Construction of five storey Hostel block including Mess cum dining hall in ground floor and separate toilet bathroom blocks an septic soakage for 07 Coys at Bn Hqrs Kishtwar Balance work

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying of cement concrete 1:4:8 (1 cement : 4 coarse sand: 8 brick bats) in under floors above ground floors including all carriages and cost of material involved.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor V level, including curing but excluding the cost of centering, shuttering, finishing and reinforcement with1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size). Including all carriages and cost of materials involved.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor V-level Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Brick work with common burnt clay FPS (non-modular) bricks of class designation 75-A in foundation, plinth and all works up to floor V-level In cement mortar 1:5 (1cement: 5 fine sand). including all carriages and cost of material involved.

Half brick masonry with bricks of class designation 75 in foundations and plinth / superstructure upto floor V-level in: Cement mortar 1:3 ( 1 cement : 3 coarse sand ) including all carriages and cost of materials involved.

12/15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

6mm cement plaster on ceiling of mix: 1:3 mix (1 cement : 3 fine sand) including all carriages and cost of materials involved.

Supplying and filling in plinth with boulder /sand under floors including, watering, ramming consolidating and dressing with all carriages from source to site of work.

P/ laying vitrified floor tiles of sizes 60x60 cm of approved brand (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved and as directed by EIC complete.

Providing and fixing ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing and fixing Ist quality ceramic glazed wall tiles of size 300mmx450mm conforming to IS:15622 of minimum thickness 5mm of approved make (like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and fixing gang saw cut mirror polished (pre molded and pre-polished), machine cut for skirting, treads, Risers, landings and similar locations of required size of approved shades , colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement :4 coarse sand) with joints filled with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing molding and polishing to edge to give high gloss finish etc. complete at all levels. Granite 18mm thick.(As per the instructions of engineer in charge).

Extra for noising in treads of steps of Granite stone slab

Providing and fixing gang saw cut mirror polished (pre molded and pre-polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shades , colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement :4 coarse sand) with joints filled with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing molding and polishing to edge to give high gloss finish etc. complete at all levels. Granite 18mm thick area of slab over 05 Sqm.(As per the instructions of engineer in charge).

Providing edge molding to 18 mm/ 16mm thick Granite/Marble stone counters, vanities etc including machine polishing to edge to give high gloss finish etc (Double Molding) using glue type adhesive Araldite of Pedilite make for holding the bottom side of the molding (including cost all material, leads, lifts and carriages etc upto site of work complete.

Providing wood work in frames of doors, windows, clearstory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) with (Sal wood)

Providing 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. including all carriages and cost of material involved.

Painting with exterior emulsion paint of approved brand and manufacture (excel or apex) including priming coat with cement primer ( two or more coats) including all carriages and cost of material involved.

Applying priming coat with ready mixed pink or grey prier of approved brand and manufacture on wood work (hard and soft wood) including all carriages and cost of material involved.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on new work including priming coat and cost of material involved.

Providing and fixing of G I pipes complete with G I fittings (Prakash surya make) complete Job and other G I fittings & PVC pipes and fittings (Supreme/ Prince make).

G I pipe 15mm external

G I Pipe 20mm external

G I Pipe 25mm external

G I Pipe 15mm internal

PVC Pipe 100mm

PVC Pipe 75mm

PVC Bend 100mm

PVC Bend 75mm

100mm Tee

75mm Tee

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing water closet squatting pan ( Indian type W.C. Pan ) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing of stainless steel kitchen sink size (610x460) bowl depth 20mm with C.I brackets, C.P. brass chain with rubber plug, 40mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing of C P Bib Cock long body (Hindware, Jaguar or equivalent).

Providing and fixing of C P Bib Cock short body (Hindware, Jaguar or equivalent).

P/F wash basin pedestal with C.I. / M.S. brackets, 15mm C. P brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: flat back white vitreous china wash basin size 630x450mm with a pair of 15mm C. P. brass pillar taps.

Providing and fixing of C P Angle valve body (Hindware, Jaquar or equivalent).

Providing and fixing of Soap case (CP) heavy duty / standard make.

Providing and fixing of floor trap 3” heavy duty / standard make.

Providing and fixing of PVC Connection heavy duty / standard make.

Providing and fixing of C P Nipple heavy duty / standard make.

Providing and fixing of C P Cup heavy duty / standard make.

Providing and fixing of C P Grating heavy duty / standard make.

Providing and fixing of looking Mirror heavy duty / standard make.

Providing and fixing of C P brass toilet paper holder heavy duty / standard make.

Providing and fixing of soil, waste and vent pipes: 100mm dia, sand cast Iron S and S Pipe as per IS: 1729.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

Providing and Installation of electric water Motor of Crompton make having 0.5 HP including all fittings complete.

Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour.

Providing and fixing waste Pipe for wash basin and sink of approved quality and colour flexible pipe.

Providing and fixing of Ball valve 25mm of approved / standard make.

Providing and fixing of Ball valve 20mm of approved / standard make.

Providing and fixing of union 25mm of approved / standard make.

Providing and fixing of union 20mm of approved / standard make.

Providing and fixing of Tank Nipple of approved / standard make.

Providing and laying of water proofing treatment in Sunken portion of WC’s bathroom etc by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/sqm. This layer will be allowed to air cure for 4 hours. (b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hour followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

M/s UMAR BASHIR

Mushtaq Ahmad Renzoo

SUKH DEV SINGH

M/S Zahoor Ahmad Khan