Enterprises
shiva construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .