Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-AOC | ₹1.2 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹1.2 Cr+₹11,211.69 (0.10%)Rejected-Finance | ₹1.2 Cr+₹11,211.69 (0.10%) | L2 | Rejected-Finance Highest bid |
Tender Value
₹1.2 Cr
EMD Value
₹2.3 L
Closing Date
27 Jun 2020, 4:00 pmClosed
Superintendent Engineer
Konchhabhanwar, Jhansi
Construction of Gymnastic Hal at Major Dhyanchandra Stadium jhansi
2020_SCIDC_484638_1
01/se/jhansi/2020-21
Open Tender
Civil Works - Others
Item Rate
90 days
JHANSI
Please Refer the tender Document
2 documents required · 2 mandatory
₹2,600
Yes
UPSCIDCO LTD
₹2.3 L
Yes
JHANSI
16 Jan 2023
18 Jun 2020
29 Jun 2020
18 Jun 2020
27 Jun 2020
18 Jun 2020
18 Jun 2020 - 27 Jun 2020
25 Jun 2020
Amount
Labour With Material
Supply & Fixing Granite Stone 20 to 25mm thick in ramp
White cement based putty 1mm thick approved brand and making smood surfaces.
Finishing walls with two coat premium acrylic smooth exterior paint of approved quality including supply of all material, labour and T&P etc required for proper completion of work.
Providing and fixing false ceiling at all hight including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide X 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm center to center. one flange fixed to the ceiling with dash fastener 12.5 mm dia X 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25X10X0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45X15X0.9 mm running at the spacing of 1200 mm center to center, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm center to center, shall be fixed in a direction perpendicular to G.I. Intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter.
One Coat Primer and Two coat enamel painting in MS work & Wood work i/c material labour t&p
P/F of wooden wall panneling over in and i/c 2"x1.5" kailwood or equivalent wooden frame at the vertical specing 600 mm and horizontal 600 mm c/c. Glass wool of 40 mm thickness is then to be incerted in the grid which is holding with Murga jali and finaly 75mmx32mm teak wood linning i/c all necessary hardware antitermide treatment and French Police over top surface
Internal Electrification & Power Wiring
Wring point for light with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect.
Wring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sqmm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/batten holder on 3mm thick phenotic paminated backlite sheet etc. complete in all respect.
Wring point for plug with 1.5 Sq. mm FRPVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & socket etc. complete in all respect.
Supply & wiring of submains with two number 4.0 sq.mm PVC insulated 1100 V grade multistrand single core copper conductor in 20mm dia heavy duty PVC conduit with 1 no. 2.5 sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect.
Supply & wiring of submains with Four number 10.0 sq.mm PVC insulated 1100 V grade multistrand single core copper conductor in 20mm dia heavy duty PVC conduit with 2 no. 6.0 sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect.
Supply and fixing batten Holder comp. including in all rexpects
Supply and fixing LED tube light with batten suitable for 1x22 watt. LED tube Light comp. including tube complete in all rexpects cat-AAA.
S/F of 06 Amp to 32 Amp SPMCB (10KA) . CAT - A
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.
S&F surface/flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat - A
S/F Of 63 Amp. 63 Amp. FP Isolator Cat- A
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
Supply and Laying of 25x3 mm G.I Strip.
Supply and fixing hexagonal fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
S/F of 1200 mm Ceiling Fan ISI 5 Star rated
S/F of electronic regulator 120-280 V ISI Marked on existing switch board including making connection comp.
S/F of Fan sheet cover of backelite sheet
S/Laying of 'Al' conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer - Incharge, complete in all respect. The armouring of the cable ahsll be properly connected with the earth conductor by clamps etc. 120 Sqmm 3.5 Core
S/Laying of 'Al' conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer - Incharge, complete in all respect. The armouring of the cable ahsll be properly connected with the earth conductor by clamps etc. 240 Sqmm 3.5 Core
S/F of Wall Fan complete.
Supply & Fixing of LED Lamp 9 Watt
S/F of Exhaust Fan 300mm Heavy Duty
S/F of Louver Shutter 12"
Supply & wiring of submains with two number 1.5 sq.mm PVC insulated 1100 V grade multistrand single core copper conductor in 20mm dia heavy duty PVC conduit with 1 no. 1.5 sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect.
Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT - AAA
Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all espect.Cat - AAA
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 and above Protection complete in all respect. Cat - AA
Supply and errection of factory fabricated dust verming proof fidder piller having following swithes Incoming - 400 Amp MCCB - 1 No. Outgoing - 200 Amp MCCB - 1 No. 100 Amp MCCB - 2 No. . 63 Amp MCCB - 3 No.
A,C. Work
Supply and Insttalation of Cassete Type A.C. suitable for opration of AC supply 440 volt with harmeticaly siled with aircooled condensor moter capacitor and start run capacitor relay and over load protection internal unit with one indooe & one outdoor unit the condersor unit will be placed outside the room on tarrace awoid the noise. suitable capacity copper cable and a bettery oprated remote. 4 TR BEE star rated 5 star EER 3.4
Supply & Insattalation of Required lenth of copper tubing covered with insulation tube from indoor unit to outdoor unit & drain pipe complete in all respect
installation testing and commissioning of extra gas charging including drain piping elctrical.
Supply and Insttalation of Split Type A.C. suitable for opration of AC supply 440 volt with harmeticaly siled with aircooled condensor moter capacitor and start run capacitor relay and over load protection internal unit with one indooe & one outdoor unit the condersor unit will be placed outside the room on tarrace awoid the noise including standered lenth of copper tubing covered with insulation tube. suitabl capacity copper cable and a bettery oprated remote. 2 TR BEE star rated 5 star EER 3.4 ( Invertor Technology )
S & F sheet steel enclosure surface/Flush mounting fitted with 30Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge. Cat - A
S & F surface/Flush mounting 6ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. Cat - A
S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release
S/F of 40 Amp 3 Pole MCB (10KA) . CAT - A
Supply and errection of factory fabricated dust verming proof fidder piller having following swithes Incoming - 200 Amp MCCB - 1 No. Outgoing - 100 Amp MCCB - 3 No.
Supply & wiring of submains with Four number 6.0 sq.mm PVC insulated 1100 V grade multistrand single core copper conductor in 32mm dia heavy duty PVC conduit with 2 no. 4.0 sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect.
S/Laying of 'Al' conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer - Incharge, complete in all respect. The armouring of the cable ahsll be properly connected with the earth conductor by clamps etc. 70 Sqmm 3.5 Core
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
Supply and Laying of 25x3 mm G.I Strip.
5KVA Invertor work
Supply & Insttalation of 5 KVA 240 Volt Inverter Sucam/Luminous/Microtech
Supply & Insttalation of 12 Volt 150 AH Tubular Lead Acid battery with 48 month warranty fully charged complete.
Trolly for Inverter and 8 no. battery
Supply & wiring of submains with two number 6.0 sq.mm PVC insulated 1100 V grade multistrand single core copper conductor in 20mm dia heavy duty PVC conduit with 1 no. 4.0 sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect.( For Incoming Supply)
Add for Invertor Wiring in wiring Point for light/ Fan/ Plugwith 1.5 mm Cu Wire
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc.required for proper completion of work.
3 Pin Plug Top 20 Amp.250 volt
Fire Alarm work
Providing fixing testing and commissing of 08- Zone Main Control Panel, facilities like open /short circuit, fire and fault indication etc. completre with Battery charger and all other accessories strictly as per IS : 2189 As Specification with lamp test facility Agni, ECD, ASE Make.
Providing fixing testing and commissing of Apollo, Agni, System sensor make (Series-65) Photo Electric Smoke Detector as per specification compltet with junction box and base.
Providing fixing testing and commissing of Manual Call Point Break glass in metallic box complete as per IS : 2189 as specification Agni, ECD, ASE Make.
Providing fixing testing and commissing of Electronic Alarm Sounder in metallic box, complete as per IS : 2189 as specification Agni, ECD ASE Make.
Providing fixing, testing and commissing of 20 mm MS Conduit pipe as per ISI
Providing fixing, testing and commissing of 1.5 Sqmm copper conductor PVC insulated copper wire as per ISI
2 x 12 Volt 7 AH Maintenance free battry for backup support. Exide make
Providing fixing testing and commissing of Remote response, compltet as per IS : 2189 as specification with lamp test facility Agni, ECD, ASE Make.
Supply & Installation CCTV System
Supply of 2 megapixel high resolution ir Dome, Video Compression: H.265+, Built in Micro SD/SDHC/SDXC card slot up to 128GB, Progressive scan CMO, Full HD 1080p real-time video, Lens: 4mm, Up to 30mm IR visibility, True day/night, 3D DNR & DWDR & BLC, IP66 rating, PoE Make:HIKVISION/Honeywell/Eqiovalent
Supply, Installation, Testing & Commissioning of 2 megapixel high resolution IR Bullet CCTV video Compression:H.265+, Built-in Micro SD/SDHC/SDXC card slot up to 128GB, Progressive scan CMO, HD video output, Lens: 4mm, Low illumination, 3D DNR & DWDR & BLC, IP66 rating, IR range: upto 30m, True day/night PoE Make:HIKVISION/Honeywell/Eqiovalent
Supply of 16 Channel NVR 2 SATA Port network cameras supported upto 8 megapixel resolution recording, Support 1-ch VGA, HDMI at upto 4k (3840X2160) resolution, 4-ch network support H.265/H.264/MPEG4 video formats Make:HIKVISION/ Honeywell /Eqiovalent
Supply of PoE Switch 8 port, 10BASE-T/100BASE- t 4 1000BASE-T PoE Switching Capacity 16 GBPS Max. Packet Forwarding Rate 1.488 Mbps MAC Address Table 4K Make:Dlink
Supply, Installation, Testing & Commissioning of Professional display/DIGITAL SIGNAGE full HD, with superior graphic performance Diagonal size 55 inch, (16:9), Resolution n1920X1080, Dolby Digital Plus, with 2x HDMI/USB/DVI/VGA/RS232/& RJ45, full hd Make: SAMSUNG 3 years warranty
Podium Microphone Make: Sennheiser/AKG
Vocal Mic for Singing & Speech Use. Make:Behringer/AKG
Microphone for Instrument & Speech Use. Make:Behringer/AKG
Mic stand Make:Standard
SITC of Audio Rack for Power Audio Amplifiers, CD player, Mixer with Reinforced, heat-treated, tempered glass front door with security lock, all required accessories.
SITC of 2 in 6 Out digital Loudspeaker Management processor, Input Processing dbx Compression AFS (Advanced feedback suppression) Automatic Gain Control, Sub harmonic Synthesis, Noise Gate Tower Delays (Upto 1000ms per output) Make:Aerons/fidex/DBX
S/L of speaker wire 2.5 sqmm 2 core (Asian/Krystal/falcon)
S/L of speaker wire 2.5 sqmm 4 core (Asian/Krystal/falcon)
Sitc of Blue Ray Multimedia player with USB Make:Sony/Tascam/Poineer
S/L of Microphone cable from stage to control room for microphone points with conduit pipe etc.
Sitc of Podium for Microphone custom made
S/L/looping XLR to XLR lead up to 5 mtr.
S/L/looping XLR to XLR lead up to 20 mtr.
Sitc of 5 KVA online U.P.S., 30 min backup with cabinet, Trolley, Batteries rack with all required accessories Make:Eaton/BPE/ Numeric.
Supply and Installation of Digital Sinage System
Supply of Professional Display Make: Samsung/LG/Equivalant
Supply, Installation, Testing & Commissioning of MATV Cabling
Supply of Signage Software with complete system
Supply, Installation, Testing & Commissioning of Switch
S/L & Commissioning of Plastic Wire Channel Raceways Strip Make:Standard
S/L of UTP 4 pair unshielded twisted pair cable, supports Gigabit Ethernet(1000 Base-T) standerd3 Operates at a bandwith upto 250 Mhz:1 run cable, Verified compliant with EIA/TIA standards by ETL, Jacket hardness: 75 dfegree C minimum Make: Dlink
Accessories Stands, Wall Mounts. Hardware Packets, Cables, Video Switcher
Installation of digital signage solution & entire System
Supply and Installation of Acess Control System
Supply, Installation, Testing & Commissioning of Bio-metric base access control system complete with lock Make:HIKVISION/Honeywell/Eqiovalent
Sitc of 5 KVA Online U.P.S., 30 min backup with cabinet, Trolley, Batteries rack with all required accessories Make:BPE/Numeric.
M/S Arvind Kumar
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .