REPAIR TO CERTAIN WOODEN FURNITURE AND CANNING OF DIFFERENT KINDS OF WOODEN FURNITURE UNDER GE MH AND RH KHADKI

Amount

Chair Dinning (FD-279):-Removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new same components/ parts made out of 1st class hard wood as shown in drawing and directed by Engr-in-Charge.

Rear leg of size 890x55x30mm

Front leg of size 460x55x30mm

Side/Front/Rear rails of size 420x30x65mm

Stiffener (Side & Central one) of size 420x25x20mm

Back rest of size 420x45x15mm

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair dining.

Tightening of all parts/joints of whole Chair dining with bamboo pins.

PVC/hard rubber shoe

Chair Writing (FD-280) :-Removing of unserviceable/broken following parts of Chair Writing without damaging of other parts of chair writing, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.

Rear leg of size 890x30x55mm

Front leg of size 460x55x30mm

Side/Front/Rear rails 530x30x65mm

Back rest of size 530x25x20mm

Stiffener (Side & Central one) of size 530x25x20mm

Arms 470x60x25mm

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair Writing.

Tightening of all parts/joints of whole Chair Writing with bamboo pins.

PVC/hard rubber shoe

CHAIR EASY (FD-229) Removing of following unserviceable/broken parts of Chair Easy without damaging of other parts of chair, supply and fixing same new parts made out of 1st class hard wood teak as shown on drg and specified.

Front/Rear leg of size 490x55x25mm

Front/Rear stiffener.

Arms of size 610x65x25mm.

Front & back rail of seat/back of size 510x55x25mm.

Side rail of seat/back.

Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak made to shape and size complete all as specified and shown in drg and as directed by the Engineer-in-Charge.

All as per Srl. Item No. 3.06 here-in-before but back frame of chair easy.

Tightening of all parts/joints of entire Chair Easy with bamboo pins.

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair Easy.

PVC/hard rubber shoe

Table dining 6/8 persons (FD-273, FD/MAP-II/03)

M & L for removing unsv Top by Supply and fix new top of table dining 6 persons of size 1500x900mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top to table dining 6 persons of size and shape all as shown on drg.

All as per Srl. Item No.4.01 but top of Table dining 8 persons of size 1800x900mm.

Replacement of legs of table dinning 6/8 persons with new legs of size 75x40x750mm made of 1st class hard wood teak, size and shape all as shown on drg.

All as per Srl. Item No. 4.03 but long rails for 6 persons size and shape all as shown on drg.

All as per Srl. Item No. 4.03 but long rails for 8 persons.

All as per Srl. Item No.4.03 but side rails for 6/8 persons.

All as per Srl. Item No. 4.03 but wooden bracket of size 100x100x25mm for table 6/8 persons.

PVC/hard rubber shoe

Bed Plywood Top (FD-246 & 247):- Removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and directed by Engr-in-Charge.

Long rails of size 1980x900x35mm made of 1st class hard wood teak of bed plywood top.

Teak face venner ply wood 3mm thick for outer and inner sides of head board with teak wood beading half round alround of bed plywood top.

All as per Srl. item No. 5.02 here-in-before but foot board.

Supply and fixing of plywood BWR Gde as per IS:303 of size 1980 x 900 x 12mm thick (Make of Plywood:- as per Key specification)

Supply and fixing in replacement of stiffners of size 60x40x900mm made of 1st class hard wood teak of bed ply top.

Supply and fixing in replacement of complete head rest with legs of bed plywood top shape and size as shown on drg.

All as per Srl. Item No. 5.06 here-in-before but foot rest of bed plywood top.

S & F of 1st class hard wood wooden bracket of size 150x150x35mm with steel screw between the long rail and legs of head board and foot board of bed plywood top.

TABLE TOPs

M & L for removing unsv Top by supply and fix new top of table 900 x 600 x 760mm made of 18/19mm thick MDF board exterior grade including 4mm thick TW edging/beading around to top to table with or without drawers, size and shape all as shown on drg. (Make as per key specification).

M & L for replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4mm thick teak wood edging al around for TABLE WOODEN 3' x 3'. Drg No : FD-4120 / FD-1007

Table dressing Ladies with Mirror (FD-251, FD/MAP-II/07)

M & L for removing unsv looking Mirror of table dressing by Supply and fix new looking mirror of 5 mm thick (Make:- as per key specification) of size and shape as shown on drg and as directed by Engineer -in- Charge.

M & L for removing unsv frame of Mirror by Supply & fix new frame of mirror of table dressing ladies of teak wood of size and shape as shown on drg and directed by Engineer-in-Charge.

M & L for removing unsv back of table dressing mirror by Supply & fix new back of 6mm thick MR Gde plywood.

M & L for removing unsv cabinet/box by S & F of entire new cabinet/box of table dressing ladies made of 18/19mm thick Prelaminated Particale Board with 4mm thick teak wood beading all as shown on drg.

All as per Srl. Item No. 7.04 but drawers of table dressing ladies.

Chromium plated knob 25mm dia 24mm length of best quality as approved.

TABLE DRESSING GENTS :(FD-230/31)

M & L for removing unsv Looking Mirror by Supply and fix new 5mm thick looking mirror to table dressing gents (Make:- as per key specification) size and shape as shown on drg and as directed by Engineer -in- Charge.

M & L for removing unsv cabinet/box by S & F new entire cabinet/box made of 12mm thick Prelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging all as shown on drg

M & L for removing unsv drawers by Supply and fix new drawers to table dressing gents of 12mm thick Prelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging including aluminium anodise knob(dark black) all as specified and shown on drg.

M & L for removing unsv frame of mirror by Supply and fix new frame of mirror made of 1st class hard wood teak incl key plate size and shape as shown on drg.

M & L for removing unsv back by Supply and fix new back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg.

Fixing only fitting of loose / dismantaled / sagged table dressing gents to the wall with "L" Bracket (Pair) as per drg and all accessories such as screw, clips, plugs, clamps, etc complete all as directed by Engr-in-Charge. Note : Rate of bracket (pair) shall be deemed to be included in unit rate quoted.

TABLE BED SIDE (FD-276)

M & L for removing usnv table top and S & F of new table top of 18/19 mm Thick prelaminated Particle board exterior grade for of same size and shape all as per drg.

M & L for removing unsv side and S & F of new 18/19 mm Thick prelaminated Particle board exterior grade for side of table of same size and shape all as per drg.

M & L For removing unsv shelf and S & F of new 12 mm thick prelaminated Particle board exterior grade for shelf of same size and shape.

M & L for removing unsv back and S & F of new 6 mm thick BWR ply wood for back BWR grade all as specified and shown in drg.

PEG TABLE (FD-277)

M & L for removing unsv Top by Supply and fix new top of size 450x300mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround all as shown on drg. (Make of Partical board:-as per key specification)

M & L for removing unsv legs by Supply and fix new legs of size 50x30mm made of 1st class hard wood teak size & shape as shown on drg.

All as per item No 10.02 here-in-before but long batten/rail of size 40x20mm of table peg.

All as per item No 10.02 here-in-before but short rail/stiffener of size 40x20mm of table peg.

Corner made of 1st class teak wood to strengthen rail and leg all as specified by Engr-in Charge.

PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge.

SIDE BOARD (FD-1112)

M & L for removing unsv shutters by Supply and fix new pair of shutters of side board made out of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including continuous piano type hinges and hasp & stapple of size and shape all as spd and shown in drg including aluminium anodized knob as shown on drg.

All as per Srl item No 11.01 here-in-before but side of side board all as shown on drg.

All as per item No. 11.01 here-in-before but top of side board.

M & L for removing unsv bottom by Supply and fix new bottom of side board made out of only 18/19mm thick MR Gde plywood of size and shape shown on drg.

M & L for removing unsv back by Supply and fix new back of side board with 6mm thick MR Gde plywood of size and shape all as sqd and shown on drg.

M & L for removing unsv drawers by Supply and fix new drawers of side board made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg.

M & L for removing unsv shelf by Supply and fix new shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beadling all as shown on drg.

M & L for removing unsv legs by Supply and fix new leg with batten frame of side board made of 1st class hard wood teak of size and shape as shown on drg.

TABLE CENTRE (FD-274)

M & L for removing unsv by Supply and fix new top of table centre of size 900x450mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround all as shown on drg. (Make as per key specification)

M & L for removing unsv legs by Supply and fix new legs of table centre of size 60x30mm made of 1st class hard wood teak size and shape as shown on drg.

All as per Srl. item No. 12.02 here-in-before but short rail/stiffener of size 50x25mm.

All as per Srl. item No. 12.02 here-in-before but long rail of size 50x25mm.

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Table Centre.

PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge.

Teapoy:- (FD-232 & 278 & 382)

M & L for removing unsv Top by Supply and fix new top of teapoy of size 600x450mm made of 18/19mm thick Prelaminated Particale Board exterior grade including 4mm thick teak wood beading alround all as shown on drg. (Make as per key specification)

M & L for removing unsv legs by Supply and fix new legs of teapoy of size 60x30mm made of 1st class hard wood teak of size and shape as shown on drg.

All as per item No 13.02 here-in-before but short stiffener/rail of size 60x25mm and shape as per show on drg.

All as per item No 13.02 here-in-before but long batten/rail of size 50x25mm & shape as per shown on drg.

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Teapoy.

PVC/hard rubber shoe complete all as directed by Engr-in-Charge.

TABLE WRITING (FD-249 /275)

M & L for removing unsv Top by Supply and fix new top of size 1145x600mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top of table writing size and shape all as shown on drg . (Make of Partical board:-as per key specification)

M & L for removing unsv legs by Supply and fix new legs of size 55x35x750mm made of 1st class hard wood teak size and shape all as shown on drg.

All as per Srl. Item No. 14.02 but stiffners (Centre) of size 50x25x 1145mm made of 1st class hard wood teak.

All as per Srl. Item No. 14.02 but side stiffener/rails of size 50x25x550mm of Table writing.

M & L for removing unsv drawers by S & F new drawers of size (as per Drg)made of 18/19mm thick Prelaminated Particale Board natural teak face shade on front side including with 6 mm thick ply wood to bottom of drawers including aluminium anodised knob and all as shown on drg.

M & L for removing unsv box/cupboard by S & F new Box/cup board of table writing made of 18/19mm thick Prelaminated Particale Board including wall catcher size and shape all as shown on drg.

All as per Srl. Item No. 14.06 but door shutter of cupboard.

Supply and fixing with steel screw of triangular bracket of size 100x100x35mm of 1st class hard wood teak between legs and rails of Table writing.

Table 900x600x760mm with/without drawer (FD-224 & 284)

M & L for removing unsv Top by Supply and fix new top of table 900x600x760mm made of 18/19mm thick MDF board exterior grade including 4mm thick TW edging/beading alround to top to table with or without drawers, size and shape all as shown on drg. (Make as per key specification).

M & L for removing unsv legs by Supply and fix new legs made of 1st class hard wood teak of size 60x30x750mm and shape all as shown on drg.

All as per Srl. Item No. 15.02 but stiffner (centre one) of size 40x25mm .

All as per Srl. Item No. 15.02 but side stiffner.

All as per Srl. Item No. 15.02 but long rails .

All as per Srl. Item No. 15.02 but short rails .

Supply and fixing with steel screw of triangular bracket of size 100x100x35mm of 1st class hard wood teak between legs and rails of Table 900x600x760mm.

PVC/hard rubber shoe complete all as directed by Engr-in-Charge.

Table 1200 x 900mm. (FD 273)

M & L for removing unsv Top by Supply and fix new top of table dining 4 persons of size 1200x900mm made of 18/19mm thick Prelaminated Particale Board exterior grade (Make :as per Key specification) including 4mm thick TW edging alround to top to table dining 4 persons of size and shape all as shown on drg.

M & L for removing unsv legs of table dinning 4 persons by Supply and fix new legs of size 90x45x750mm made of 1st class hard wood teak, size and shape all as shown on drg.

All as per Srl. Item No. 16.02 but long rails table dinning 4 persons.

All as per Srl. Item No. 16.02 but side rails table dinning 4 persons.

All as per Srl. Item No. 16.02 but wooden bracket of size 100x100x35mm for table dinning 4 persons.

PVC/hard rubber shoe as directed by Engr in Charge.

BIN LINEN MULTIPURPOSE (FD/E6/MAP/09)

M & L for removing unsv shutters of Bin linen multipurpose by S & F new shutters made out of 18/19mm thick Prelaminated Particale Board including continuous piano type hinges and Magnatic Catcher of size and shape all as spd and shown in drg or as directed by Engr-in-Charge.

All as per Ser item No 17.01 here-in-before but side all as shown on drg.

All as per item No. 17.01 here-in-before but top.

All as per item No. 17.01 here-in-before but bottom out of only 18/19mm thick Prelaminated Particale Board of size and shape as shown on drg.

M & L for removing unsv back by Supply and fix new back with 12mm thick MR Gde plywood of size and shape all as rqd and shown on drg.

M & L for removing unsv drawers by Supply and fix new drawers made of 18/19mm thick Prelaminated Particale Board with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg.

M & L for removing unsv shelf by Supply and fix new shelf made of 18/19mm thick Prelaminated Particale Board with 6mm thick teak wood beadling all as shown on drg.

BOOK CASE (FD-45)

M & L for removing unsv Top by Supply and fix new Top of book case made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheel with 4mm thick teak wood beading alround size and shape as shown on drg.

All as per Srl. Item no. 18.01 but sides of book case.

All as per Srl. Item No. 18.01 but shutters of book case including piano hinges and aluminium anodized knob.

M & L for removing unsv bottom by Supply and fix new bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beadling all as shown on drg.

All as per Srl. Item No. 18.04 but shelf of book case.

M & L for removing unsv back by Supply and fix new back of book case made of 6mm thick MR Gde plywood all as shown on drg.

M & L for removing unsv by Supply and fix new leg with batten frame of book case made of 1st class hard wood teak of size and shape as shown on drg.

Chair Dinning Cushioned (FD/MAP-II/04):-Removing of unserviceable/broken following parts of Chair dining cushion without damaging of other parts of chair, supply and fixing same new parts as shown on drg and specified and directed by Engr-in-Charge.

12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestry cloth shall not be less than Rs. 250/- per RM).

Supply and fixing only seat cover of tapestry cloth (Tapestry cloth shall be not less than Rs. 250/- per RM).

Front leg of size 450x35x50mm

Rear leg of size 450x35x50mm

Back Vertical stripps 500x15x50mm

Back rest 450x25x45mm

Stiffener (Side & Central one) 450x20x25mm

Tightening of all parts/joints of entire Chair dining cushion with bamboo pins.

Chair Easy cushioned:- (FD-358) Removing of unserviceable/broken following parts of Chair easy cushion without damaging of other parts of chair, supply and fixing new parts made out of as shown on drg, specified and as directed by Engr-in-Charge.

12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM as approved by GE).

All as per Sr. item No 20.01 here-in-before but back of chair easy cushioned.

Supply and fixing only seat and Back cover of tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM).

Front leg of size 545x70x25mm

Rear leg of size 545x70x25mm

Back frame of size 545x55x20mm

Side rail of size 545x70x25mm

Arms of size 545x65x25mm with cushion

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair easy cushioned.

PVC/hard rubber shoe as directed by Engr in Charge.

Taking down carefully unserviceable cane from different types of chairs and other furniture articles and M&L for recaning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown & as directed by Engr-in-Charge

M/s Mitesh Agencies (BID ID -3169494)

SARGAM ENTERPRISES (BID ID -3165439)

Mahesh Traders (BID ID -3168479)